306oc - Peugeot 306 Owners Club & Forum
Ph1 Diablo D-turbo - Being Broken Up! - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Ph1 Diablo D-turbo - Being Broken Up! (/showthread.php?tid=817)

Pages: 1 2 3 4 5 6 7 8 9 10 11


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 24-03-2012

maybe its setup fine atm then? could alwasy dyno it and see if it makes more power upping fuel


Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bosched - padge - 24-03-2012

Im going to up the fuel, get it boosting around 30psi.


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 25-03-2012

Right another update for those of you who look in here met padge today while i was on a job and got 2 12" slimline fans and an mbc. fitted the fans already just need to wire them up to the exsisting loom so they work as norm

[Image: SAM_0237.jpg]

[Image: SAM_0239.jpg]


Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bosched - Matt - 25-03-2012

Looks good mate Smile


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - ginge191 - 25-03-2012

i like the look of the washer jets on the intercooler - what is this wired/piped into??

any more info on this??


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 25-03-2012

the sprayer is simply conneected to the rear washer jet as i havent got my rear wiper in and 95% of 306s its blocked and so its operated by the rear washer jet control on the steering colum stalk. on the 207 it was operated by full throttle i may do something simular on this or figure a way of it automatically triggering at a certain temp if i was to go down this route id want a seperate water tank like i had on the 207. Having to twist the stalk and control the car isnt ideal as i keep operating wipers to haha so havent used it to its full potential


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 25-03-2012

Also forgot to up load these pics these are current as of this morning any one notice any thing different other than lack of grill???

[Image: SAM_0001.jpg]
[Image: SAM_0010-1.jpg]

Ps grill is missing to aid cooling as im running a NAD Radiator atm and dont want to pop the engine!


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Mattcheese31 - 26-03-2012

yes . . . .someone's nicked your rubstrips . . . .:p


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - declantg - 26-03-2012

looking really nice mate! might have to use that idea on my TMIC :think:


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 26-03-2012

Mattcheese31 Wrote:yes . . . .someone's nicked your rubstrips . . . .:p

They have indeed! first my clothes airer and now my rubstrips these bleedin northerners eh!

On a serious note taken them off to splash some colour on them


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 26-03-2012

So finished the slim lines off all wired up using the origianl loom did have a problem to start with but turned out it was a couple of fuses

[Image: SAM_0241.jpg]

Fans and sneak peak of cooler

[Image: SAM_0243.jpg]
[Image: SAM_0245.jpg]

Yes its small get over it :-p


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Rippthrough - 26-03-2012

Do you need me to return the favour and fetch you a grill? lol

Running buggy in all week, until it goes off for setting up on thursday if you get chance to call around, give me a bell first, can have a run in it around field.


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 26-03-2012

Rippthrough Wrote:Do you need me to return the favour and fetch you a grill? lol

Running buggy in all week, until it goes off for setting up on thursday if you get chance to call around, give me a bell first, can have a run in it around field.

Unlike you i didnt lose mine lol its off atm for cooling the crap rad iv got haha. il pop through after plumber has been tomorow il give you bell despite you ignoring me the other day lmao lol


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Rippthrough - 26-03-2012

Yesterday? Didn't get anything through, was in workshop though so phone reception is shocking.


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 26-03-2012

thats thurcroft for ya! if i cant get hold il bomb it past lane showing you my dump valve haha so youve got a pre warning of the mobile chippy


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Rippthrough - 26-03-2012

Probably be up there pretty much all afternoon on Weds.


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 01-04-2012

Minor Update finally got a new radiator paid £30 for a virtually brand new nissens rad that id previously been quoted £100 for! was from a phase 2 so removed all the pipe work to convert the phase 1 to phase 2

[Image: SAM_0264-1.jpg]
[Image: SAM_0267-2.jpg]

Then got the slim lines on again
[Image: SAM_0268.jpg]

And a sign of things to come
[Image: SAM_0299.jpg]


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Rippthrough - 01-04-2012

He also got a ride in a car on proper fuel, and had to put up with me making a right hash of things :p


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 02-04-2012

Rippthrough Wrote:He also got a ride in a car on proper fuel, and had to put up with me making a right hash of things :p

Least youve admitted that! yes phillip got a bit tail happy trying to impress with a decent jump and nearly threw the back end of the buggy into a hedge!


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Rippthrough - 02-04-2012

Don't learn anything about the suspension without some abuse! Besides, the was at least 6 inches spare....aand a good foot to the ditch...


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 04-04-2012

Sneak peak of where things are at at the moment

[Image: SAM_0720.jpg]


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 09-04-2012

some more finished bits
[Image: bf25b291.jpg]
[Image: 1340a4f0.jpg]
and on the car can hardly tell really except when its in the sun you can. nice and glossy though
[Image: 22a3056b.jpg]


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - samass - 10-04-2012

christ thats a really good finish!


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 13-04-2012

Nothing much of an update got a number plate surround. had seen these on a gti6 project thread and wanted one for my self some one of another forum was selling one dirt cheap so bought it! going to buy a 2nd eventually along with pressed plates!

[Image: 31365f84.jpg]

rub strips are still being done one side is nearly done used allot of paint so far but im pretty pleased with the results im getting


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 13-04-2012

samass Wrote:christ thats a really good finish!
This is a much better finish Smile

[Image: d68d7dd8.jpg]


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Niall - 13-04-2012

Gloss black is where it's at. That's what I'm doing with mine! Nice looking car mate.


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 13-04-2012

Niall Wrote:Gloss black is where it's at. That's what I'm doing with mine! Nice looking car mate.

This isnt gloss black its ford graphite gray like anthracite really the finish is what makes it so glossy and reflective got to love the products i detail with. and thanks for the kind comments Smile


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Niall - 13-04-2012

What cutting compound did you use on that?


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - Jenkosowls - 13-04-2012

Niall Wrote:What cutting compound did you use on that?

Menz power finish with low roatary speed peaking upto 1600 rpm. 1200 wet and dry sanded prior to compounding


Re: Ph1 Diablo D-turbo - 120bhp 219lbs/ft on a lucas Now Bos - samass - 14-04-2012

shiiiiiney! can really see the hard work gone into getting the finsih man , top work!