306oc - Peugeot 306 Owners Club & Forum
engine swap stock hdi vs 406 110 - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: engine swap stock hdi vs 406 110 (/showthread.php?tid=13561)



engine swap stock hdi vs 406 110 - hdi shaun - 06-05-2013

As stated im looking at doin a engine swap. Whats the difference between the 2 mounts electrical conections pipe work etc. Any info is appriciated


RE: engine swap stock hdi vs 406 110 - Poodle - 06-05-2013

Absoutely no difference apart from the fmic on the earliest ones iirc, i think the later ones were multiplexed - ie a massive pita to wire up and get working.


RE: engine swap stock hdi vs 406 110 - hdi shaun - 06-05-2013

Same age 406 110 engine should be a straight swap then i.e mines a t plate sp same year straight swap


RE: engine swap stock hdi vs 406 110 - Poodle - 06-05-2013

Should be, have you found a low mileage one or something? If not there's very little point mate, a lot of work for no gain.


RE: engine swap stock hdi vs 406 110 - hdi shaun - 06-05-2013

Ye i have found one with just over 60k


RE: engine swap stock hdi vs 406 110 - Ruan - 06-05-2013

Considering you'd need to fit the ECU out of the 110 - you're going to have fun without de-immobilising the ECU as I'll put money on the BSIs not being compatible...

Very pointless task IMHO - unless you're PURELY fitting the engine, using your stock ECU and having it remapped.


RE: engine swap stock hdi vs 406 110 - Dum-Dum - 06-05-2013

The engine is a straight swap but youll need your turbo off the 90


RE: engine swap stock hdi vs 406 110 - Poodle - 06-05-2013

As above tbh, although if you're going to do it with a low mileage one i'd be inclined to do all the belts etc anyway while it's out of the car, purely because it'll take 1/10th of the time to do thanks to access lol. Be rude not to go for a proper fmic while you're there as well, turbo change would be easier too... Wink


RE: engine swap stock hdi vs 406 110 - Eeyore - 06-05-2013

make sure you do a guide if you do it!


RE: engine swap stock hdi vs 406 110 - hdi shaun - 06-05-2013

Will i was thinking y its out hybrid iveco turbo fmic and 2.2 hdi pump ready for remap. Ye if i do go ahead i will defo do a guide.


RE: engine swap stock hdi vs 406 110 - puglove - 06-05-2013

if you engine hasnt got any issues it really isnt worth it. been there done that myself and id of been better off keepimg the higher milage enigine in it. there is no power to be gained out of fitting the 406 engine that ypu wouldnt get out of the 306 engine


RE: engine swap stock hdi vs 406 110 - Dum-Dum - 06-05-2013

Yeah, get the new engine built up with turbo, pump, new belts, clutch and fluids and make sure its prefect before dropping in.