+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Jons Wagon Thread. Questions will be asked (a lot) (/showthread.php?tid=18869)
RE: Jons Wagon Thread. Questions will be asked (a lot) - Jonny81191 - 09-12-2013
Jon I have a mint front pair of half leathers if you're interested?
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 09-12-2013
Cheers buddy. It was more of a question for the moment as I'm broke.
I'll bare it in mind for the future though. Unless they're cheaper than the proverbial budgie
RE: Jons Wagon Thread. Questions will be asked (a lot) - Jonny81191 - 09-12-2013
Make me an offer if you want, I can always say no
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 09-12-2013
£7.62, half a pack of gum and some assorted pocket fluff. Lol.
Seriously though, I can't afford anything untill tge new year.
Chrismas is expensive in my house, the wife and daughter have horses & 2 new saddles aren't cheap :O
Lol
RE: Jons Wagon Thread. Questions will be asked (a lot) - Jonny81191 - 09-12-2013
Fair enough man, they're not going anywhere so give me a shout if and when you want them?
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 09-12-2013
If you could pm me what your looking for, for them, I know how much overtime put in. Pol
RE: Jons Wagon Thread. Questions will be asked (a lot) - Dum-Dum - 09-12-2013
(05-12-2013, 03:42 AM)Lego Jon Wrote: Blatantly stole this link. Pretty much a blow by blow fitting guide for HDI Fmic.Theres a few bits I dont like in that guide but Its not bad.
http://www.club-306.com/topic/12625-hdi-front-mount-intercooler-fitting/
Dont cut down a bottom pipe as itll split.
Dont bother with gasket paper as the proper gasket is pennies
And try and use as few joiners as possible as theres one bit where hes got about half a dozen clamps within a foot of pipe run. If you want to join metal to metal get them welded.
(09-12-2013, 04:04 PM)Lego Jon Wrote: Finally sorted out my hockey stick.
My pug finaly doesn't look like it's had a stroke.
LMFAO.
Still missing the cap for my roof bar... doh!
So, a question....
I've got half leather seats that are well past their prime.
Can I swap them out for another set of 5 door seats?
Also I have grey cloth door cards, can they be swapped out so they match the seats?
Do they need to be phase specific and are they straight swap from a 5 door?
Depending on how bad your 5dr seats are I'd do a straight swap for my BMW ones and their mounts
Oh and any 5dr seats will fit out of any phase but early ones wont have the airbags.
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 09-12-2013
Yeah, I wasn't planning on having that many joins as its too much of a risk. Weak links in the chain and all that.
Well to be honest, on the seat cushion (drivers) theres a patch of leather worn away mate. The pass is fine.
Thanks for the kind offer.
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 10-12-2013
A few bits today...
![[Image: IMG-20131210-WA0002_zpsb9bf6aee.jpg]](http://i833.photobucket.com/albums/zz256/DeviousST162/IMG-20131210-WA0002_zpsb9bf6aee.jpg)
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 12-12-2013
Just in case you were wondering, the part number for the cast top piece thermostat housing is 1336p2 from pug and is £11.06 +vat.
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 17-12-2013
Well, sorted the tensioner out. It was easier with the engine dropped. Lol.
Also got my new tailgate badge on.
![[Image: 20131217_212501_zps011d7645.jpg]](http://i833.photobucket.com/albums/zz256/DeviousST162/20131217_212501_zps011d7645.jpg)
And a few shots of the wagon and my brother in laws 205 DT ...
![[Image: 20131217_212202_zps771c2fc8.jpg]](http://i833.photobucket.com/albums/zz256/DeviousST162/20131217_212202_zps771c2fc8.jpg)
![[Image: 20131217_212050_zps986f0752.jpg]](http://i833.photobucket.com/albums/zz256/DeviousST162/20131217_212050_zps986f0752.jpg)
![[Image: 20131217_211945_zpsb7087d23.jpg]](http://i833.photobucket.com/albums/zz256/DeviousST162/20131217_211945_zpsb7087d23.jpg)
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 03-01-2014
So, what size are the front and rear wipers on the Estate?
Cheers
RE: Jons Wagon Thread. Questions will be asked (a lot) - Eeyore - 03-01-2014
the rear wiper youll have to order from peugeot. They didnt stock it last time i went. The halfords ones and ebay ones dont fit properly. I was driving along at 50 and used the rear wiper and it came off (probably hit the car behind) and scratched my window!
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 03-01-2014
Ok. I'll bear that in mind.
What about the fronts? My drivers smears like fook and is annoying me.
Also about that cap mate. How much you want etc?
Ta
RE: Jons Wagon Thread. Questions will be asked (a lot) - Poodle - 03-01-2014
Fronts are 20" and 22" iirc, but a tape measure/ruler/bit of string looped round an lp a few times will tell you if you'd rather be sure.
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 03-01-2014
Mine are cheap equal 19" ones, tis why I asked
RE: Jons Wagon Thread. Questions will be asked (a lot) - Poodle - 04-01-2014
Ah i see, sorry haha! These are the ones i buy: http://www.ebay.co.uk/itm/330706284414?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Wasn't sure what the quality would be like, but 20k miles later and they're still going strong, so...
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 04-01-2014
Awesome. Cheers dude.
RE: Jons Wagon Thread. Questions will be asked (a lot) - mikey b - 05-01-2014
Boot badge looks good and I see you have some nice shiny boost pipes
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 05-01-2014
Cheers bud.
Yup a bit of bling to add some zing. Got all the parts just need a spare day to get it done.
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 10-01-2014
Well a bit of late night surprise expenditure but im pleased.
![[Image: 20140110_185535_zpsxk5znyhc.jpg]](http://s833.photobucket.com/user/DeviousST162/media/Mobile%20Uploads/20140110_185535_zpsxk5znyhc.jpg.html)
![[Image: 20140110_185556_zpsrhu4nm7q.jpg]](http://s833.photobucket.com/user/DeviousST162/media/Mobile%20Uploads/20140110_185556_zpsrhu4nm7q.jpg.html)
Obviously the latter lot needs refurbing but they'll look awesome.
Jons Wagon Thread. Questions will be asked (a lot) - Jtrigga - 10-01-2014
I think that you will need more pipes but good luck hope to see good things.
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 11-01-2014
Popped on the wheels today. Scrub like crazy. Need some spacers. At least 5 mm prob more like 10 tbh.
![[Image: 20140111_115343_zpsai0ohewl.jpg]](http://s833.photobucket.com/user/DeviousST162/media/Mobile%20Uploads/20140111_115343_zpsai0ohewl.jpg.html)
RE: Jons Wagon Thread. Questions will be asked (a lot) - Lego Jon - 28-01-2014
Disaster has struck. It would seem that the alternator has died. Does anyone have one up for grabs. 2.0l hdi. Help!!