Cully's Bianca 6 R150 YVM - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Cully's Bianca 6 R150 YVM (/showthread.php?tid=13188) |
RE: Cully's Bianca 6 R150 YVM - lewisdmz - 08-05-2013 (08-05-2013, 08:12 AM)cully Wrote: oh dear..... Why the hell are the n/s and o/s rad clips different prices lol! These are the ones that bolt into the slam panel and hold the rad/condenser in place? Also I didn't think you could buy the throttle body gaskets individually anymore. Bonus. RE: Cully's Bianca 6 R150 YVM - cully - 08-05-2013 yes they are the rad clips had the phone call to say the cars ready for collection from stockland . Mot is booked for 12o'clock tomorrow so collecting my m8 @ 9am to collect the car as he has garage insurance to drive anything getting exited now may be driving it tomorrow RE: Cully's Bianca 6 R150 YVM - cully - 08-05-2013 i might have found an inlet manifold under my pillow last night it would be roude not to get it looking nice before its fitted tapped out the resinator hole to 1"bsp pressure washed the manifold off washing out all the swarf before fitting a 1" bsp plug sealed it with hydrolic threadlock RE: Cully's Bianca 6 R150 YVM - ozonehostile - 08-05-2013 Bringing this to weston mate? RE: Cully's Bianca 6 R150 YVM - cully - 08-05-2013 fingers crossed if it passes its MOT tomorrow and i get the insurance in time RE: Cully's Bianca 6 R150 YVM - cully - 09-05-2013 well ive had a little setback! collected the car from having the beam done then we dropped it off for the mot at the second station we had done all the work on the last fail sheet less than Cat but that wasnt going to be a problem had a phone call from the mot place saying the car had failed! what! looks like the first MOT station has stopped the test once he had a few fails not giving me a complete list to work from! im fealing a little done over at the moment the new list is front ball joints and a wheel bearing and a few other bits so the car wont be ready for sunday im just hopeing i can sort something within the 10 days free retest period hopeing its not an issue with the hubs being ovaled! i also need a GTI6 radiator rocker can you help there? RE: Cully's Bianca 6 R150 YVM - Midnightclub - 09-05-2013 Sneaky bugger! bad times mate RE: Cully's Bianca 6 R150 YVM - declantg - 09-05-2013 What a lady garden! Re: Cully's Bianca 6 R150 YVM - rocker8742 - 09-05-2013 That's a shitter mate, I do have a spare rad with the bottom hose incase its different, offered it to Matt but he doesn't seem too interested lol RE: Cully's Bianca 6 R150 YVM - Connor - 09-05-2013 I have a spare o/s hub if it is ovaled, I would also go back to the first place and ask them what the f*ck they were playing at... RE: Cully's Bianca 6 R150 YVM - Niall - 09-05-2013 This ^^ I would also be asking for a partial refund seeing as they did a partial test without telling you. RE: Cully's Bianca 6 R150 YVM - Connor - 09-05-2013 Or take it back for mot there... You replaced everything they failed it on... Re: Cully's Bianca 6 R150 YVM - rocker8742 - 09-05-2013 £216 if you want the rad from the stealers lol RE: Cully's Bianca 6 R150 YVM - cully - 09-05-2013 connor i will have that hub off you please is it the hub from Dum-dum tonight ? rocker yes im interested in the rad and i have priced up a new the reason the guy might have missed the front is the test was done on an autotest bed and as the rear beam was so shot computer missed the fronts and i couldnt go back for the retest! note it didnt fail on the emmisions RE: Cully's Bianca 6 R150 YVM - sweeney1987 - 09-05-2013 (08-05-2013, 12:01 PM)lewisdmz Wrote: Why the hell are the n/s and o/s rad clips different prices lol! These are the ones that bolt into the slam panel and hold the rad/condenser in place? This is due to most accidents occuring to the front passenger side of the car, hence they charge more to make more money, simple economics Thats a pure shitter about the mot. Did you not feel play in driving though? i know i did when my hubs were ovalled out! RE: Cully's Bianca 6 R150 YVM - cully - 09-05-2013 (09-05-2013, 08:10 PM)sweeney1987 Wrote: Thats a pure shitter about the mot. to be honest i have only driven it back from when i bought it with the fecked beam that was lively enough at the rear each time since it has been driven by someone else under garage insurance as i am not yet covered to drive the car RE: Cully's Bianca 6 R150 YVM - Matt - 09-05-2013 (09-05-2013, 04:02 PM)rocker8742 Wrote: That's a shitter mate, I do have a spare rad with the bottom hose incase its different, offered it to Matt but he doesn't seem too interested lol Yep I am, did you see my thread response? RE: Cully's Bianca 6 R150 YVM - devils_fuel - 10-05-2013 paul thats a ******!!!! I would contact the garage owner and advised them unless you receive a partial refund