+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Londondan's Black Supercharged XUD New Video Inside!! :D (/showthread.php?tid=6065)
RE: Londondan's Black Supercharged XUD Engine 2 first start :D - zx_volcane - 11-01-2014
TD05 iirc ?
Londondan's Black Supercharged XUD Engine 2 first start :D - Frosty - 12-01-2014
Any updates on this?
RE: Londondan's Black Supercharged XUD Engine 2 first start :D - londondan86 - 20-04-2014
Updates should start to flow again on this again soon. Car is now at home running, brembos are on but the bloody master cylinder has decided to let go!!
I'm hoping it will be at fcs this year along with another little french project I have going too
RE: Londondan's Black Supercharged XUD Engine 2 first start :D - toseland - 17-05-2014
jesus, i am looking at this and all of my thoughts about sticking a bigger turbo on my XUD in the vitara, went right out the window.. i now want an eaton on mine.. that sound.....
RE: Londondan's Black Supercharged XUD Engine 2 first start :D - londondan86 - 17-06-2014
About time I updated this!!! The car is now back on the road and has been for a few weeks now.
Had a bloody nightmare with fitting the brembo's (read fail) but they are now on and working well, squeal a little as I pull up to a set of lights but I can live with that for now.
Had about a week of blowing boost hoses off but now seems to hold fine, even when pinning the 30psi gauge (post charger)
Engine does seem to get hot after any prolonged boost but soon drops off again so all good! And it holds water without using it!
This car seriously shifts, whisp of coal and its gone!!Bloody rev counter still doesnt work which is pissing me right off, must be a break in the loom somewhere as I've had 2 different engines and 2 different sets of clocks. I'm hoping its on the engine loom which will make an easy(ish) swap. How do these work on the 306, is there a constant voltage that drops to 0v when it picks up from the fly???
Bodywork is desperately in need of attention, the bonnet has peeled paint everywhere, there are dents in both doors, etc. I think I may end up respraying her over the winter - or reshell if I can find a decent black P3....
The fuel system is drawing air in over night too which is a bit of a PITA but should be easily sorted, I will probably sack off the stock filter for inline like before. Anyone used this type: http://www.ebay.co.uk/itm/UNIVERSAL-10MM-3-8-CHROME-GLASS-INLINE-FUEL-FILTER-PETROL-DIESEL-/360764775081?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item53ff419aa9
I will try and get some videos on the go soon as well, new phone has meant that my dash mount no longer fits
[attachment=16871]
[attachment=16872]
[attachment=16873]
RE: Londondan's Black Supercharged XUD Back on the road :D - ozonehostile - 17-06-2014
Nice to hear it's running reasonably well again dude, how close are the brembos to the wheels at the moment? Looks insanely close in the picture haha
RE: Londondan's Black Supercharged XUD Back on the road :D - ginge191 - 17-06-2014
That fuel filter is a little small bud.
I tend to stick to the Audi TT inline filter. Much larger , never had problems with then
Car looking real smart though! Good work!
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 17-06-2014
There is about 2mm clearence with the brakes on the wheels and thats running about 18mm in spacers!!! lol
Yea, had a TT one on last time, just didnt look that good in the engine bay. Hmmm..
RE: Londondan's Black Supercharged XUD Back on the road :D - Frosty - 17-06-2014
Glad to see this is all back together and running
RE: Londondan's Black Supercharged XUD Back on the road :D - Danny Wideboy - 18-06-2014
Can we have some engine bay pics pwease.
Pleased for you this is back running again.
RE: Londondan's Black Supercharged XUD Back on the road :D - Piggy - 18-06-2014
That ebay filter is crap. Small and not neally decent enough micron.
Go for a nice truck filter setup. Can get 10mm banjos and a decent flow and look good
Great to hear its all running again
Which rev counter pickup are you using?
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 18-06-2014
(18-06-2014, 06:17 PM)Danny Wideboy Wrote: Can we have some engine bay pics pwease.
Pleased for you this is back running again.
I'll post some up tomorrow, on a crap 3g(ish) connection at the moment
(18-06-2014, 06:22 PM)Piggy Wrote: That ebay filter is crap. Small and not neally decent enough micron.
Go for a nice truck filter setup. Can get 10mm banjos and a decent flow and look good
Great to hear its all running again
Which rev counter pickup are you using?
Cheers buddy! I'll leave that filter then, what you using at the moment? Any links?
Rev counter is all stock xud, pickup on the fly, etc. Going to try another loom when I get the chance.
RE: Londondan's Black Supercharged XUD Back on the road :D - Piggy - 18-06-2014
ah right.
I tried a HDi pickup at top and it didnt wana know. Had to use XUD one at the rear.
Just found a truck filter housing on ebay....think a second one I got for spares was from a truck at scrapyard. then ordered 10mm banjo fittings
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 18-06-2014
Yea HDi has different pick-up positions iirc and also there is an ecu to translate a signal. May search the bay then for a truck filter, just would like it to look half decent too!!
Hmm, may strip down the standard system and rebuild it to clear the air leaks.
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 19-06-2014
Engine bay pic as promised! Needs more shiney things! lol!
[attachment=16979]
Current gauge layout. I will be getting a dual pillar pod for the 2 boost gauges and having oil temp, oil pressure and egt in the middle. Money just a bit tight at the mo
Stereo has been sacked off entirely now as it can't be heard anyway! lol
[attachment=16980]
Also noticed today that she has developed a bit of an oil leak, seems to be coming from the sandwhich plate. I'll have a look at the weekend.
