Jake's Black PH1 DTuuuurbo. - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Jake's Black PH1 DTuuuurbo. (/showthread.php?tid=122) |
Re: Jake's Black PH1 DTuuuurbo. - Diggers - 05-04-2012 didnt pirtek want £100 for the oil line? and how mucht the turbo cost? you get it from iprezza breaker next to SHITREN? Jake's Black PH1 DTuuuurbo. - Jake - 05-04-2012 No sca wanted that and told me pirtek would just bring it to them never heard anything good about sca though !!!, & yeah got turbo from cit-ren. Re: Jake's Black PH1 DTuuuurbo. - strictly_perv - 05-04-2012 Looking good. What have you got planned for the down pipe? Re: Jake's Black PH1 DTuuuurbo. - declantg - 05-04-2012 you should of gone david yarham mate Jake's Black PH1 DTuuuurbo. - Jake - 05-04-2012 declantg Wrote:you should of gone david yarham mate What for the turbo? Don't even know where that is! Also have you still got that tow strap! & not sure yet Max, haven't put it all together yet so don't know if anything needs chopping yet... Will update tomorrow!! Re: Jake's Black PH1 DTuuuurbo. - declantg - 05-04-2012 its literally down the road and round a corner ! so much cheaper, and yes i do saving it for ye Jake's Black PH1 DTuuuurbo. - Jake - 05-04-2012 declantg Wrote:its literally down the road and round a corner ! so much cheaper, and yes i do saving it for ye Good man! & will have to check it out next time I'm up there for anything! Re: Jake's Black PH1 DTuuuurbo. - Dum-Dum - 05-04-2012 Just out of interest how much did pirtek charge and how did you find them seen as i suggested them on FB for you. also my BMW has a TD04 fitted as standard Jake's Black PH1 DTuuuurbo. - Jake - 06-04-2012 Dum-Dum Wrote:Just out of interest how much did pirtek charge and how did you find them seen as i suggested them on FB for you. £34.95 bud, and dan sorted it really but they were very quick, emailed in afternoon and picked it up in the evening, looks alright too Your Bimmer probably has a few more horses than mine as standard! But unlike some I live for the 306.... Traitor! GTFO with your German shiiiite.. :racecar: Ly really dum Re: Jake's Black PH1 DTuuuurbo. - 4WayDiablo - 06-04-2012 What kinda psi you going for? Thought about hdi rods to get the best from the td04 Re: Jake's Black PH1 DTuuuurbo. - mark_airey - 06-04-2012 4WayDiablo Wrote:What kinda psi you going for? Thought about hdi rods to get the best from the td04 Why (in your vast tuning experience) would he need hdi rods to get the best from it? Lol Re: Jake's Black PH1 DTuuuurbo. - 4WayDiablo - 06-04-2012 mark_airey Wrote:Haha erm.... dunno4WayDiablo Wrote:What kinda psi you going for? Thought about hdi rods to get the best from the td04 Lol all I know is pushing a tdo4 is going into bendy con rod area Matty went hdi rods on his td04 on some good boost I know your running over 30 psi but I'd say hdi rods re safer than standard ones no? Re: Jake's Black PH1 DTuuuurbo. - Dan! - 06-04-2012 Standard rods, living on the wild side. Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 so why are the HDI rods better? Re: Jake's Black PH1 DTuuuurbo. - Dan! - 06-04-2012 Stronger/less likely to snap. Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 how much would a set cost from a scrappy you reckon? Re: Jake's Black PH1 DTuuuurbo. - Dan! - 06-04-2012 From a scrappy probably £70+ I expect. Find somebody whos got a HDi with a dead engine and they will probably sell them for like £40-50 if you can remove them yourself. Not needed on a GT15 though dude Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 i dunno man, im pushing some seeeeeerious boost Re: Jake's Black PH1 DTuuuurbo. - 4WayDiablo - 06-04-2012 declantg Wrote:i dunno man, im pushing some seeeeeerious boostGet it lowered first... Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 dont worry, have just drawn up a list of what im getting and which order Got a few things no one has done before Re: Jake's Black PH1 DTuuuurbo. - Dan! - 06-04-2012 On topic - Just finished tea and about to go back out to finish off Jakes adapter plates. Turns out if your using a GT15 exh. mani (which we are) then you dont actually need an adapter plate, they almost just bolt together And the exh. outlet to downpipe adapter is almost finished, just needs a bit of tidying up and 3 more holes drilling Hopefully get this bastard back together tomorrow! :twisted: Re: Jake's Black PH1 DTuuuurbo. - ash23 - 06-04-2012 70 sound for rods from a scraps , one near me charged alot less than that but i had to remove them just so happens i have a set for sale Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 you dont need an adapter plate for a gt15mani? Re: Jake's Black PH1 DTuuuurbo. - Dan! - 06-04-2012 Ash, scrappies obviously vary in prices. Thats what id expect to pay at my local ones! And nope dec', just a grinder! :twisted: Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 well i can grind Re: Jake's Black PH1 DTuuuurbo. - Dan! - 06-04-2012 :o :o Jake's Black PH1 DTuuuurbo. - Jake - 06-04-2012 declantg Wrote:well i can grind Will probably need a bigger grinder than the one you're used too , Anyway on topic! Some good progress made today ! Big thank you to dan! & his dad for all the help ! Also took apart my k14 and found this just after the air intake! Yes that's a fu king stone =O Whaaaaat! Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 you running defilter? Re: Jake's Black PH1 DTuuuurbo. - Dan! - 06-04-2012 He wasnt on the K14! Re: Jake's Black PH1 DTuuuurbo. - declantg - 06-04-2012 how the hell did a stone get in there! |