+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: Decat problems (/showthread.php?tid=13328)
Decat problems - Steve922 - 28-04-2013
Sorry for another thread on this topic but i can not find a answer to my problem. After much debate on doing this, i decided to go ahead so been and a bought a decat pipe and 2 middle sections (one to replace the back box). got under the car and went to remove the 2 10mm bolts from the cat pipe but they dont seem to come off, they just keep turning round
, so am i missing something? plz help
RE: Decat problems - Poodle - 28-04-2013
Seen the proper studs replaced with a nut and bolt arrangement before, could be you need a spanner/socket on the other end.
RE: Decat problems - Steve922 - 28-04-2013
ive tried this but a spanner does not fit the other end of the stud, the stud does not turn but the nut just turns without coming off if that makes sense
RE: Decat problems - Poodle - 28-04-2013
Cut it off then, new fitting kit is only £8 from your local motor factors.
Decat problems - Steve922 - 29-04-2013
Nice one think ill get down there later after work
Decat problems - Frosty - 29-04-2013
You might need a crank spanner to get on the bolt properly
Decat problems - Steve922 - 03-05-2013
Managed to get some new bolt cost a fiver in total lol so gonna cut the old ones off. Thanks for the info guys ill let you know how I get on