+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project Village Bike (/showthread.php?tid=13809)
Pages:
1
2
Project Village Bike - Sambarker - 14-05-2013
Ok quick thread to keep people in the loop.
Bought (that's right not brought) the car from Anton who got it off joe and apparently there were at least one or two previous forum members before him so its been round a bit.
Intention is for it to replace the 309 as parts are getting hard to source and are expensive, plus live for the 306 bla bla
It's getting morettes, completely ph1'ing inside and out, mainly back to standard. Then getting hooned abused etc possibly with a nurburgring trip thrown in for good measure
![[Image: image.jpg]](http://s145.photobucket.com/user/sambarker88/media/image.jpg.html)
![[Image: image-1.jpg]](http://s145.photobucket.com/user/sambarker88/media/image-1.jpg.html)
![[Image: image-2.jpg]](http://s145.photobucket.com/user/sambarker88/media/image-2.jpg.html)
Engine out, no messing!
![[Image: image-3.jpg]](http://s145.photobucket.com/user/sambarker88/media/image-3.jpg.html)
RE: Project Village Bike - Midnightclub - 14-05-2013
Good to see it's staying on the forum, although shame about the 309.. that was epic
Project Village Bike - Frosty - 14-05-2013
Nice to see it getting saved!
Project Village Bike - THE_Liam - 14-05-2013
What's happened to the 309?!?!
Project Village Bike - td_dan - 14-05-2013
Looks a good project mate do you need anything else with these lights as im breaking ph1 at the min
RE: Project Village Bike - Poodle - 14-05-2013
Another wanting to know whats going on with the 309!
RE: Project Village Bike - kernow_joe - 14-05-2013
it lives on, what was up with the engine? was it still a dhy block in there?fyi I bought this from a .net member who owned it a few years unsure about before him
RE: Project Village Bike - Anton - 14-05-2013
Was good to meet you yesterday mate. So glad its not being being scrapped!
The crank pulley had snapped off.
RE: Project Village Bike - Dum-Dum - 14-05-2013
Another "whats happening to the 309?"
is it for sale and if so how much
Project Village Bike - Sambarker - 14-05-2013
309 getting broken for bits
Project Village Bike - td_dan - 14-05-2013
Id be interested in a few bits for the 205 id your breaking mate
Project Village Bike - Sambarker - 14-05-2013
Such as? Lot of stuff already on eBay
Project Village Bike - td_dan - 14-05-2013
Whats your ebay name
Cage, buckets, harnesses, running gear etc
Project Village Bike - THE_Liam - 14-05-2013
Nooooooo!!!
Project Village Bike - Sambarker - 14-05-2013
(14-05-2013, 01:16 PM)td_dan Wrote: Whats your ebay name
Cage, buckets, harnesses, running gear etc
Sam-barker on eBay
Cage might be sold to maxtait
Buckets harnesses going in 306
Engine and front mount aswell
Got a dt box with modified gear arm for 205/309 along with modified driveshafts.
Pair of 16mm 306 hubs I was going to fit
206 coilovers on 205 gti hubs
205 uprated shocks with lowering springs
205 gti subframe and roll bar
309 gti wishbones are on eBay
Got a straight through exhaust but bit of a mash up of various pipe but would fit 205 as front pipe is 205
Where abouts you from dan?
Project Village Bike - td_dan - 14-05-2013
Arrr im watching that cage at the minute lol
The dt box what diff is it running as im using the standard stdt shafts which are the same a the 1.6 gti ones
Project Village Bike - Sambarker - 14-05-2013
Box has a 306 diff. O/s shaft is a 1.9 n/a 309 shaft and n/s is a 309 gti shaft with a 306 hdi inner cv. Obviously I couldn't use 205 shafts due to them not being long enough
Project Village Bike - td_dan - 14-05-2013
Ok mate, in assuming with the modified arm were able to use the standard clutch cable then? How much for the box?
Project Village Bike - Sambarker - 14-05-2013
It's the arm for the gear selectors that's been modified. The clutch cable is a 205 one and almost new which you can have too.
If your wanting the box and shafts ill do you a swap with some ph1 bits if you like?
Project Village Bike - td_dan - 14-05-2013
Only need the box and yeah that sounds good to me mate just let me know you need
RE: Project Village Bike - HDIkyle - 14-05-2013
Set the record for engine removal now have to beat that when taking it out of the 309
Project Village Bike - Sambarker - 14-05-2013
(14-05-2013, 08:39 PM)HDIkyle Wrote: Set the record for engine removal now have to beat that when taking it out of the 309
Seen that video on YouTube of the golf engine removal? Lol
RE: Project Village Bike - Pete - 15-05-2013
Shame the 309's getting broken up, However much love for the phase 1.
RE: Project Village Bike - devils_fuel - 15-05-2013
(14-05-2013, 12:35 PM)Sambarker Wrote: 309 getting broken for bits
that will raise a lot funds i bet sam
RE: Project Village Bike - Poodle - 15-05-2013
Be sorry to see that 309 go, properly heroic car. Selling the trailer complete?
Look forward to seeing what you do to this, better crack on, its got a lot to live up to.
RE: Project Village Bike - kernow_joe - 15-05-2013
what engine spec did you get this with?
from pics looks like the pumps gone, t25 still there?
Project Village Bike - Sambarker - 15-05-2013
Pump and injectors gone, t25 still there and hdi box
RE: Project Village Bike - HDIkyle - 15-05-2013
(14-05-2013, 09:02 PM)Sambarker Wrote:(14-05-2013, 08:39 PM)HDIkyle Wrote: Set the record for engine removal now have to beat that when taking it out of the 309
Seen that video on YouTube of the golf engine removal? Lol
I have now lol. engine might have more than a cracked sump after that tho!
Project Village Bike - Sambarker - 20-05-2013
RE: Project Village Bike - Jenkosowls - 20-05-2013
Phs1 ftw! Glad to see bits of the old girl going on other monster projects