Number plate fixings - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: Number plate fixings (/showthread.php?tid=11453) |
Number plate fixings - Slam Wagon - 28-02-2013 Im not wanting to put holes in my plate and screw it on or use a surround. Other than double sided tape is there any other 'clean' looking way to fix it that you have used? Cheers Ian RE: Number plate fixings - Oil-burner - 28-02-2013 I used no more nails sticky pads for my pressed plates mate, not going anywhere RE: Number plate fixings - Eeyore - 28-02-2013 I used double sided foam on mine. They have it behind the counter area at halfords! used to get it in reels from Focus but obviously that doesnt exist now. Did find some in B&Q though! Its fine on teh back but the front falls off because of the bend so you may need to pre bend your plates Also in the hot weather they fell off and Mr Policeman wasnt happy about them being in the window so told me to put them on again! since then i have gone for the plate holders. Also means you can swap your plates for shows etc! RE: Number plate fixings - Slam Wagon - 28-02-2013 Ive just got some halfords tape for now. If it fails ill find somethin else. Cheers RE: Number plate fixings - Toms306 - 28-02-2013 I used pads and my front plate has been hanging off for the last 3 months now...........either that means its shit cos half didnt stick, or its awesome cos it hasnt completely fallen off and hold with just one or two pads.... RE: Number plate fixings - Willo - 28-02-2013 I used halfords trim tape on mine stayed there for 5 years RE: Number plate fixings - samass - 01-03-2013 velcro RE: Number plate fixings - bigcheez2k3 - 01-03-2013 I used double sided foam for mine, stayed on there for ~18 months. Had to use the hairdryer and a knife to remove them when I binned the bumpers last week. RE: Number plate fixings - Danny2009 - 01-03-2013 tigerseal /thread RE: Number plate fixings - bigcheez2k3 - 01-03-2013 I'll add that mine were pressed plates, so easy to bend along the curvature of the front bumper. RE: Number plate fixings - Kezzieboy - 04-03-2013 Generic number plate sticky pads from ebay RE: Number plate fixings - Jonny81191 - 04-03-2013 welder direct onto the bonnet? Number plate fixings - ash240970 - 05-03-2013 Adhesive vinyl number plate on the bonnet - covers stone chips and you can then have a smooth front bumper |