phase1 onto phase2 front end - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22) +--- Forum: Interior, Exterior, ICE (https://www.306oc.co.uk/forum/forumdisplay.php?fid=12) +--- Thread: phase1 onto phase2 front end (/showthread.php?tid=10607) |
phase1 onto phase2 front end - davieboy-rfc-1690 - 07-02-2013 i was wondering if anyone can help me with the wiring of the headlights as i plan to upgrade from phase 1 to phase 2 or a step by step guide would be much apreciated RE: phase1 onto phase2 front end - ozonehostile - 07-02-2013 Why phase 2? Surely if yoi want to swap the front end phase 3 would look better? But whatever floats your boat. Wiring the lights isn't too much of a pain, just get your new lights with as much of the donar car loom as possible, makes re wiring far easier. RE: phase1 onto phase2 front end - Bananalad - 07-02-2013 Dont, just dont. RE: phase1 onto phase2 front end - davieboy-rfc-1690 - 07-02-2013 (07-02-2013, 05:23 PM)Bananalad Wrote: Dont, just dont. someone took out my front end its hard to get phase 1 bits iv been offered a full front end off a gti same colour so for cost reasons it makes sense i will fully restore it when the finances improve phase1 onto phase2 front end - Sambarker - 07-02-2013 Buy a multimeter for about 10 quid and work it out! RE: phase1 onto phase2 front end - puglove - 07-02-2013 Hold out for a phase 1 dude, would be ashame to ph2 it RE: phase1 onto phase2 front end - davieboy-rfc-1690 - 07-02-2013 (07-02-2013, 05:28 PM)Sambarker Wrote: Buy a multimeter for about 10 quid and work it out! and a box of fuses lol RE: phase1 onto phase2 front end - Bananalad - 07-02-2013 (07-02-2013, 05:26 PM)davieboy-rfc-1690 Wrote:(07-02-2013, 05:23 PM)Bananalad Wrote: Dont, just dont. Sick one, claim off there insurance and get the bits? RE: phase1 onto phase2 front end - davieboy-rfc-1690 - 07-02-2013 (07-02-2013, 05:30 PM)Bananalad Wrote:they kindly left without leaving their details so ill just fix it instead of claiming my own(07-02-2013, 05:26 PM)davieboy-rfc-1690 Wrote:(07-02-2013, 05:23 PM)Bananalad Wrote: Dont, just dont. RE: phase1 onto phase2 front end - Bananalad - 07-02-2013 Unless your getting the bits very cheap id wait for the phase 1 bits, save wiring headlights and all.. RE: phase1 onto phase2 front end - davieboy-rfc-1690 - 07-02-2013 (07-02-2013, 05:35 PM)Bananalad Wrote: Unless your getting the bits very cheap id wait for the phase 1 bits, save wiring headlights and all.. everything i need for £70 its a no brainer and gets me on the road again RE: phase1 onto phase2 front end - davieboy-rfc-1690 - 08-03-2013 turned out to be a straight forward easy change over pics to follow |