+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: 306 hdi disc beam on d turbo (/showthread.php?tid=10394)
306 hdi disc beam on d turbo - Jake949 - 02-02-2013
Managed to find a disc beam with no camber or play for a decent price. Since my beams on the way out thought I'd upgrade to go with the gti6 brakes on the front. When I had a look above the spare wheel carrier on my d turbo I have 2connector unions for the brake pipes, but the hdi only seems to have the one? Just wandering if I'm seriously missing something out here, but there was one connector in the same place as on my car, but the other wasn't in sight, just a straight brake line.
Also are the hdi torsion bars and arbs a different thickness to a standard d turbo drum ones? Just wandering weather it would be worth swapping the bars and everything over if they are smaller.
Any help appreciated, thanks.
RE: 306 hdi disc beam on d turbo - londondan86 - 02-02-2013
There should be 2 brake pipes coming from under the car which will ether go straight to the flexi's via the beam or to the compensator if there is one.
As for the torsion bar, the '6 beam and the estate has thicker bars than the rest of the range although not sure about hdi's
RE: 306 hdi disc beam on d turbo - Jake949 - 02-02-2013
No compensator on it because its phase 3, I could see one connector but not one for the other pipe, have a better look tomorrow when I take it off the car.
So the handling won't be any worse than with a standard drum axle then?
RE: 306 hdi disc beam on d turbo - londondan86 - 02-02-2013
No, definitely won't be worse. Might be worth doing the axle bushes while your there.
Where in north wales are you bud?
RE: 306 hdi disc beam on d turbo - Jake949 - 03-02-2013
I met you in wrexham a few months back mate, I'm from corwen
RE: 306 hdi disc beam on d turbo - Birk - 03-02-2013
Leave the gti6 arb in, it's alot thicker and thus stiffer.