306oc - Peugeot 306 Owners Club & Forum
Ozonehostiles Blurple gti6. - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Ozonehostiles Blurple gti6. (/showthread.php?tid=22207)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 01-05-2014

(01-05-2014, 01:38 PM)Tom Wrote: Shit the forums down, Zakk must be updating ALL of his project threads again Undecided

lmao

I don't have that many Itwasntme


RE: Ozonehostiles Oem+ gti6 - Matt-Rallye - 01-05-2014

(01-05-2014, 12:55 PM)ozonehostile Wrote:
(01-05-2014, 12:47 PM)RetroPug Wrote: The standard backbox weighs an absolute tonne!

Looking good, nice shineys! Big Grin

I think the one I took off probably weighs more than your average one anyway because of the amount of welding done on it haha.

Looking through old mot's, blowing exhaust had been an advisory for the last 3 years haha.

The entire exhaust and box was basically made out of patches and pigeon shit welding haha

(30-04-2014, 11:53 PM)7057sam Wrote: Yeah I love the magnex sound on a 106/rallye/saxo but magnex use a 2.5 bore on the 6 so get max power but max boom with less raspy hence why the 106's ones are so rasy because the bore is like 2 inch???

Yesh with mine It was lack low down torque but for what I use it for its certainly the best system..

I put it next to the 2" supersprint off my rallye and it makes it look like a peashooter in comparison haha

I'll just have to drive it enthusiastically everywhere to keep it sounding good then haha

Matt is decatting his rallye soon so I'll have a go in that (with matts kind permission :-P) to pass judgement on whether the cat stays or not.
Dum-Dum, if you read this, I think your rallye has the same exhaust as this? The ear bleedingly loud one?

Like you need too ask Tongue (break it you buy it)


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 01-05-2014

(01-05-2014, 03:18 PM)Matt-Rallye Wrote:
(01-05-2014, 12:55 PM)ozonehostile Wrote:
(01-05-2014, 12:47 PM)RetroPug Wrote: The standard backbox weighs an absolute tonne!

Looking good, nice shineys! Big Grin

I think the one I took off probably weighs more than your average one anyway because of the amount of welding done on it haha.

Looking through old mot's, blowing exhaust had been an advisory for the last 3 years haha.

The entire exhaust and box was basically made out of patches and pigeon shit welding haha

(30-04-2014, 11:53 PM)7057sam Wrote: Yeah I love the magnex sound on a 106/rallye/saxo but magnex use a 2.5 bore on the 6 so get max power but max boom with less raspy hence why the 106's ones are so rasy because the bore is like 2 inch???

Yesh with mine It was lack low down torque but for what I use it for its certainly the best system..

I put it next to the 2" supersprint off my rallye and it makes it look like a peashooter in comparison haha

I'll just have to drive it enthusiastically everywhere to keep it sounding good then haha

Matt is decatting his rallye soon so I'll have a go in that (with matts kind permission :-P) to pass judgement on whether the cat stays or not.
Dum-Dum, if you read this, I think your rallye has the same exhaust as this? The ear bleedingly loud one?

Like you need too ask Tongue (break it you buy it)

Lmao, standard policy for the Herefordshire crew


RE: Ozonehostiles Oem+ gti6 - Dum-Dum - 01-05-2014

(30-04-2014, 07:12 AM)Piggy Wrote: You're as bad as me for buying more parts before the other parts are fitted
And me, I've got at least a grands worth of parts knocking about waiting to be fitted between the 2 cars far less bike and board parts too.



(01-05-2014, 12:55 PM)ozonehostile Wrote:
(30-04-2014, 11:53 PM)7057sam Wrote: Yeah I love the magnex sound on a 106/rallye/saxo but magnex use a 2.5 bore on the 6 so get max power but max boom with less raspy hence why the 106's ones are so rasy because the bore is like 2 inch???

Yesh with mine It was lack low down torque but for what I use it for its certainly the best system..

Dum-Dum, if you read this, I think your rallye has the same exhaust as this? The ear bleedingly loud one?

