Will Ph2 Side Repeaters Fit Ph1?! - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: Will Ph2 Side Repeaters Fit Ph1?! (/showthread.php?tid=13687) |
Will Ph2 Side Repeaters Fit Ph1?! - 306Brad - 10-05-2013 Is the wiring loom the same? Cheers fellas RE: Will Ph2 Side Repeaters Fit Ph1?! - Mattcheese31 - 10-05-2013 wiring is same but holes in wings are different so get ready to get the dremel out . . RE: Will Ph2 Side Repeaters Fit Ph1?! - puglove - 10-05-2013 wirering is different matt!! dont mod the wings. file the plastic down on tue repater its self and remove the holding tab on the non springy side. iv got a pic some where. RE: Will Ph2 Side Repeaters Fit Ph1?! - Mattcheese31 - 10-05-2013 well i wonder how i put phase 2 repeaters on my phase 1 then?? . . . . .Hmmmmm Will Ph2 Side Repeaters Fit Ph1?! - 306Brad - 10-05-2013 Easy ladies! Ill buy some anyway and if the wiring is different ill go to the scrappy to get the loom. Cheers boys RE: Will Ph2 Side Repeaters Fit Ph1?! - Mattcheese31 - 10-05-2013 (10-05-2013, 07:58 PM)306Brad Wrote: Easy ladies! Ill buy some anyway and if the wiring is different ill go to the scrappy to get the loom. haha just saying. . . . . .maybe someone else changed it RE: Will Ph2 Side Repeaters Fit Ph1?! - puglove - 11-05-2013 (10-05-2013, 06:45 PM)Mattcheese31 Wrote: well i wonder how i put phase 2 repeaters on my phase 1 then?? . . . . .Hmmmmm it a totaly different plug on my ph1 yours must be a fake ph1 from the transition period betwewn ph 1&2 Will Ph2 Side Repeaters Fit Ph1?! - 306Brad - 11-05-2013 Wish I chopped the loom off my old 306 before I scrapped it haha fail! RE: Will Ph2 Side Repeaters Fit Ph1?! - Mattcheese31 - 11-05-2013 (11-05-2013, 07:29 AM)puglove Wrote:(10-05-2013, 06:45 PM)Mattcheese31 Wrote: well i wonder how i put phase 2 repeaters on my phase 1 then?? . . . . .Hmmmmm doubt it on an "N" plate . . . .must have been previous owner then, it didn't have original ones on when i got her and i changed them again . . |