+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Cheap phase 1 and trying to make the most of it (/showthread.php?tid=23458)
Re: RE: Cheap phase 1 and trying to make the most of it - bashbarnard - 29-08-2014
(28-08-2014, 10:41 PM)daniel909 Wrote: Also had Ida pin ground by mr lobb while he was on the phone to Ruan :/ grinder in one hand pin in the other. Talk about precision engineeringI get like that at work sometimes but.the grinder slipped yesterday on me and caught my hand
Im glad to see the progress on this. Looks good. Any diffrent turbo plans??
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 29-08-2014
Was lookin at getting a td04 but funds are now tight so the next thing on my list is a new clutch don't really now what to go for !!!!
I slipped with a grinder befor cutting pipe and holding it with my foot just put a nice slice in my shoe lol
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 08-09-2014
Finally got round to doing my clutch tonight as my car was pretty much in drivable
First clutch I have done on a DT what a twat lining up the release bearing with the clutch fork but other than that it wasn't as bad as I thought it was going to be.
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 14-09-2014
Few pics or doing the clutch [attachment=19022]
[attachment=19023]
[attachment=19024]
[attachment=19025]
RE: Cheap phase 1 and trying to make the most of it - maxlee - 14-09-2014
looks like a difrent car from the one you picked up
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 15-09-2014
After splitting my radiator the other day my car if finally back again thanks to James for the rad and frosty mark and Darren for sorting it out and delivering
PIC of the first break down when it split
[attachment=19060]
Gave her a wash and a clean while she was off the road
[attachment=19061]
RE: Cheap phase 1 and trying to make the most of it - Frosty - 15-09-2014
Its looking good mate. You really need to get a badge for the grill though! Some side skirts would finish it off nicely as well
RE: Cheap phase 1 and trying to make the most of it - Owen_G_ - 15-09-2014
Looking good. Some progress on this yoke. Keep her lit lad
RE: Cheap phase 1 and trying to make the most of it - Piggy - 15-09-2014
Smart when its all clean...does want a nice badge on her and ph1 gti skirts with the lower half black!
RE: Cheap phase 1 and trying to make the most of it - WiNgNuTz - 15-09-2014
Looks good this, not sure how i've missed it up till now though!?
Nice save tbh, good that you've got Darren so close to you to help out!
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-09-2014
(15-09-2014, 08:22 PM)Frosty Wrote: Its looking good mate. You really need to get a badge for the grill though! Some side skirts would finish it off nicely as well
was looking at getting a de badge grill what ur thoughts
yeah looking at getting some side skirts
(15-09-2014, 09:26 PM)Piggy Wrote: Smart when its all clean...does want a nice badge on her and ph1 gti skirts with the lower half black!does not look good very often then
as Cornish are shit
Cheap phase 1 and trying to make the most of it - Frosty - 16-09-2014
I would say get a badge. I think they look better with the badge rather than a de badged grill. I may have a badge if you are after 1?
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-09-2014
well if u got one then yeah ok mate pm me
RE: Cheap phase 1 and trying to make the most of it - mr_fish - 16-09-2014
(15-09-2014, 06:10 PM)daniel909 Wrote: After splitting my radiator the other day my car if finally back again thanks to James for the rad and frosty mark and Darren for sorting it out and delivering
Group effort to keep the DT on the road. Good to see its back working again.
RE: Cheap phase 1 and trying to make the most of it - mr_fish - 16-09-2014
(15-09-2014, 06:10 PM)daniel909 Wrote: After splitting my radiator the other day my car if finally back again thanks to James for the rad and frosty mark and Darren for sorting it out and delivering
Group effort to keep the DT on the road.
. Good to see its back working again.
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-09-2014
Well next job is to adjust my wastegate a bit more
What does everyone think the car will look like on 205 gti alloys and what colour will look best
RE: Cheap phase 1 and trying to make the most of it - Jimbo - 16-09-2014
Should look epic.on white speedlines, my mate had some on his cherry DT looked really good tbh.
Good work with the car mate ph1s are dying out slowly
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-09-2014
I was thinking white are they 15 or. 16 inch
I got some white cyclones good condishion if any one would like to swap them
RE: Cheap phase 1 and trying to make the most of it - willJspears - 16-09-2014
(16-09-2014, 07:30 PM)daniel909 Wrote: I was thinking white are they 15 or. 16 inch
I got some white cyclones good condishion if any one would like to swap them
Mate at work has got a set of speedlines Rhys. I'll ask him how much he wants for them if you want.
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 17-09-2014
I will swap for my white clones
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 29-09-2014
Well f*cking head gasket went to night now thinking do is sell it scrap it can't really be asked with it now what to do hmmm
Cheap phase 1 and trying to make the most of it - Frosty - 29-09-2014
Don't give up mate. Be a shame after all the hard work you put into it!
RE: Cheap phase 1 and trying to make the most of it - mr_fish - 30-09-2014
let me guess, changed to 3rd brought it on boost and *bing* coolant light on?
Sucks mate, though if its taxed and tested for a while yet, you ought to keep at it.
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 12-10-2014
Small update I have been busy re building my landy so haven't touch my car since the head gasket went.
To today I finally got round to taking the head off to find that the gasket was f*cked taking the head to college tomorrow for a skim
Is there any other parts I should replace while it all stripped
Got head bolts
Head gaskets the way
Exhaust and inlet gasket
Cam cover gasket
[attachment=19509]
[attachment=19510]
RE: Cheap phase 1 and trying to make the most of it - Piggy - 12-10-2014
New belt be a good idea. Water pump too if you can afford it!!
Oh and a bigger turbo
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 12-10-2014
Would like a bigger turbo but I am thinking of selling and putting my landy back on the road now that pretty much finished
Just stripped the head down can split my hand on the spring compressor [attachment=19528]
[attachment=19529]
[attachment=19530]
Head needs a bit more cleaning
Cheap phase 1 and trying to make the most of it - Frosty - 12-10-2014
Good progress mate. With all this work I think you should keep it. I would say get a head set so you got all the gasket and seals you need.
Depending how keen you want to be get the valves grounded in and valve clearances checked
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 12-10-2014
Was thinking about putting new valve seals in what are they like to change
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 13-10-2014
Setting up ready for a skim
[attachment=19592]
RE: Cheap phase 1 and trying to make the most of it - Frosty - 13-10-2014
(12-10-2014, 06:53 PM)daniel909 Wrote: Was thinking about putting new valve seals in what are they like to change
There pretty easy. Decent set of pliers to get them off then tap the new 1s on with a socket