+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: running a semi ecu bosch pump without the ecu?? (/showthread.php?tid=14073)
running a semi ecu bosch pump without the ecu?? - vee-dubber - 22-05-2013
im putting a 406 1.9xud into my 306, i didnt realise the fuel pump was semi ecu. is it possible to run the pump without the ecu? iv read that its possible to do but difficult, does anyone know how its done??
inb4 just get a mech pump..
RE: running a semi ecu bosch pump without the ecu?? - THE_Liam - 22-05-2013
It should work, but you won't have the dynamic advance function iirc...
RE: running a semi ecu bosch pump without the ecu?? - vee-dubber - 22-05-2013
(22-05-2013, 08:45 PM)THE_Liam Wrote: It should work, but you won't have the dynamic advance function iirc...
will the car run ok without it? :? whats the purpose of the dynamic advance function?
RE: running a semi ecu bosch pump without the ecu?? - THE_Liam - 22-05-2013
It controls what stage of the combustion process the fuel is injected at. I'd just get a manual pump mate
RE: running a semi ecu bosch pump without the ecu?? - darrenjlobb - 22-05-2013
It will run, but thats about it, smoke up high / gutless as frig, unless you run tonnes of static, in which case itl sound like a tank, in other words, dont bother!
RE: running a semi ecu bosch pump without the ecu?? - vee-dubber - 22-05-2013
(22-05-2013, 08:59 PM)vee-dubber Wrote:(22-05-2013, 08:45 PM)THE_Liam Wrote: It should work, but you won't have the dynamic advance function iirc...
will the car run ok without it? :? whats the purpose of the dynamic advance function?
where would the best place to get one? scrap yard or just buy a donor? also what cars should i be looking out for that the pump came on?
RE: running a semi ecu bosch pump without the ecu?? - THE_Liam - 22-05-2013
I could sell you one?
RE: running a semi ecu bosch pump without the ecu?? - Mal - 23-05-2013
Here's what one sounds like without the ECU
I should know, that's one I'm somewhat assembling
RE: running a semi ecu bosch pump without the ecu?? - vee-dubber - 23-05-2013
I'v decided to run with the semi-ecu pump with the ecu, I'v got the ecu and the plug, so all i need to do now is fathom out the loom :? took off the gearbox today, release bearing slipped past the fork,,, heard a loud clang when i pried the gearbox off, does the release bearing go in the pressure plate or is it just left outside it? is that why some peugeots have heavy clutches cos people havent put them back together properly before?
RE: running a semi ecu bosch pump without the ecu?? - Mal - 26-05-2013
(23-05-2013, 11:33 PM)vee-dubber Wrote: I'v decided to run with the semi-ecu pump with the ecu, I'v got the ecu and the plug, so all i need to do now is fathom out the loom :? took off the gearbox today, release bearing slipped past the fork,,, heard a loud clang when i pried the gearbox off, does the release bearing go in the pressure plate or is it just left outside it? is that why some peugeots have heavy clutches cos people havent put them back together properly before?
Save yourself the hassle and get a 306 pump. Don't faff about with semi-ecu!
Forks go behind the bearing, rotate them back in when the box goes back. XUD clutches are naturally heavier due to the pull type effort