![]() |
chris_90 106 derv project xsi rep, turbo NAD ;) - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38) +--- Forum: Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=39) +--- Thread: chris_90 106 derv project xsi rep, turbo NAD ;) (/showthread.php?tid=13602) |
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 01-06-2013 (31-05-2013, 11:01 PM)SRowell Wrote: looks tidy. Not really a fan of flat arches. Needs moar lows! Thanks ![]() (01-06-2013, 09:33 AM)306carter Wrote:(31-05-2013, 08:31 PM)306carter Wrote: Looks good man. Needs wing mirrors painting. Good man, s2 dash is a cheap and easy upgrade. Also s2 door cards. Will look loads better lowered. [/quote] Are door cards a straight swap then? Wrapped roof today not done bad at all to say its my first time, just made a bit of a mess trimming round the aerial and boot ![]() ![]() ![]() ![]() ![]() ![]() Comments welcome ![]() RE: chris_90 106 derv project Roof wrapped :) - Mattcheese31 - 01-06-2013 lows and tint the side repeaters and will look sweet . . ![]() chris_90 106 derv project Roof wrapped :) - MarkTD - 01-06-2013 Looks good mate ![]() RE: chris_90 106 derv project Roof wrapped :) - Danny2009 - 01-06-2013 Haven't hung about with this have you pal looking good now RE: chris_90 106 derv project Roof wrapped :) - Chris_90 - 01-06-2013 (01-06-2013, 04:00 PM)Mattcheese31 Wrote: lows and tint the side repeaters and will look sweet . . I was thinking that with the indicators just need to find some one with some tint cos don't want to buy a full tin for sake of them two small bits (01-06-2013, 04:52 PM)MarkTD Wrote: Looks good mate Thanks mate ![]() (01-06-2013, 04:59 PM)Danny2009 Wrote: Haven't hung about with this have you pal looking good now No seems to have gone quick once it lowered chances are I will get bored because there's nothing else to do it ![]() ![]() RE: chris_90 106 derv project Roof wrapped :) - procta - 03-06-2013 looking good, was it a f*ck on cutting the archs? RE: chris_90 106 derv project Roof wrapped :) - Chris_90 - 03-06-2013 (03-06-2013, 01:44 PM)procta Wrote: looking good, was it a f*ck on cutting the archs? Really easy tbh got jigsaw with the finest blade possible, marked round the plastic arch, free handed the last bit, then cut them. Up close you can tell there cut as i went off just slightly but i think you could only tell if you u new it was a rep. If some one didnt no doubt they would spot tbh. Fitting the whole kit was alot easier than i expected took around 1 hour or just over. RE: chris_90 106 derv project Roof wrapped :) - Chris_90 - 03-06-2013 Bit of an update put a powerflex engine mount on feels great to drive the the vibrations are way to much for me even with turning the idle up, so will be comeing off again. If possible can some one do me a photo shop of my car with some 15 inch lenso bsx alloys on please ![]() RE: chris_90 106 derv project, powerflex engine mount/ Photoshop request please :) - samass - 04-06-2013 Getting rid of the powerflex mount? Swap it for an OEM one? RE: chris_90 106 derv project, powerflex engine mount/ Photoshop request please :) - Chris_90 - 04-06-2013 (04-06-2013, 10:25 AM)samass Wrote: Getting rid of the powerflex mount? Swap it for an OEM one? Its for sale mate £25 ovno but got oem mount back on as the powerflex mount i bought is in a mount ready to bolt on so didnt have to mess takeing oem one out. but be warned if you fit a powerflex mount on your derv the dash will fall off ![]() Bit of an update finally got round to changing fuel and air filter ![]() ![]() Might move a bit better now but not got my hopes up ![]() RE: chris_90 106 derv project, powerflex engine mount/ Photoshop request please :) - Chris_90 - 05-06-2013 Will be getting these wheels soon heres a photoshop some one did for me, not sure if it will look this good in real life but should look good. ![]() Comments welcome ![]() RE: chris_90 106 derv project, Photoshop opinions please :) - Mattcheese31 - 05-06-2013 i'm liking that tbf . . . ![]() RE: chris_90 106 derv project, Photoshop opinions please :) - bigcheez2k3 - 05-06-2013 That's looking good. Lenso BSX? Been thinking of a set of those myself, in 16". RE: chris_90 106 derv project, Photoshop opinions please :) - ginge191 - 05-06-2013 those wheels, that heigh, that colour, that model all together looks awesome!! ![]() RE: chris_90 106 derv project, Photoshop opinions please :) - Chris_90 - 05-06-2013 Yer lenso bsx 15's tho not got them yet but shouldn't be long till I do get them tho, if I can get it looking that good full of win but not quite sure It will be that low as still need to be practical get over bumps etc RE: chris_90 106 derv project, Photoshop opinions please :) - ozonehostile - 09-06-2013 when you drove away yesterday, the exhaust noise was brilliant, absolutely no way you would ever guess it was a diesel, it sounded like a saxo vtr! RE: chris_90 106 derv project, Photoshop opinions please :) - Chris_90 - 09-06-2013 (09-06-2013, 09:58 