306oc - Peugeot 306 Owners Club & Forum
306 2.1td inside [[[portuguese project]]] - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: 306 2.1td inside [[[portuguese project]]] (/showthread.php?tid=13095)

Pages: 1 2

306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 22-04-2013

hello my friends im here to learn more about my car and to know opinions and share experiences i will show my project with photos

everything started here its a ph 1 from 1994 360.000km already done


[Image: img244s.jpg]



then a few things changed
[Image: img012tn.jpg]



[Image: img023dy.jpg]


stearing wheel


[Image: img035s.jpg]



new speedo (remember the seats the doors and the floor carpet colour for the next photos)


[Image: img20120522094753.jpg]



new back lights ph2/ph3


[Image: img20120620212833.jpg]




new midle

[Image: img20120704124115.jpg]



new seats


[Image: img20120713184920.jpg]



new wheels


[Image: img20120725182454.jpg]


[Image: img20120727154812.jpg]



new and last speedo


[Image: img20120803113153.jpg]




then clean the interior and new carpet in blue from the s16 model
[Image: img20120805165241.jpg]



[Image: img20120805174825p.jpg]




new gear knob

[Image: 20120828110003.jpg]



new bumper and already painted and ph3 look


[Image: imagem1794.jpg]



[Image: dsc00036ko.jpg]




[Image: dsc00038ky.jpg]
and already with spoiler






[Image: dsc00049je.jpg]



new things

[Image: 20120926155212.jpg]



wheel painting

[Image: dsc00053ig.jpg]



already in the place (still small brakes)


[Image: cam00009.jpg]



big brakes peugeot 307 xsi 286mm or 283mm i always confused


[Image: cam00025.jpg]



winner of picture of the month in the portuguese forum the theme was trafic signs


[Image: cam00042c.jpg]



new doors with electric windows


[Image: cam00061.jpg]



new lip from 307 hdi


[Image: cam00066l.jpg]



side skirts from hdi


[Image: img168e.jpg]


[Image: img171z.jpg]



[Image: img172o.jpg]



small testing for future ideas


[Image: cam00148.jpg]



i forgot to mention that at this moment already was with disk brakes on the back and lower and repared suspension and back windows tinted

[Image: cam00150.jpg]




tow strap
[Image: cam00151r.jpg]




and now engine swap
the old 1.9 xad with 360.000 km done


[Image: img009q.jpg]



on the way to come out


[Image: img013zq.jpg]




and now the 2.1 from an citroen xm 110bhp 120.000km done
[Image: img016ul.jpg]




[Image: img018xc.jpg]
in place for testings


[Image: 1364350097442.jpg]



[Image: 1364350098492.jpg]



[Image: 1364350303171.jpg]



[Image: 1364350816077.jpg]



out for painting the inside

[Image: img051ec.jpg]



[Image: img060hw.jpg]


back to the place with some parts of the engine already painted and gearbox
[Image: img068vo.jpg]

~

[Image: img073fk.jpg]



i will give updates for now videos running on test the quality its not really good on the first one but gieves you an idea and its running without exhaust





RE: 306 2.1td inside [[[portuguese project]]] - Piggy - 22-04-2013

what pump is on the 2.1?!?! its huge!

your also a lucky git with loads of room that we dont have because the steering UJ and master cylinder isnt in the way of the rear of the engine...

I see you had to remove a far bit of bulkhead still though!

how did you make the ph2/3 window switches work on the ph1 wiring??

and nice project, looks very sweet

RE: 306 2.1td inside [[[portuguese project]]] - ginge191 - 22-04-2013

Great project, and looks awesome to have a group of mates helping out; 5 of you?!

Nice to see where the car was to what I is now!

RE: 306 2.1td inside [[[portuguese project]]] - Matt - 22-04-2013

That looks sweet!




Anyone else notice the dash? Lack of upper glovebox? Across the sea option only?

RE: 306 2.1td inside [[[portuguese project]]] - puglove - 22-04-2013

nice work fella . turned a 306 bag of shite into a really nice example of a 306 top work. you really turned this little pug around ThumbsUp

RE: 306 2.1td inside [[[portuguese project]]] - Hdiestate - 22-04-2013

I do love a white pug nice 1 fella.

RE: 306 2.1td inside [[[portuguese project]]] - silverzx - 22-04-2013

(22-04-2013, 07:45 AM)puglove Wrote: nice work fella . turned a 306 bag of shite into a really nice example of a 306 top work. you really turned this little pug around ThumbsUp

Agreed!

