+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: NEW cambelt & 266mm calipers (pads & discs) (/showthread.php?tid=14705)
NEW cambelt & 266mm calipers (pads & discs) - puglove - 15-06-2013
New cambelt & tensioners, I fitted this and as most of you know gave up on the project so its ran on idle for like a total of 10 mins. never even put under load. £20 bargin!
Also my 266mm calipers from a HDI, GOOD discs, half worn pads, need new bleed nipples. £SOLD
266mm calipers, New Xud Cam belts
http://306oc.co.uk/forum/thread-14705.html
XUD exhausts
http://306oc.co.uk/forum/thread-14570.html
aftermarket spoiler
http://306oc.co.uk/forum/thread-13370.html
bosch pump & lines
http://306oc.co.uk/forum/thread-14649.html
Xud full fmic
http://306oc.co.uk/forum/thread-14593.html
RE: NEW cambelt & 266mm calipers (pads & discs) - Chris_90 - 15-06-2013
Might be interested in the brakes, when you say need new nipples are they free? So the can be replaced?
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 15-06-2013
Yeah they are free but rounded to f*ck... I took had to bleed with grips lol, can take them out and take a pic to prove if needed. can also bring to fcs rather than posting if paid up front
RE: NEW cambelt & 266mm calipers (pads & discs) - Piggy - 15-06-2013
bugger man.
Shuda had a look round ya garage...would have had them hdi brake right off ya!
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 15-06-2013
were still on the car mate. this is it now lol
I don't think that was a twin optic I gave you either, I found another ph1 head light today ,think its the twin .hey its almost getting close to worth another trip down now
RE: NEW cambelt & 266mm calipers (pads & discs) - Piggy - 15-06-2013
whats the shell like? lol!
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 15-06-2013
BIG motherf*cking rust hole in the quarter!!
RE: NEW cambelt & 266mm calipers (pads & discs) - Piggy - 15-06-2013
oh poo
RE: NEW cambelt & 266mm calipers (pads & discs) - strictly_perv - 15-06-2013
Interested in the belt and tensioners, assuming it's for an XUD?
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 15-06-2013
Yup indeed it is
RE: NEW cambelt & 266mm calipers (pads & discs) - strictly_perv - 15-06-2013
What make is it? I get paid next week so I'll get the money sent if you still have it.
RE: NEW cambelt & 266mm calipers (pads & discs) - Piggy - 15-06-2013
if derv dont want the kit...dibs
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 16-06-2013
Only branding i can sre on the belt is 'gates' came from euro car parts
RE: NEW cambelt & 266mm calipers (pads & discs) - Piggy - 16-06-2013
gates is goooood
RE: NEW cambelt & 266mm calipers (pads & discs) - Chris_90 - 16-06-2013
Yer can you get a pic of the calipers please
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 16-06-2013
Sorry chris but I sold these today.
RE: NEW cambelt & 266mm calipers (pads & discs) - Chris_90 - 16-06-2013
(16-06-2013, 04:53 PM)puglove Wrote: Sorry chris but I sold these today.
Ok mate no worrys
RE: NEW cambelt & 266mm calipers (pads & discs) - Piggy - 18-06-2013
post the cambelt n idlers??
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 18-06-2013
I can do but waiting to hear back from jake
RE: NEW cambelt & 266mm calipers (pads & discs) - Piggy - 18-06-2013
ok. dibs if jake no wanty
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 18-06-2013
yep no worries
RE: NEW cambelt & 266mm calipers (pads & discs) - puglove - 05-07-2013
bump for belt