306oc - Peugeot 306 Owners Club & Forum
idle speed adjusted car slower? - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: idle speed adjusted car slower? (/showthread.php?tid=11370)



idle speed adjusted car slower? - Jimbo - 26-02-2013

Does that sound right or should it have no affect on performance. removed cold start cable adjusted hot idle screw now car feels slower?

Any ideas


RE: idle speed adjusted car slower? - Piggy - 26-02-2013

shouldnt do...

sure got right screw??

unless was stuck on cold all time before and then it would be have been bit richer


RE: idle speed adjusted car slower? - Mattcheese31 - 26-02-2013

no shouldn't do mate, turn max fuel up a bit if you're needing a bit more poke Smile


RE: idle speed adjusted car slower? - Jimbo - 26-02-2013

Yeah I think it was slightly on cold start all the time I've upped the max fuel and gone up to around 900rpm idle rather than 750/800 rpm kept trying to stall itself. Also seem to have come up against wastegate' pump adjustment saw 17psi now im guessing adjust wastegate until about 20psi.no matter how much fuel in it will not exceed 17 that sound about normal

Cheers


RE: idle speed adjusted car slower? - Mattcheese31 - 26-02-2013

(26-02-2013, 07:18 PM)Jimbo Wrote: Yeah I think it was slightly on cold start all the time I've upped the max fuel and gone up to around 900rpm idle rather than 750/800 rpm kept trying to stall itself. Also seem to have come up against wastegate' pump adjustment saw 17psi now im guessing adjust wastegate until about 20psi.no matter how much fuel in it will not exceed 17 that sound about normal

Cheers

yes it does mate, also just so you know i live with a 1100rpm idle . .Wink


RE: idle speed adjusted car slower? - con67 - 28-02-2013

Still getting full 'throttle'/pedal? Might need to move the ckip on the cable...