+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: had a bad day :( (/showthread.php?tid=11330)
had a bad day :( - the milkman - 25-02-2013
So I finally had time and someone with a van to come to leeds with me and get the engine off liam.
All is going well got it pretty much stripped and then come to pop the drive shafts out and realise I left the socket at home along with my deep sockets so got it all ready to come out and got stopped by the stupid f*cking drive shafts
worst thing is liam was at work so had no way of getting a grinder ect!! Rantover
RE: had a bad day :( - Piggy - 25-02-2013
just pop the inner joints apart...
take the boots off and pull!!!
leaves the inner shafts in the box
RE: had a bad day :( - gretsch-drummer - 25-02-2013
You weren't far from Machinemart either. About a 5 minute drive.
RE: had a bad day :( - CJ_Derv - 25-02-2013
FAIL!!
RE: had a bad day :( - Scott - 25-02-2013
RE: had a bad day :( - karl1989 - 25-02-2013
Im only round corner. Did`nt you get it in the end?
RE: had a bad day :( - the milkman - 25-02-2013
Worst thing is was on a time limit :/ and cj not cool man
and karl I Thought you was sheffield? And nope ran out of time, got it ready to pull out in an hour all apart from shafts :/
RE: had a bad day :( - Connor - 25-02-2013
Could have just unbolt the engine mount bracket and left the shafts in the hubs
RE: had a bad day :( - the milkman - 25-02-2013
Undid the mounts and the angle of shafts wouldn't let it move :/
RE: had a bad day :( - Connor - 25-02-2013
You werent doing it right then
RE: had a bad day :( - karl1989 - 25-02-2013
(25-02-2013, 08:03 PM)the milkman Wrote: Worst thing is was on a time limit :/ and cj not cool man
lol no im in bradford. About 10mins away from liam