306oc - Peugeot 306 Owners Club & Forum
Daves Compound Twin turbo XUD - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Daves Compound Twin turbo XUD (/showthread.php?tid=261)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12

RE: Daves DERV project + pics - zx_volcane - 19-09-2012

Damn I need to sort my pump out and get it on, 4k is so yesterday :/

RE: Daves DERV project + pics - ash23 - 19-09-2012

This thing is flipping quick Smile what's its hp in its current state then Big Grin

RE: Daves DERV project + pics - Dave - 20-09-2012

http://www.youtube.com/watch?v=9dAmyQfYoVA&feature=g-upl

[Image: IMAG0629_zpsfaf1016f.jpg]

Obviously needs more fuel as once its on puff its clean as a whistle but it was left how I drive it daily for a baseline. Well impressed with how the torque just monster climbs after 1,400 rpm.

168 hp / 242ftlb
24psi peak

Definitely needs head flow work, winding up the boost would make more power, but it just heats everything to shit and boils over, it shouldnt be needed from that blower, happy with that result, gti6 power but a shit ton more torque. Will get it dyno'd again after heads been off and played with.

Dont really know what the fucks going on just after 5k, I think its the govnor spring breaking free and then bouncing back again, probably shim it up abit more.

On a side note my mate radiationbeta was there too.. he ran 124hp/197ftlb which I thought was very impressive for a reamed T2/9mm on top mount.

RE: Daves DERV project + pics - Mattcheese31 - 20-09-2012

nice result for yours Dave, dunno about radiationbeta's, it's ok like but i've made 133.7bhp on a K14 on top mount . .Smile

RE: Daves DERV project + pics - Dave - 20-09-2012

Cheers Matt, I thought 124 was pretty good lol, I guess it must vary from dyno to dyno. Its 9mm with 1.6 bar.

RE: Daves DERV project + pics - zx_volcane - 20-09-2012

Looking good, where was this done? I fancy getting the zx on the rollers...

RE: Daves DERV project + pics - CJ_Derv - 20-09-2012

Louis123 made 127 on a lucas and K14 at pod this year when i tweaked it up a tad but cracking results there dave impressed with that torque Smile im considering some head work on me spare youll have to put some piccies of what you do to it i did one on the blaze and noticed a diff but never got chance to dyno as got wrote off Sad

When you hitting full boost in the rev range?

CJ

RE: Daves DERV project + pics - Curt - 20-09-2012

Nice result there Dave, loving the time lapse video Smile

RE: Daves DERV project + pics - Dave - 20-09-2012

(20-09-2012, 11:41 AM)zx_volcane Wrote: Looking good, where was this done? I fancy getting the zx on the rollers...

Was at dynodaze in Hinckley, £30 for 2 runs, just turn up wednesday night.

(20-09-2012, 11:53 AM)CJ_Derv Wrote: Louis123 made 127 on a lucas and K14 at pod this year when i tweaked it up a tad but cracking results there dave impressed with that torque Smile im considering some head work on me spare youll have to put some piccies of what you do to it i did one on the blaze and noticed a diff but never got chance to dyno as got wrote off Sad

When you hitting full boost in the rev range?

Cheers mate the peak isnt that great but the escalation of it I was quite impressed with. I will try put some pics up, I honed out the exhaust and intake ports what did you do to your blaze? Boost is full by about 2400, would be full wack at about 2.1k but the MBC is abit dickish and seeps a little, this does help surging low down though so i'm gonna leave it.

CJ

(20-09-2012, 12:01 PM)Curt Wrote: Nice result there Dave, loving the time lapse video Smile

Cheers bud, hopefully be doing some more work/timelapsing soon as its only a stock engine, needs some better components Big Grin another reason why im afraid to push the fuelling too much... stock rods are holding out but my parents have been very forgiving recently with the current garage state, dont want to have to pull another block! Sad

RE: Daves DERV project + pics - Matty - 20-09-2012

Woah, ain't been here in a while.

Any who, I love coal <3 Got covered in it...


RE: Daves DERV project + pics - Mattcheese31 - 20-09-2012

(20-09-2012, 11:06 AM)Dave Wrote: Cheers Matt, I thought 124 was pretty good lol, I guess it must vary from dyno to dyno. Its 9mm with 1.6 bar.

yeah probs, it's a proper place we use round my end that maps cars, not a fairground ride style one lol . . . . . what's 1.6 bar? about 18psi or summit? mine's at 24psi . .i would like a bit more torque though, maybe time to lose the middle box . .Smile

RE: Daves DERV project + pics - Dave - 20-09-2012

Cheers Matty for the vid you ledge, sound does not do it justice (even though I think it sounded 100000x better with the T28 anyway!)

Mr cheese 1.6 bar is like 23psi I think, bout what mine was running.