on the test you will report the MOT tester/company to the DVLA for only completing a partial test but charging you for the complete test which is illegal as they have charged you for a service but have not provided the service under the contract - from memory they should complete the test regardless if it fails within 5 mins as that is the contract you agree to - my tester always completes any MOT even if the car fails RE: Cully's Bianca 6 R150 YVM - Poodle - 10-05-2013 As above, first garage f*cked up, make them pay for it. RE: Cully's Bianca 6 R150 YVM - cully - 10-05-2013 i didnt present the car my m8 did in his garages name its his issue i think the mot station will be loosing a lot of buisness for his mistake! and on a side note! this GTI6 has 16mm balljoints with abs! things are still moving on RE: Cully's Bianca 6 R150 YVM - cully - 10-05-2013 todays exploits started at 8am loaded the car with tools enought to strip a 306 went to a local metal dealer that has a Ph1 and Ph3 sat up for spares scrappy didnt open till 830 wanted an early start. any way the Ph3 has everything i need but the guy wouldnt let me touch it cause its in a field and the evirement agency dont like him breaking away from his yard. it had 18mm hubs and wishbones confirmed this by measuring the ball joint. he wouldnt move this car so ive given him my phone number when he does and im in there! so back to my m8s garage to the bianca nothing on the ramp so got the car on to check out the ball joints/hubs for ovals 16mm hubs and joints and the play is in the joint only........ so on the phone 2x 16mm balljoints 2x front brake hose 1x front wheel bearing ordered! in the mean time i went through the rest of the list o/s side repeater to dark with a coating (swapped for the estate) n/s side repeater to dark with a coating (swapped for the estate) o/s indicator showing white not orange (new orange lamp) rear numberplate lamp (cleaned terminals) then my m8 asked why i wernt stripping the front end down so by 1pm when i left for work i had replaced both ball joints removed the O/s hub reasembled the N/s things left were press in the bearing refit hub remove fit 2x brake hoses as of 6pm the car was done thanks to friends who i owe a beer or two unfortunatly the MOT station was closed so no retest the story continues..................................... Cully's Bianca 6 R150 YVM - Jonny b - 10-05-2013 Good luck with it fella! Will be sweet when done RE: Cully's Bianca 6 R150 YVM - Niall - 10-05-2013 Will drive like a brand new car when done!! Still a right shit situation though. Hopefully it will get through it's free retest with flying colours. RE: Cully's Bianca 6 R150 YVM - cully - 10-05-2013 yup should get through the retest as were going back to the second mot station oh the wheel bearing was so stiff you couldnt turn the hub by your hand! pictures time we all love them! refurbed beam insitu pics have also picked up my inlet manafold gasket and other bits from the stealers today! oh and a little thankyou gift for my m8 at the garage shhh keep it a secret he dont know yet RE: Cully's Bianca 6 R150 YVM - cully - 11-05-2013 well today im smileing again!! went to the brokers got my insurance now i can drive the 6 when its finished! went out to the garage 6 was done! but no mot and ben said i wouldnt drive that far with that Radiator! oh no! i was going to pick up a rad from rocker at the weston meet tomorrow.... good job i trapped rockers mobile number, phone call later im on the way to Honiton to collect a radiator and bottom hose. i must say a big thankyou to rocker (Tom) for turning out the whole shed just to find the bottom hose good job he did as mine on the car was different! so now ive cut out the aircon rad as that was dead and fitted a newer rad and hose these cars are a bitch to bleed! now its 1230 and have a MOT retest at 1245 i eventualy roll up at 1250 not bad going! I now have insurance aFull MOT with 1 advisory oil leak cool beans!! RE: Cully's Bianca 6 R150 YVM - Niall - 11-05-2013 about bloody time! RE: Cully's Bianca 6 R150 YVM - Tom - 11-05-2013 What a lovely car! Fair play to you for putting the time and money into it! You've really rescued this one! Re: Cully's Bianca 6 R150 YVM - rocker8742 - 11-05-2013 Nice one mate glad i could help hope to see it nice and shiney tonight Nice one mate glad i could help hope to see it nice and shiney tomorrow RE: Cully's Bianca 6 R150 YVM - cully - 11-05-2013 Just been out for a nice cruse to Exmouth wife had a paddle in the sea ah feck that shit this is a car forum this car is feckin awsome! im going to have to learn to drive petrol all over again that limiter comes up real quick on these short ratios nothing like a derv RE: Cully's Bianca 6 R150 YVM - Kezzieboy - 11-05-2013 You're such an old f*cking hooligan Paul legend |