+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Electrics (https://www.306oc.co.uk/forum/forumdisplay.php?fid=23)
+--- Thread: slim line fan (/showthread.php?tid=11939)
slim line fan - Piggy - 15-03-2013
what do most do about the original fan connection and triple relay when fitting a slim line fan???
ta for input
RE: slim line fan - Piggy - 15-03-2013
no thoughts doods?
RE: slim line fan - zx_volcane - 16-03-2013
im sure there are threads and wiring diagrams up on this already
RE: slim line fan - Piggy - 16-03-2013
ok...I'll keep searching....I searched, obviously didnt input the right words!
RE: slim line fan - zx_volcane - 16-03-2013
Well basically you are either going to wire it into existing loom (ie two wires) or make up your own circuit on a switch which was discussed here recently
RE: slim line fan - Piggy - 16-03-2013
I want it on current circuit...auto...
but its a single slim line...and theres two originally...
thinking to just use the switched live...earth...via rad switch straight to the fan?
just wondered if others had problems/wrong way to do it
RE: slim line fan - Dum-Dum - 16-03-2013
Just use the wires that come from the tripple relays to run a fan or 2 depending on how many fans you had as standard.
To test which is pos and neg pull the temp sender plug and bridge 2 of the pins and theyll start to spinn if they work then you can test them with a multimeter.
RE: slim line fan - C2K - 16-03-2013
My mate wired my rallte up with twin slimlines as per haynes manual twin fan with rad switch. Made a custom loom that worked a treat.