RE: 306 2.1td inside [[[portuguese project]]] - the milkman - 22-04-2013

Awesome this mate, so did they happen to actually do much engine tuning over seas or just boy?

RE: 306 2.1td inside [[[portuguese project]]] - ozonehostile - 22-04-2013

Awesome, this is like a combination of all my favorite things, tidy bianca white 306 and an xud11 Smile

RE: 306 2.1td inside [[[portuguese project]]] - akuma406 - 22-04-2013

Buenas Fabio, gran trabajo, yo soy de españa, y tambien tengo un 2.1 td, en el que voy mejorando.
Curiosa bomba le as puesto, que es?

Good Fabio, great job, I'm from Spain, and also I have a 2.1 td, which I'm getting better.
Curious as you pump because that is?

RE: 306 2.1td inside [[[portuguese project]]] - moonstoneblue - 22-04-2013

i would also like to know how you got the window switches to work with the phase 1 wiring loom ?

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 22-04-2013

(22-04-2013, 06:34 AM)Piggy Wrote: what pump is on the 2.1?!?! its huge!

your also a lucky git with loads of room that we dont have because the steering UJ and master cylinder isnt in the way of the rear of the engine...

I see you had to remove a far bit of bulkhead still though!

how did you make the ph2/3 window switches work on the ph1 wiring??

and nice project, looks very sweet
i don't know wich is the pump it's original in that engine and is bosch

all the wiring on the window was new because i had manual before

thanks cheers
(22-04-2013, 07:13 AM)ginge191 Wrote: Great project, and looks awesome to have a group of mates helping out; 5 of you?!

Nice to see where the car was to what I is now!
the true is i control this project at distance because im in england and the car is in portugal so im not there to do the things not even in the picture because was my brother that toke the picture and send it to me by mail
(22-04-2013, 07:24 AM)Matt Wrote: That looks sweet!




Anyone else notice the dash? Lack of upper glovebox? Across the sea option only?
thanks

to be honest i prefer this dash instead of the one with the upper glovebox because is more "clean" and avoid more noise
(22-04-2013, 07:45 AM)puglove Wrote: nice work fella . turned a 306 bag of shite into a really nice example of a 306 top work. you really turned this little pug around ThumbsUp

thanks matte it was really bad in the beginning but now its almost the way i want it
(22-04-2013, 11:02 AM)the milkman Wrote: Awesome this mate, so did they happen to actually do much engine tuning over seas or just boy?

my engine will not be tuned but i have a friend that will put the same engine and will tune it in portugal now everyone is tunning their cars engine and visual especially seat ibiza peugeot 306 and all kind of petrol hondas and also the old golf's mk1 mk2 diesel engine
(22-04-2013, 12:22 PM)ozonehostile Wrote: Awesome, this is like a combination of all my favorite things, tidy bianca white 306 and an xud11 Smile

thanks i really like white but if i could choose a colour it would be the blue from the renault sport but 306 for me its everything
(22-04-2013, 01:00 PM)akuma406 Wrote: Buenas Fabio, gran trabajo, yo soy de españa, y tambien tengo un 2.1 td, en el que voy mejorando.
Curiosa bomba le as puesto, que es?

Good Fabio, great job, I'm from Spain, and also I have a 2.1 td, which I'm getting better.
Curious as you pump because that is?

gracias amigo, i don't know wich pump is this one but came original with the car, the car was automatic gearbox and i think it had automatic air induction i think that's way its a litle different
(22-04-2013, 02:20 PM)moonstoneblue Wrote: i would also like to know how you got the window switches to work with the phase 1 wiring loom ?
as i said before was completly new because before was manual windows

RE: 306 2.1td inside [[[portuguese project]]] - Ben - 22-04-2013

Gorgeous car, all your works paid off!