RE: Daves DERV project + pics - Matty - 20-09-2012

Agreed, sound doesn't do it justice what so ever. T28 was awesome, but this by far, is so much better when you took me for a spin in it. T28 was so laggy, where from memory, this starts spooling well before 2k and peaked just under 2.4k at 25psi. Loved it. Smile

RE: Daves DERV project + pics - Mattcheese31 - 21-09-2012

(20-09-2012, 06:17 PM)Dave Wrote: Cheers Matty for the vid you ledge, sound does not do it justice (even though I think it sounded 100000x better with the T28 anyway!)

Mr cheese 1.6 bar is like 23psi I think, bout what mine was running.

ahh ok, my head only works in psi lol . . . . .well just goes to show as i've suspected for a while that the K14 is the superior snail, only failing is it's shitty wastegate . . . . .your car goes real well though mate anyway, right animal . .Smile

RE: Daves DERV project + pics - kernow_joe - 21-09-2012

so what turbo are you running now then dave? not a man sized one any more?

nice result on the dyno whatever you're running!

RE: Daves DERV project + pics - CJ_Derv - 21-09-2012

I think i need to fiddle with the LDA maybe get fuel coming in bit lower boost to get turbo going bit quiker maybe, i really need to look into puimp tuning in more detail lol ive just done a quick play with it and seems rapid but i no theres much more potential

RE: Daves DERV project + pics - zx_volcane - 21-09-2012

(20-09-2012, 02:32 PM)Dave Wrote: Was at dynodaze in Hinckley, £30 for 2 runs, just turn up wednesday night.

sounds good, prob give this a go in the next week or so

RE: Daves DERV project + pics - Matty - 21-09-2012

(21-09-2012, 01:10 PM)zx_volcane Wrote:
(20-09-2012, 02:32 PM)Dave Wrote: Was at dynodaze in Hinckley, £30 for 2 runs, just turn up wednesday night.

sounds good, prob give this a go in the next week or so

Let me know if you head down, I'll turn up and spectate! Tongue

RE: Daves DERV project + pics - Dave - 03-02-2013

Bout time I manned up and started pulling the block on the black chariot...

back in the kennel where it belongs Wink

[Image: IMAG1498_zpsad841b16.jpg]

Not much of an update, but will try and get destructo pics up when I pull block/have a look inside at messy goodness.

dave

RE: Daves DERV project + pics - Jtrigga - 04-02-2013

Seen more pictures of it in your garage than on the road lol

RE: Daves DERV project + pics - darrenjlobb - 04-02-2013

(04-02-2013, 08:22 PM)Jtrigga Wrote: Seen more pictures of it in your garage than on the road lol

Thats the way it should be! The road is just for learning and diagnostics Tongue

RE: Daves DERV project + pics - Jtrigga - 05-02-2013

(04-02-2013, 08:24 PM)darrenjlobb Wrote: Thats the way it should be! The road is just for learning and diagnostics Tongue

Haha your the one that should know that best.

RE: Daves DERV project + pics - darrenjlobb - 05-02-2013

I also love the tractor battery to one side, just waiting for abuse on leads wen engine goes back in lol standard derv head situation

RE: Daves DERV project + pics - Dave - 13-02-2013

Just an update, drank some monster energy, manned up and stripped down the block to be sent off for some destructive testing! Big Grin

[Image: IMAG1533_zpsf493d270.jpg]

[Image: IMAG1547_zps3323d032.jpg]

[Image: IMAG1548_zps35c3794b.jpg]

[Image: IMAG1549_zps05072747.jpg]

[Image: IMAG1551_zpsdcda7a2f.jpg]

[Image: IMAG1554_zpsf346cc73.jpg]

[Image: IMAG1556_zps1a6c4afe.jpg]

[Image: IMAG1558_zpse118f46a.jpg]

[Image: IMAG1566_zps44ad5275.jpg]

[Image: IMAG1567_zpsa1089843.jpg]

[Image: IMAG1569_zps364216e2.jpg]

Suprisingly light when everything is out of them!

Daves DERV- Blown XUD.jpg - Sambarker - 14-02-2013

Which rods were these? #pleasesaystock

RE: Daves DERV- Blown XUD.jpg - zx_volcane - 14-02-2013

Did you drink the bottle of crisp n dry too?

As cool as destruction photos are, hope you never have to see another hole in a block again.

RE: Daves DERV- Blown XUD.jpg - Dave - 14-02-2013

Sam was a stock dhy motor, so enevitable with 35lb of boost ... The crisp and dry bottles I used to hold onto bolts really. Hopefully won't blow another block as you say, should be the last time I'm pissing about picking shards of metal off the floor.

RE: Daves DERV- Blown XUD.jpg - strictly_perv - 14-02-2013

So what have you got planned for the next build? Forged rods and updated bolts?

RE: Daves DERV- Blown XUD.jpg - Dave - 14-02-2013

Well I thought about just getting another stock block, fitting some hdi rods, and running it as a reliable 170hp daily, as I have the same 2052V turbo ruan had before - and have uprated headstuds too so there wouldnt be an issue with reliability then... but don't think I could take a step down on power now.

RE: Daves DERV- Blown XUD.jpg - mr_fish - 14-02-2013

impressive destruction there! Big Grin