Yeah, I know the back box is the same but I cant believe mine has a mid box as its that loud, my ears were ringing even with decent ear plugs and like ringing for hours afterwards too. Its alright anywhere but the motorway or stops being boomy past about 90 or below 50


Re: RE: Ozonehostiles Oem+ gti6 - kentiiboii - 01-05-2014

(01-05-2014, 08:07 PM)Dum-Dum Wrote:
(30-04-2014, 07:12 AM)Piggy Wrote: You're as bad as me for buying more parts before the other parts are fitted
And me, I've got at least a grands worth of parts knocking about waiting to be fitted between the 2 cars far less bike and board parts too.

I know that feeling, I got so much stuff waiting to be fitted


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 01-05-2014

[Image: 20140501_192318_RichtoneHDR_zpsupyy8vvd.jpg]

Looks right at home


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 02-05-2014

Blackmasks and new badges sorted too, should be looking good by fcs :-D


RE: Ozonehostiles Oem+ gti6 - Matt-Rallye - 02-05-2014

That exhaust is sitting pretty on there now!

Is all the suspension etc sorted now? Smile


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 02-05-2014

(02-05-2014, 02:12 PM)Matt-Rallye Wrote: That exhaust is sitting pretty on there now!

Is all the suspension etc sorted now? Smile

Just waiting for my new shocks and springs to arrive :-)


RE: Ozonehostiles Oem+ gti6 - Matt-Rallye - 02-05-2014

Cool beans Smile i received confirmation my decat was delivered today.. bring on the bwarps!! Big Grin


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 02-05-2014

My sister just text me my suspension stuff also has arrived :-D

Guess what I'm doing tomorrow haha


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 03-05-2014

Spur of the moment purchase [Image: 20140503_105035_zpstrmbow26.jpg]


Re: Ozonehostiles Oem+ gti6 - kentiiboii - 03-05-2014

What make are they?


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 03-05-2014

They're gmax dude.

I'm a big fan of their stuff

Productive day today :-)

Sold a load of stuff this morning then spent an afternoon fitting my new suspension

Gmax shocks and 60mm springs, new topmounts and bearings plus painted the spring cups to tidy the install up [Image: 20140503_191832_zpsgvtv9ysd.jpg]

All done and looking good, also changed the Wishbones, balljoints and Droplinks while I was there [Image: 20140503_193511_zpseeyaqhsn.jpg]


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 04-05-2014

Productive day, took all the suspension off again to cut some more off the bumpstops then reassembled cleaning as I went.

All the running gear is now brand new and I'm keen as anything to see now it goes :-D

[Image: 20140504_172012_RichtoneHDR_zpsfrd4yiui.jpg]
Then started to clean the engine bay I'll get my rallye aux setup fitted soon then attack it again with the steam cleaner
[Image: 20140504_175355_RichtoneHDR_zps4iwuxs41.jpg]


RE: Ozonehostiles Oem+ gti6 - ash23 - 04-05-2014

looking good mate will be like new now Smile bit it is about time the dt got this much love Wink


RE: Ozonehostiles Oem+ gti6 - Piggy - 04-05-2014

Looking good...
That manifold needs the autosol/piggy OCD treatment!!


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 04-05-2014

(04-05-2014, 06:47 PM)Piggy Wrote: Looking good...
That manifold needs the autosol/piggy OCD treatment!!

All the exposed engine parts are coming off to be powder coated/polished anyway, I've just scrubbed the last 15 years of dust and grease buildup off :-)

Just for the lols

Old vs new [Image: 20140504_140209_zpsinzbvxci.jpg]


Re: Ozonehostiles Oem+ gti6 - kentiiboii - 04-05-2014

What did you use to clean engine? Are you ok to jetwash these engines?


RE: Ozonehostiles Oem+ gti6 - 7057sam - 04-05-2014

Gmaxx you tight bastard lol

did my escort on gmaxx pretty shure it was the fact it was a escort which made it handle worst Dodgy

I be doing my manifold with autosol gave up after a few hours and decided to take it off andnspray it Smile


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 04-05-2014

(04-05-2014, 10:24 PM)kentiiboii Wrote: What did you use to clean engine? Are you ok to jetwash these engines?

