+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: Bosch pump help (/showthread.php?tid=13697)
Bosch pump help - mikey b - 10-05-2013
Hi all changede pump from Lucas to bosch few months ago all fine slightly
Hard to start but all fine then other day would not start had to prime loads
Found out that the throttle lever is leaking on the spindle can you get new seals easy how much and what's it like to change any help would be good
RE: Bosch pump help - Danny2009 - 10-05-2013
Have to remove the top of the pump, they sell kits on eBay iirc
RE: Bosch pump help - kernow_joe - 10-05-2013
if you find the gov mod guide that will guide to removig the lid/top and removing the throttle splindle, is a pretty easy job
RE: Bosch pump help - Tom - 10-05-2013
Should gov mod it whilst your there. I made a thread on this just below, might be worth a read before you get stuck in, save you pulling your hair out over it lol. My advice is just be bloody gentle and dont force anything because you will just snap shit up!
RE: Bosch pump help - mikey b - 10-05-2013
Makes sense to gov mod while the top is of any one got a link to eBay
RE: Bosch pump help - Tom - 10-05-2013
Bosch VE Seal Kit. Dont think you can buy just that o ring alone.
RE: Bosch pump help - Jimbo - 10-05-2013
15.99 I think they are, gotta be better to sort seal rather than putting Lucas back on