+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Londondan's Black Supercharged XUD New Video Inside!! :D (/showthread.php?tid=6065)
RE: Londondan's Black Supercharged XUD Back on the road :D - PartyJas - 02-07-2014
Cool. I'll drop you a PM when i get to 20 posts lol
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 29-07-2014
Small update but sometimes even the smallest of updates can be interesting to read!!
I've been sorting gauges today,
2 boost - one pre charger and one after
Oil pressure - plumbed in and working
Oil temp - not working, unsure why at the moment
EGT - The gauge is just a cheep Chinese jobby but the sender is the one which Darren left in the manifold so i assume will be of a decent quality but it doesn't work
It does work when connected to the sender that came with the gauge but I do't really want to use it. Also the cheep gauge cycles through the colours continuously which is disappointing I thought that I would be able to choose between the 7 colours available?[attachment=18013]
[attachment=18014]
[attachment=18015]
[attachment=18016]
Had a major power steering leak a few days ago too which turned out to be the front cooler? It had rusted right through and had given up permanently! So... I cut the f*cker off and bypassed it, anyone had to to this before? Will there be any issues like this?
[attachment=18011]
[attachment=18012]
Also still no rev counter despite much metering, soldering and bodging! I'm going to need a replacement loom at some point I think, will probably be easier in the long run.
End of play today
[attachment=18017]
Videos are a bit crap due to failing light but hey
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - Piggy - 29-07-2014
Nice work.
PAS cooler pipe is a regular thing to corrode. Wont hurt without it. Alternstively get some copper pipe and make a new one for cheap
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - Danny Wideboy - 31-07-2014
If it is an Autoguage guage then wire all of the coloured wires together to get to choose the colour you want.
I know the wiring diagrams are confusing but googling it was what I did in the end and got it working right.
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - darrenjlobb - 31-07-2014
Good to see this still going, I miss my XUD soooo bad!!
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - bashbarnard - 31-07-2014
The pas thing shouldnt matter. Some even came without them. My last hatch didnt have one this current one does.
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - Danny Wideboy - 01-08-2014
(31-07-2014, 05:30 PM)darrenjlobb Wrote: Good to see this still going, I miss my XUD soooo bad!!
You know what do about it........
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - silverzx - 01-08-2014
(31-07-2014, 05:30 PM)darrenjlobb Wrote: Good to see this still going, I miss my XUD soooo bad!!
Rumour has it..
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - londondan86 - 03-08-2014
(01-08-2014, 06:13 PM)silverzx Wrote:(31-07-2014, 05:30 PM)darrenjlobb Wrote: Good to see this still going, I miss my XUD soooo bad!!
Rumour has it..
Do you mean "some say"
Yep car going strong, no major issues at all. I'll try the trick with the egg gauge.
I've also got a screen mount for my phone so I'll get some driving videos soon.
RE: Londondan's Black Supercharged XUD Bloody Gauges :D - londondan86 - 27-10-2014
That is all
RE: Londondan's Black Supercharged XUD It Lives!!! :D - Frosty - 27-10-2014
Video is private
RE: Londondan's Black Supercharged XUD It Lives!!! :D - londondan86 - 27-10-2014
Dunno why it did that??? Sorted anyway!
Most important thing is I have a rev counter!!! Lol
Got to have a look at the legality of using my trade plates to take it for a test run now.
My next task for this week. Get this block striped down and off to the machine shop with the head and valves
[attachment=19797]
My new linkage that got knocked up to stop it fowling on the manifold
[attachment=19798]
The burnt loom
[attachment=19799]
Also needing some shells and piston rings. Any recommendations on where to go/prices etc. The shells are for hdi style sputter rods btw
RE: Londondan's Black Supercharged XUD It Lives!!! :D - Piggy - 27-10-2014
Sounds amazing...
Although you will NEVER know if a pulley is squealing or dying!
RE: Londondan's Black Supercharged XUD It Lives!!! :D - silverzx - 27-10-2014
Good job.
RE: Londondan's Black Supercharged XUD It Lives!!! :D - londondan86 - 27-10-2014
(27-10-2014, 02:10 PM)Piggy Wrote: Sounds amazing...
Although you will NEVER know if a pulley is squealing or dying!
Haha I know mate!!! Most of the pulleys and tensioners have all covered less than 500 miles so should be good for a while yet!!
(27-10-2014, 02:13 PM)silverzx Wrote: Good job.
Cheers pal
Check back later, out driving video currently being uploaded, all 1.3 gb of it which is taking ages!!!!
