306oc - Peugeot 306 Owners Club & Forum
Rear Callipers - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Rear Callipers (/showthread.php?tid=11598)



Rear Callipers - Connor - 04-03-2013

Looking on Bigg red for a refurb kit and they list 2 options, I was under the impression that all rear callipers were the same? Now the 2 they list sasy 93-97 and 97-onwards, so ph1 and ph2/3, so I can safely assume which kit to buy. Just wondered what the difference was?


RE: Rear Callipers - samass - 04-03-2013

Lucas and Bosch I think


RE: Rear Callipers - Connor - 04-03-2013

Nope, theyre all listed as "BEN" Bendix


RE: Rear Callipers - samass - 04-03-2013

Hmm, weird. I had Lucas ones on the xsi, and a spare Bosch one kicking about...


RE: Rear Callipers - Connor - 04-03-2013

Le strange. Never mind


RE: Rear Callipers - samass - 04-03-2013

Standard Peugeot eh


RE: Rear Callipers - C2K - 05-03-2013

Might well be piston size. There are 30mm variants and 32mm variants from memory - does it give a caliper piston seal diameter?

GTi/HDi only came with 32, think the 30s were for Saxos and such and possibly the P1s I don't know.


RE: Rear Callipers - Connor - 05-03-2013

Oh now that you say that, I can almost remember reading something along those lines before. Ill give them a quick measure before I order them


RE: Rear Callipers - DeeTurbo - 05-03-2013

(05-03-2013, 07:18 AM)C2K Wrote: Might well be piston size. There are 30mm variants and 32mm variants from memory - does it give a caliper piston seal diameter?

GTi/HDi only came with 32, think the 30s were for Saxos and such and possibly the P1s I don't know.

That is spot on, They are 30'2 on the phase 1's