+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Rockers '6 Is back (/showthread.php?tid=4282)
RE: Rockers '6 - Poodle - 22-09-2012
Says the guy living in weston..? :facepalm:
RE: Rockers '6 - Midnightclub - 22-09-2012
Is there statistically more puddles in weston or something i don't know about? unless you mean the sea.. but that's hardly a puddle
RE: Rockers '6 - rocker8742 - 24-09-2012
Lol driving in the sea again danny?
tbh im not too keen on it there but just try to avoid anything too deep
RE: Rockers '6 - rocker8742 - 16-10-2012
Right now my list of things to do is growing
New rad and thermostat
New rear beam
New pads + discs
New wheels + tyres
Fancying a new exhaust again
Still need to get an inlet manifold and spray up the engine bay bits ive got
the powerflow exhaust i had which was silly loud:
RE: Rockers '6 - spike2002 - 16-10-2012
Sounds quite loud alot louder than it was on the 1.6
RE: Rockers '6 - rocker8742 - 16-10-2012
tbh that sounds quiet in the video lol
RE: Rockers '6 - spike2002 - 16-10-2012
It was loud but not to loud on the 1.6 i bet you woke ur neighbours up in the morning with it lol
RE: Rockers '6 - rocker8742 - 16-10-2012
had a few complaints lol loved setting off car alarms as i cruised past though
RE: Rockers '6 - rocker8742 - 30-10-2012
Some Progress
![[Image: 2012-10-25141555.jpg]](http://i1133.photobucket.com/albums/m598/rocker8742/2012-10-25141555.jpg)
Next bit to strip and spray
![[Image: 2012-10-30213538.jpg]](http://i1133.photobucket.com/albums/m598/rocker8742/2012-10-30213538.jpg)
![[Image: 2012-09-07192557-1-1-1.jpg]](http://i1133.photobucket.com/albums/m598/rocker8742/2012-09-07192557-1-1-1.jpg)
Re: Rockers '6 - rocker8742 - 05-11-2012
Stripped ready for paint
![[Image: 2012-11-04164321.jpg]](http://i1133.photobucket.com/albums/m598/rocker8742/2012-11-04164321.jpg)
RE: Rockers '6 - sam - 05-11-2012
looking good there dude
Re: Rockers '6 - rocker8742 - 05-11-2012
Cheers mate can't wait to get these bits finished and on
Re: Rockers '6 - kernow_joe - 05-11-2012
Nice mate, how'd you clean/strip it?
Re: Rockers '6 - Alee83 - 05-11-2012
What colour you doing them all??
RE: Rockers '6 - rocker8742 - 06-11-2012
Used some old contact cleaner mate that i found in the shed pretty potent stuff really and just wiped it off with a cloth
And it will be going White mate, if i keep the resonator that will probably be get painted sigma blue to break it up a bit
Re: Rockers '6 - Alee83 - 06-11-2012
Bung bung....
http://pages.ebay.com/link/?nav=item.view&id=221140288492
RE: Rockers '6 - kernow_joe - 07-11-2012
(06-11-2012, 07:44 PM)rocker8742 Wrote: Used some old contact cleaner mate that i found in the shed pretty potent stuff really and just wiped it off with a cloth
And it will be going White mate, if i keep the resonator that will probably be get painted sigma blue to break it up a bit
may have been a bit better to start with than mine then was then!
I'm thinking of glass black for mine although not sure if it will just look shit
Re: Rockers '6 - rocker8742 - 07-11-2012
It wasn't too bad really there's a pic a bit further back
Think the black should look good, im just using Matt paint then going to laquer over it
RE: Rockers '6 - rocker8742 - 08-11-2012
Cheersa for the link btw Alee
Few more bits on the way now lol need to stop spending
RE: Rockers '6 - spike2002 - 08-11-2012
R242 on .net does the deresonator bungs mate iirc £15 posted worth droping him a pm if you go down that route
RE: Rockers '6 - rocker8742 - 13-11-2012
Bung turned up today
Part way through spraying the manifold now too Also fixed the cutting out and hunting issue i was having by swapping the ICV
RE: Rockers '6 - spike2002 - 13-11-2012
Nice one mate glad the icv sorted it all out for you nice easy fix
you got that screen and beam fitted yet?
Re: Rockers '6 - rocker8742 - 13-11-2012
No mate not had the time lol
Re: Rockers '6 - rocker8742 - 16-11-2012
Gonna try and fit the beam tomorrow
Re: Rockers '6 - Alee83 - 16-11-2012
Yay... :clap:
RE: Rockers '6 - kernow_joe - 16-11-2012
slong as you got someone to help line the new one up is a simple job,
RE: Rockers '6 - spike2002 - 16-11-2012
Will be a easy enuff swap mate
Re: Rockers '6 - rocker8742 - 18-11-2012
Swap want alright bit of a learning curve but now im having problems with it :facepalm:
Re: Rockers '6 - rocker8742 - 18-11-2012
Also found one of the mounts on my old beam was completely shagged had loads of movement in it
RE: Rockers '6 - Matt - 18-11-2012
Looking good. Needs for manifold pictures! Want to see shiny!!!