RE: Londondan's Black Supercharged XUD Back on the road :D - Frosty - 19-06-2014
This going to be at pugfest? I had an oil leak develop on my old engine that was coming from the sandwich plate. It was like the O rings on the plate had gone flat. It only started once the car was parked up and moved every now and again. I fitted a new 1 to my current engine but I expect it would of been fine with some sealant
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 19-06-2014
Unlikely to be at pugfest mate, just moved house so bloody skint
I'll be at forge though in August (assuming the club is going)Exactly that with the sandwich plate, not lost much as its not moved on the dipstick but whenever it is parked up I end up with a couple of drips worth!! I may see if i can get another 1/4 turn on it now its all settled a bit!
RE: Londondan's Black Supercharged XUD Back on the road :D - Niall - 19-06-2014
What have you got on the sandwich plate? Sensors or an oil cooler?
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 19-06-2014
(19-06-2014, 10:11 PM)Niall Wrote: What have you got on the sandwich plate? Sensors or an oil cooler?
Just sensors for now mate. I will be looking for a thermostatic plate for a cooler but not yet.
Londondan's Black Supercharged XUD Back on the road :D - Frosty - 20-06-2014
(19-06-2014, 10:05 PM)londondan86 Wrote: Unlikely to be at pugfest mate, just moved house so bloody skint
Exactly that with the sandwich plate, not lost much as its not moved on the dipstick but whenever it is parked up I end up with a couple of drips worth!! I may see if i can get another 1/4 turn on it now its all settled a bit!
Ah cool. I would prob pop the sandwich plate off and have a look at the O rings
Londondan's Black Supercharged XUD Back on the road :D - devils_fuel - 20-06-2014
So glad fella this is now running
. I bet this has out a smile on your face 
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 20-06-2014
(20-06-2014, 06:27 AM)Frosty Wrote:Yea going to see how well it seals after a nip up, if it's still leaking I'll be taking it off and resetting it.(19-06-2014, 10:05 PM)londondan86 Wrote: Unlikely to be at pugfest mate, just moved house so bloody skint
Exactly that with the sandwich plate, not lost much as its not moved on the dipstick but whenever it is parked up I end up with a couple of drips worth!! I may see if i can get another 1/4 turn on it now its all settled a bit!
Ah cool. I would prob pop the sandwich plate off and have a look at the O rings
(20-06-2014, 07:45 PM)devils_fuel Wrote: So glad fella this is now runningOh yes!
Londondan's Black Supercharged XUD Back on the road :D - devils_fuel - 20-06-2014
Sure it does
RE: Londondan's Black Supercharged XUD Back on the road :D - cjm_harris - 24-06-2014
Great work mate, just had a quick skim through the last few pages.
Sorry if its been mentioned already, but what sort of power/torque figures are you expecting from a setup like this? Be very interested to see a dyno graph if/when you get one
Also saw something about oil leak from the sandwich plate area. Feel your pain there, has similar issues myself at the minute! argh!
RE: Londondan's Black Supercharged XUD Back on the road :D - PartyJas - 01-07-2014
I came across this beast on my way to work in Wrexham last week. I copped the FMIC then heard that unmistakable supercharger whine. Nice work londondan86.
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 01-07-2014
(01-07-2014, 12:17 PM)PartyJas Wrote: I came across this beast on my way to work in Wrexham last week. I copped the FMIC then heard that unmistakable supercharger whine. Nice work londondan86.
Cheers bud!! Whereabouts? Next time give me a beep and thumbs up
RE: Londondan's Black Supercharged XUD Back on the road :D - PartyJas - 02-07-2014
(01-07-2014, 05:54 PM)londondan86 Wrote:(01-07-2014, 12:17 PM)PartyJas Wrote: I came across this beast on my way to work in Wrexham last week. I copped the FMIC then heard that unmistakable supercharger whine. Nice work londondan86.
Cheers bud!! Whereabouts? Next time give me a beep and thumbs up
You were behind be coming onto the Gresford roundabout and followed me down the Borras bypass and all the way into the industrial estate. I was in a Red Phase 1. It was your sticker in the window that got me signed up to this forum. I wanted to know what the hell you had under the bonnet
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 02-07-2014
(02-07-2014, 09:35 AM)PartyJas Wrote:(01-07-2014, 05:54 PM)londondan86 Wrote:(01-07-2014, 12:17 PM)PartyJas Wrote: I came across this beast on my way to work in Wrexham last week. I copped the FMIC then heard that unmistakable supercharger whine. Nice work londondan86.
Cheers bud!! Whereabouts? Next time give me a beep and thumbs up
You were behind be coming onto the Gresford roundabout and followed me down the Borras bypass and all the way into the industrial estate. I was in a Red Phase 1. It was your sticker in the window that got me signed up to this forum. I wanted to know what the hell you had under the bonnet
Ahhh!! Yep I remember, nice little cherry p1. I got wedged in and you disappeared
Glad the sticker had the desired effect! Welcome to the club pal! Get a project thread up yourself, a lot of the lads on here go mad for a nice p1
RE: Londondan's Black Supercharged XUD Back on the road :D - PartyJas - 02-07-2014
Yeah i was late for work and had a bit of a rush on. You getting wedged in is the only way I could ever leave you behind lol. My car is totally standard at the mo. Got a Bosch on the way though then I begin my journey into the world of diesel tuning. Would you be up for meeting up at some point so I can have a drool over your twincharged beastie.?
RE: Londondan's Black Supercharged XUD Back on the road :D - londondan86 - 02-07-2014
Haha!! Once you get into the derv tuning game you will be in it for good!!
Happy to meet up at some point pal.