+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: anyone in cannock or Stafford willing to lend me a 35mm socket? (/showthread.php?tid=13544)
anyone in cannock or Stafford willing to lend me a 35mm socket? - no2lurch - 05-05-2013
Pretty please!
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - Dum-Dum - 05-05-2013
Ive got a 36mm (hub nut size) that ill lend you if you put a deposit down on it but your proably a bit far away.
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - no2lurch - 05-05-2013
I thought hub nuts were 35?
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - Connor - 05-05-2013
They are 35, 36 works though lol
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - no2lurch - 05-05-2013
What's the best technique for getting undone?
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - zx_volcane - 05-05-2013
Jack car, remove wheel
Remove split pin from hub to reveal nut
Refit wheel and lower car back to ground
Get your socket on hub nut with bar
Support knuckle of bar with jack / axle stand
Get some scaffold tube to use as a long extension
And undo the nut!
I use 36mm as its all I've got, but its never slipped or rounded
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - Toms306 - 05-05-2013
An impact gun...or a mate to stand on the brakes.
Putting the wheel back on didn't work for me.....obviously it doesn't work with 'clones, so I tried swallows and the 36mm didn't fit through the centre cap hole!
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - Connor - 05-05-2013
Didn't have the spare tom? Or was the spare a clone?
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - Toms306 - 05-05-2013
(05-05-2013, 02:38 PM)Connor Wrote: Didn't have the spare tom? Or was the spare a clone?
Not with me no, spare was a swallow at the time.
Whipped it straight off with the impact gun though so wasn't a huge issue tbh.
RE: anyone in cannock or Stafford willing to lend me a 35mm socket? - swampy - 05-05-2013
Halfords have them on the shelf