RE: Londondan's Black Supercharged XUD It Lives!!! :D - silverzx - 27-10-2014
(27-10-2014, 03:36 PM)londondan86 Wrote:(27-10-2014, 02:10 PM)Piggy Wrote: Sounds amazing...
Although you will NEVER know if a pulley is squealing or dying!
Haha I know mate!!! Most of the pulleys and tensioners have all covered less than 500 miles so should be good for a while yet!!
(27-10-2014, 02:13 PM)silverzx Wrote: Good job.
Cheers pal
Check back later, out driving video currently being uploaded, all 1.3 gb of it which is taking ages!!!!
1.3 GB?
I hope you have fibre.
RE: Londondan's Black Supercharged XUD It Lives!!! :D - darrenjlobb - 27-10-2014
Looking good chap, I miss this!
Sounds like you have something out of line somewhere or something the way the belt is sqeeking, any idea whats the cause? I cant stand a sqeaky belt!!
RE: Londondan's Black Supercharged XUD It Lives!!! :D - Mattcheese31 - 27-10-2014
nice one . . . . . get it out for a spin . . .
RE: Londondan's Black Supercharged XUD It Lives!!! :D - 7057sam - 27-10-2014
Sounds and looks great.can't believe I've never seen this thread.
RE: Londondan's Black Supercharged XUD It Lives!!! :D - zx_volcane - 27-10-2014
the sound of that charger on an xud, just epic!
RE: Londondan's Black Supercharged XUD It Lives!!! :D - londondan86 - 27-10-2014
Well here she is out for a blast! Now I can actually tell where the boost is coming in at given rpm!!!
Turbo doesn't hit full chat til ~3.5k which to be fair - I love!! There is pull from minute one from the charger then bammmm kick up the ass and boooooost!! Manifold pressure is pinning the 30 psi gauge before the turbo is fully on song which itself is peaking around 22 psi. I therefore estimate peak manifold pressure to be at approx 40 psi at the moment.
Pump is lagging a bit so may need to look at that for the next build and possibly a conversation with you Mr Lobb of where to go next with it. Having said that it is supercharged 100% veg win at the mo!! lol
I'll reply to the comments in a min, just want to sort the video out first
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - Grant - 27-10-2014
When that thing comes on song, it sounds fapping epic!
Don't fancy your dash vibrations however!
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - londondan86 - 27-10-2014
(27-10-2014, 06:19 PM)darrenjlobb Wrote: Looking good chap, I miss this!
Sounds like you have something out of line somewhere or something the way the belt is sqeeking, any idea whats the cause? I cant stand a sqeaky belt!!
Cheers mate!! Yea, the belt is a nightmare!! I will be sacking off the power steering pump on the next build and going for a saxo jobbie. There just isnt enough contact on the pump at the mo. It does quieten down though once its warmed up
(27-10-2014, 06:21 PM)Mattcheese31 Wrote: nice one . . . . . get it out for a spin . . .See above!!! lol
(27-10-2014, 08:35 PM)7057sam Wrote: Sounds and looks great.can't believe I've never seen this thread.Cheers pal. To be fair it has been quiet on and off due to a lack of activity
(27-10-2014, 08:47 PM)zx_volcane Wrote: the sound of that charger on an xud, just epic!
Mate, the videos dont do it justice!!!!
(27-10-2014, 09:02 PM)Grant Wrote: When that thing comes on song, it sounds fapping epic!
Don't fancy your dash vibrations however!
Yea, there are a lot of vibrations! lol The back is full of tools which didnt help either! lol
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - Mattcheese31 - 27-10-2014
Haha screamin' demon, sounds evil mate, love it
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - Piggy - 27-10-2014
That looks mental!! Love it!
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - londondan86 - 27-10-2014
Cheers gents!!! Got some inspiration back on it now!
I'll be stripping the next block over the next few days so I'll keep this a bit more updated now.
I may also try and get it on the rollers this week and see what she's making
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - Niall - 27-10-2014
Sounds awesome man! Nice to have another Eaton friend as well :p
40psi, i bet thats got to be making a fair bit of power!
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - londondan86 - 27-10-2014
Lol Eaton fwend!! Not sure on the pulley ratios but I think it's around 3:1 so that charger is doing at least 15krpm!! It is epic!!!
Don't want to guess to much at power but I'd be disappointed at anything less than 200bhp!
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - Niall - 27-10-2014
any more than about 7psi out of them chargers and your getting to the point where you are creating so much heat that its counteracting the extra boost.
RE: Londondan's Black Supercharged XUD New Video Inside!! :D - silverzx - 28-10-2014
I thought it would be louder on full blow!?