AM)ozonehostile Wrote: when you drove away yesterday, the exhaust noise was brilliant, absolutely no way you would ever guess it was a diesel, it sounded like a saxo vtr! Really?? I thought it sound shit lol to be fair I've never stood out side why it's being driven off. Have to get some one to drive it for me Pics comeing of wheels soon washed them today gonna polish them tomorrow ![]() RE: chris_90 106 derv project, New wheels lenso bsx :D - Chris_90 - 09-06-2013 so bit of an update, picked up these wheels of zakk yesterday my god they was a mess a a massive amount of shite all over them was abit worried that they might have corroded under all the muck and dirt, but took the risk and bought them didnt take any pics of the mess they was in but wish i did lol any way first one i washed up and polished as best as i could how people clean these my fingers are killing from cleaning one ![]() ![]() ![]() ![]() need to get some 45 profile tyres and then i can test fit them see how they fit on the 106 : D Comments welcome RE: chris_90 106 derv project, New wheels lenso bsx :D - sam - 09-06-2013 40 profile would look epic when its slammed RE: chris_90 106 derv project, New wheels lenso bsx :D - ozonehostile - 09-06-2013 kind of ashamed about the mess they were in but when the 405 died i lost all interest in them and shoved them in storage as they were ![]() glad they've cleaned up nice though, knew they would! RE: chris_90 106 derv project, New wheels lenso bsx :D - puglove - 09-06-2013 s1 106s were made for these wheels. Seen a cosak one at pugfest last year and that was pure porn RE: chris_90 106 derv project, New wheels lenso bsx :D - Jimbo - 09-06-2013 What u gonna do about the bent one? RE: chris_90 106 derv project, New wheels lenso bsx :D - Chris_90 - 09-06-2013 (09-06-2013, 05:51 PM)Jimbo Wrote: What u gonna do about the bent one? Get it repaired or see what it's like but looking on net probably not £50 to bend it back shouldn't be a big job (09-06-2013, 03:10 PM)sam Wrote: 40 profile would look epic when its slammed It would also brake my back lol looking for Tyres at min and tempted with 195/50's as there so much cheaper but not 100% sure yet (09-06-2013, 03:28 PM)ozonehostile Wrote: kind of ashamed about the mess they were in but when the 405 died i lost all interest in them and shoved them in storage as they were Yer they were a mess, few marks on the bent one that it's started corroeding hopefully don't go to bad but will see how it goes (09-06-2013, 04:42 PM)puglove Wrote: s1 106s were made for these wheels. Seen a cosak one at pugfest last year and that was pure porn Not seen a s1 with these on tbh you got any pics?? RE: chris_90 106 derv project, New wheels lenso bsx :D - sam - 09-06-2013 Ive got 40 profile and there fine bud just a tad rougher than usual but looks loads better RE: chris_90 106 derv project, New wheels lenso bsx :D - 7057sam - 09-06-2013 Them wheels are seriously sweet ![]() RE: chris_90 106 derv project, New wheels lenso bsx :D - Chris_90 - 10-06-2013 finished cleaning last of the wheels if i ever have to clean them agin it will be to soon, any one got any good tips on keeping them clean and shiny?? ![]() ![]() ![]() ![]() Ready for some tyres then can see how they fit ![]() Also just ordered fcs ticket so hope i get them on and lowered in time :-D Comments welcome ![]() RE: chris_90 106 derv project, New wheels lenso bsx :D - ozonehostile - 10-06-2013 I always waxed them and sprayed with alloy wheel protector stuff, it doesnt stop them getting dirty but it makes them alot quicker to clean as brake dust just comes off with the jetwasher and a sponge RE: chris_90 106 derv project, New wheels lenso bsx :D - Niall - 10-06-2013 That looks quality! Making me really want another 106 lol. Always loved the S1s and when i had mine, i always wanted a 1.6 XSi. Dont know how i got side tracked to their bigger brothers lol RE: chris_90 106 derv project, New wheels lenso bsx :D - Chris_90 - 10-06-2013 (10-06-2013, 04:49 PM)ozonehostile Wrote: I always waxed them and sprayed with alloy wheel protector stuff, it doesnt stop them getting dirty but it makes them alot quicker to clean as brake dust just comes off with the jetwasher and a sponge Never used wax in my life were can I get some from what do I do just spray it on the wheels?? Sorry for the dumb questions but like I say never used it before (10-06-2013, 04:50 PM)Niall Wrote: That looks quality! Making me really want another 106 lol. Always loved the S1s and when i had mine, i always wanted a 1.6 XSi. Dont know how i got side tracked to their bigger brothers lol Never been a fan of s1 106's until I started putting the Xsi Kit on now I love it just wish it had more poke but sure I will just live with it or turbo it not sure yet quite fancy a Xsi but no good for my job need epic mpg's RE: chris_90 106 derv project, New wheels lenso bsx :D - ozonehostile - 10-06-2013 get some spray on carnuba wax, piss easy to apply and it protects them |