+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Stupid question thread (/showthread.php?tid=13619)
Stupid question thread - Jukie88 - 07-05-2013
How would I make et45 wheels for my pug, sorry for being abit stupid with this question but would I need spacers and if so how big ??
Stupid question thread - Jonny b - 07-05-2013
Fecking big spacers lol
RE: Stupid question thread - Ruan - 07-05-2013
Very fooking big spacers!!!
If they were the same width as cyclones, theyd need 30mm spacers to fit!!
RE: Stupid question thread - puglove - 07-05-2013
UHHHHH just don't!!
Or if you do make sure you get the type that bolt to the hub then bolt the wheel to the spacer type jobbys
Also if your trying to get a stanced look (as you were before so guessing this is still the case) 45mm spacers
Stupid question thread - Jukie88 - 07-05-2013
Hmmmm those seem like some big ass spacers sod that might find another set of alloys with a smaller ET
RE: Stupid question thread - Dum-Dum - 07-05-2013
Cyclone offset is ET18, smaller wheels are ET20-24, its measured in MM so should give you an idea.
RE: Stupid question thread - Niall - 07-05-2013
(07-05-2013, 07:57 PM)Dum-Dum Wrote: Cyclone offset is ET18, smaller wheels are ET20-24, its measured in MM so should give you an idea.
There ET16. At least im pretty sure mine are stamped ET16!
RE: Stupid question thread - Scott - 07-05-2013
Well either way, a 306 has ET15-18 wheels as standard, so you're looking at a 30mm spacer in order to fit the wheels at the correct offset.
RE: Stupid question thread - Toms306 - 07-05-2013
What do they come off with such a tiny offset lol?
RE: Stupid question thread - Scott - 07-05-2013
You could also ask why Fords came with such a large offset
RE: Stupid question thread - Niall - 07-05-2013
(07-05-2013, 08:18 PM)Scott Wrote: You could also ask why Fords came with such a large offset
But to Tom, unless its Golf spec, its shit and useless. Guess what Tom?
VWs are shit!!! Yeah i said it. What are you going to do about it!!
Stupid question thread - Jukie88 - 07-05-2013
They were a set of speedlines of a Audi Quattro s2
RE: Stupid question thread - Toms306 - 07-05-2013
(07-05-2013, 08:22 PM)Niall Wrote:(07-05-2013, 08:18 PM)Scott Wrote: You could also ask why Fords came with such a large offset
But to Tom, unless its Golf spec, its shit and useless. Guess what Tom?
VWs are shit!!! Yeah i said it. What are you going to do about it!!
Wait....there are 'other' car manufacturers?
But seriously, I just thought there was like an 'average' of 20ish, maybe I'm completely wrong with that then.
RE: Stupid question thread - Scott - 07-05-2013
(07-05-2013, 08:31 PM)Jukie88 Wrote: They were a set of speedlines of a Audi Quattro s2Interesting idea
Could be worth looking into a stud and nut conversion for them? You might get lucky and be able to run them with a 20mm spacer with a bit of arch work.
RE: Stupid question thread - Eeyore - 07-05-2013
(07-05-2013, 09:19 PM)Scott Wrote:(07-05-2013, 08:31 PM)Jukie88 Wrote: They were a set of speedlines of a Audi Quattro s2Interesting idea
wrong way round isnt that Scott? 20mm and they would be well in the arch?
You could get them and run 30mm spacers but spacers do get quite expensive. You want 30mm bolt on not the 30mm extended nut ones.
RE: Stupid question thread - cwspellowe - 07-05-2013
(07-05-2013, 07:04 PM)Jonny b Wrote: Fecking big spacers lol
Pfft, 30mm is nothing, ask Ecosse
I say go for it with the wheels. Something different, f*ck normal.
Stupid question thread - Jukie88 - 08-05-2013
The wheels are already 4x108 all or most old skool audis are it's just 30mm to mee seems abit excessive
I'll also need spigot rings as the centre bore is 66.3
RE: Stupid question thread - puglove - 09-05-2013
spigot rings are pennies what J are they?
RE: Stupid question thread - Kezzieboy - 09-05-2013
http://www.willtheyfit.com/
Stupid question thread - Jukie88 - 10-05-2013
7j I believe