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 23-04-2013

(22-04-2013, 09:30 PM)Ben Wrote: Gorgeous car, all your works paid off!

thanks mate
i have a question and if someone know's the aswear please tell me

the 6 speed gearbox from the gti6 fix on this engine?(citron xm 2.1rd 110bhp)

RE: 306 2.1td inside [[[portuguese project]]] - ozonehostile - 23-04-2013

the gti6 box does fit yes but its not a great idea, youl be revving the tits off the engine just at normal road speeds sue to the difference in gearing between petrol and diesel engines. they also don't handle the torque too well

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 24-04-2013

(23-04-2013, 11:28 PM)ozonehostile Wrote: the gti6 box does fit yes but its not a great idea, youl be revving the tits off the engine just at normal road speeds sue to the difference in gearing between petrol and diesel engines. they also don't handle the torque too well

so from wich car do you think is better? i want a gearbox for big travels not to be fast in 1/4 mile that's why i was thinking about the 6 speed

do you have any idea/sugestion?

thanks

RE: 306 2.1td inside [[[portuguese project]]] - ozonehostile - 24-04-2013

(24-04-2013, 12:45 AM)fabiosilva16 Wrote:
(23-04-2013, 11:28 PM)ozonehostile Wrote: the gti6 box does fit yes but its not a great idea, youl be revving the tits off the engine just at normal road speeds sue to the difference in gearing between petrol and diesel engines. they also don't handle the torque too well

so from wich car do you think is better? i want a gearbox for big travels not to be fast in 1/4 mile that's why i was thinking about the 6 speed

do you have any idea/sugestion?

thanks

use a 306 hdi gearbox, its what ive got on my 2.1 sedan and its perfect for that engine

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 25-04-2013

(24-04-2013, 05:03 AM)ozonehostile Wrote: use a 306 hdi gearbox, its what ive got on my 2.1 sedan and its perfect for that engine
that was the first idea but its not easy to find in portugal expecially at good price thanks mate ThumbsUpThumbsUp

RE: 306 2.1td inside [[[portuguese project]]] - Piggy - 25-04-2013

second to the hdi box...

they cheap as chips here! £40-50.

worth finding one though

RE: 306 2.1td inside [[[portuguese project]]] - devils_fuel - 25-04-2013

i love this car, so clean and looks almost new now Smile

RE: 306 2.1td inside [[[portuguese project]]] - Jarrus - 02-05-2013

Doesn't it just......^^^^

Nice job mate, I bet no one believes you that is done that amount of miles/km's...
Also did you get the petrol S16 tacho to work?

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 13-06-2013

(25-04-2013, 06:32 AM)Piggy Wrote: second to the hdi box...

they cheap as chips here! £40-50.

worth finding one though

really for that price?? where can i find it?
news in the car the safe was painted in white and now looks like new
[Image: img060hw.jpg]

Uploaded with ImageShack.us

engine back to place with painted parts to
[Image: img068vo.jpg]

Uploaded with ImageShack.us
[Image: img073fk.jpg]

Uploaded with ImageShack.us

[Image: img097o.jpg]

Uploaded with ImageShack.us

[Image: img100qs.jpg]

Uploaded with ImageShack.us
now waiting for a bigger radiator and a new gearbox then will go to fit a new exhaust

RE: 306 2.1td inside [[[portuguese project]]] - Seid' - 13-06-2013

mate, your car is ugly.. cumps

RE: 306 2.1td inside [[[portuguese project]]] - Piggy - 13-06-2013

looking good chap...

whats that UFO thing on the PAS pump?!

any clearance issues with the 2.1?

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 13-06-2013

(13-06-2013, 09:08 PM)Seid Wrote: mate, your car is ugly.. cumps

go to the portuguese forum seid ahahah
(13-06-2013, 09:12 PM)Piggy Wrote: looking good chap...

whats that UFO thing on the PAS pump?!

any clearance issues with the 2.1?

is the vacuum pump for the brakes


for now the only problem is the radiator need a new one and i need a gearbox from a 2.0hdi engine this one is to short the max speed is 170km/h with this one wich is nothing for this engine

RE: 306 2.1td inside [[[portuguese project]]] - Piggy - 13-06-2013

weird.

my 2.1 vacuum is on the end of the cam like the xud9

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 13-06-2013

(13-06-2013, 09:56 PM)Piggy Wrote: weird.

my 2.1 vacuum is on the end of the cam like the xud9

i know and most of the 2.1 is in the same place i don't know why this one is there and i bought this engine in portugal but was from a car with gb plate but steering wheel on the left ao i think that car was made to be different lool

RE: 306 2.1td inside [[[portuguese project]]] - fabiosilva16 - 18-07-2013

only 75 days for this machine come to uk then you will see the news (wheels gearbox...etc etc)

RE: 306 2.1td inside [[[portuguese project]]] - Piggy - 18-07-2013

exciting!

RE: 306 2.1td inside [[[portuguese project]]] - Dum-Dum - 18-07-2013

Will be cool, try and make it to our christmas meet if your still over here then.