Stuff called wurth 2040, like wd40 but waaaay better. Literally use it for everything haha
As for jetwashing, I cover the most sensitive parts like battery, ecu and whatever else you don't want water getting in with plastic and tape then focus your attention on the block and head

(04-05-2014, 11:26 PM)7057sam Wrote: Gmaxx you tight bastard lol

did my escort on gmaxx pretty shure it was the fact it was a escort which made it handle worst Dodgy

I be doing my manifold with autosol gave up after a few hours and decided to take it off andnspray it Smile

I do quite like gmax aha it's good for a road car.

I'll be saving for bilstein in the meantime but I just wanted something half decent on there for show season.

I'm moving out of the mothers house soon so can't splurge silly money on shinies like bilstein lol :-(


RE: Ozonehostiles Oem+ gti6 - C2K - 05-05-2014

Just fabricate a small Shack in the corner of your unit tbh, simples.


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 05-05-2014

Service day today:

Dropped the gear oil out, definitely not been change in a while aha [Image: 20140505_124637_zpsvrlpxxmc.jpg]

Engine oil next, was so diluted it was basically more petrol than oil [Image: 20140505_130544_zpsapaqoptb.jpg]

Both fluids filled up with Peugeot recommended total oil

Next up sparkplugs and cleaned the coilpacks, good call on my behalf as the plugs in there were wrong,now replaced with pug recommend ngk


Drained the brake fluid, refilled and bled with new fluid

Cleaned out the throttle body and icv

Removed rusty old airbox, ready for replacement now



Next job for tomorrow is fix the blowing exhaust between the cat and midbox, flush the coolant and refill and fit my ph1 seats :-)


RE: Ozonehostiles Oem+ gti6 - RetroPug - 05-05-2014

Nice, pug oils and NGK plugs will make a good difference!
Bet that gearbox oil stank a bit....


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 05-05-2014

(05-05-2014, 06:38 PM)RetroPug Wrote: Nice, pug oils and NGK plugs will make a good difference!
Bet that gearbox oil stank a bit....

yeah lol, putting the right plugs in is probably the biggest single improvement ive made aha

old gear oil smells like onion rings to me, anyone else? haha


cant wait to fit my bbm gear linkages, should be a winning combo with fresh oil Big Grin


Re: Ozonehostiles Oem+ gti6 - kentiiboii - 05-05-2014

Ive gone for all orignal service parts on mine including recommended oil, gear oil and spark plugs. Mine was a huge difference over my dads. Just need to do gear oil and fuel filter tomorrow.


RE: Ozonehostiles Oem+ gti6 - ozonehostile - 05-05-2014

(05-05-2014, 09:07 PM)kentiiboii Wrote: Ive gone for all orignal service parts on mine including recommended oil, gear oil and spark plugs. Mine was a huge difference over my dads. Just need to do gear oil and fuel filter tomorrow.

only the best for the '6 haha

i knew mine would have the wrong sparkplugs, there's no way normal people would pay extra for the recommended ones when you can get some ngk that fit for about £8 haha


Re: Ozonehostiles Oem+ gti6 - kentiiboii - 05-05-2014

I only paid £8 for the recommended ngk ones anyway.


RE: Ozonehostiles Oem+ gti6 - RetroPug - 05-05-2014

What are the actual Peugeot-recommended plugs? I think they often came with champion ones from the factory iirc, however the correct NGK plugs (BKR6EK) are cheap and good. No need for 25 pound super irridium kryptonite thermonuclear race plugs or whatever the cool kids are buying these days.

Kentiiboii the pug gearbox oil makes a really good difference, or did for me anyway.


Re: Ozonehostiles Oem+ gti6 - kentiiboii - 05-05-2014

They're the ngks that I have.

Yeah ive had the gear oil there for a while, just been busy with other stuff for it.