+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Nialls supercharged GTi6 - project tidy up (/showthread.php?tid=3684)
RE: Nialls GTi6 - It lives!! - Piggy - 09-02-2014
Ouch.
Did some JBweld come out to play?
RE: Nialls GTi6 - It lives!! - Paul_13 - 09-02-2014
I told you the heart exchanger didn't have the seal
I've got a sump if you need it mate
RE: Nialls GTi6 - It lives!! - Niall - 12-02-2014
(09-02-2014, 08:49 AM)Paul_13 Wrote: I told you the heart exchanger didn't have the seal
I've got a sump if you need it mate
lol i never realised that. Was obviously in a bit of a rush when putting it on. Ah well! Might take you up on that sump. how much do you want for it?
[attachment=13553]
More boost!
RE: Nialls GTi6 - It lives!! - Tom - 12-02-2014
More? You dont have any yet! lol
RE: Nialls GTi6 - It lives!! - Niall - 12-02-2014
(12-02-2014, 10:03 PM)Tom Wrote: More? You dont have any yet! lol
Well i do. Its just filling my engine bay with boost at the moment lol
RE: Nialls GTi6 - It lives!! - Dum-Dum - 13-02-2014
Ooh all the shiny
RE: Nialls GTi6 - It lives!! - jonas306 - 13-02-2014
Nice project, i will keep an eye..
RE: Nialls GTi6 - It lives!! - Niall - 16-02-2014
Not a huge amount done this weekend but it was successful overall for a change
The other week, i got the EPAS mostly fitted. I decided to relocate the pump to under the boot floor which meant a very expensive trip to Pirtek to get a high pressure line made up. I mounted that along the floor last time around but the low pressure hose they supplied me was too big so had to get some more. Got that run this weekend and got it all wired in and filled up. Works an absolute treat, is slightly heavier than the original which i like. Only thing is it whines a bit but I'm sure i can do something about that. You can only really hear it anyway when steering when parking. It just sounds like I have a chronic earth issue with my speakers
[attachment=13626]
[attachment=13628]
[attachment=13629]
Also the other week, i made a temporary repair to my cracked sump. Still going strong
[attachment=13627]
And finally, a comparison of old vs new charger pulley. This new one will see 5-6psi with any luck which should work out about 220bhp.
[attachment=13630]
Oh and after i stopped feeling like death this morning, i washed it for the first time since September
[attachment=13631]
RE: Nialls GTi6 - It lives!! - 7057sam - 16-02-2014
Looking good mate
So what map are you running now? Got a date when it's going on the rollers
RE: Nialls GTi6 - It lives!! - Niall - 16-02-2014
(16-02-2014, 06:54 PM)7057sam Wrote: Looking good mate
So what map are you running now? Got a date when it's going on the rollers
At the moment its a standard map from a standard engine gti track car. Only issue is it has no cold start or idle control what so ever so its a prick to drive and over fuels like a right bastard unless your giving it some
Its booked in for the 8th of March
RE: Nialls GTi6 - It lives!! - Tom - 16-02-2014
That car is beautiful.
RE: Nialls GTi6 - It lives!! - RetroPug - 17-02-2014
This is practically 306 porn with those blue masks.
Keep up the good work!
RE: Nialls GTi6 - It lives!! - Craigus - 17-02-2014
Car looks sweet!
RE: Nialls GTi6 - It lives!! - Niall - 18-02-2014
http://youtu.be/fPpvYVZP-SA
RE: Nialls GTi6 - It lives!! - c.gerrard - 18-02-2014
BOOOOOOOOOOSSSSSSSSSSSSST
BAAAAAANGGGGGG
RE: Nialls GTi6 - It lives!! - lolsteve - 18-02-2014
Ah portrait camera footage, we meet again
Will this be making an appearance at the combe day in april?
RE: Nialls GTi6 - It lives!! - Niall - 18-02-2014
Nah i won't have the money unfortunately. First time it will be properly used in anger will be FCS
RE: Nialls GTi6 - Ready for mapping - vlj - 18-02-2014
Looking good honey!
RE: Nialls GTi6 - It lives!! - 7057sam - 18-02-2014
Sound like the number 69 bus I get from town
Need a decatted custom exhaust system now to go with the whine
(18-02-2014, 10:36 PM)Niall Wrote: Nah i won't have the money unfortunately. First time it will be properly used in anger will be FCS
Have you booked your track time yet??
RE: Nialls GTi6 - Ready for mapping - Niall - 18-02-2014
(18-02-2014, 10:42 PM)7057sam Wrote: Sound like the number 69 bus I get from town
Need a decatted custom exhaust system now to go with the whine
(18-02-2014, 10:36 PM)Niall Wrote: Nah i won't have the money unfortunately. First time it will be properly used in anger will be FCS
Have you booked your track time yet??
snigger...69
Nope not yet. Haven't even booked my ticket yet but will be payday
RE: Nialls GTi6 - Ready for mapping - 7057sam - 18-02-2014
(18-02-2014, 10:47 PM)Niall Wrote:(18-02-2014, 10:42 PM)7057sam Wrote: Sound like the number 69 bus I get from town
Need a decatted custom exhaust system now to go with the whine
(18-02-2014, 10:36 PM)Niall Wrote: Nah i won't have the money unfortunately. First time it will be properly used in anger will be FCS
Have you booked your track time yet??
snigger...69
Nope not yet. Haven't even booked my ticket yet but will be payday
I now never gets old
You planning on 2 hour or 15 minute session.Due to crashs last year I got 10-15 laps in about a hour n 1/2!!!!!
RE: Nialls GTi6 - Ready for mapping - sam - 18-02-2014
That's savage!
RE: Nialls GTi6 - Ready for mapping - Tallguy_2 - 19-02-2014
That's sweet man!!!
RE: Nialls GTi6 - Ready for mapping - Niall - 04-03-2014
So, a small update. Some good and bad news.
I dropped the charger off to my local engineering firm to have the pulley changed and they didn't do it. Not only did they not do it but they f*cked it up in the process of trying then had the cheek to ask me to pay them for attempting! So, plan now is to take the snout from my old charger and fit it to the new one then get the pulley changed at a later date.
More goodies have been turning up throughout the week so today, me and Grant (massive thanks to this faggot. Has been a hero helping out through many a dark cold night
) got some of them fitted. Got a new aux pulley fitted as i bought 2 rallye set ups. First was of an unknown condition so not fussed about that but the second i was told was absolutely fine and in fact, it rattles its tits off and makes the belt slap so I'm pissed off that I've been ripped off. Also got all the boost piping fitted and my oil catch tank so now all thats left is to fit the 440cc injectors, load the charged base map, start it and make sure it works ok and fill it with fuel ready to be picked up on Friday for mapping
[attachment=14049]
[attachment=14050]
[attachment=14051]
And one to show the lack of clearance under the bonnet. Thankfully the charger plate is being remade in a few weeks time so won't hit the bonnet.
Update friday hopefully with a dyno graph and some epic videos. Either that or a picture of GTi rods all over a dyno
RE: Nialls GTi6 - Ready for mapping - 7057sam - 04-03-2014
Looks epic mate
kinda makes me want to get back on the charger band wagon again
You using 95 or 97 ron as heard people running 95 and frying the pistons
RE: Nialls GTi6 - Ready for mapping - Tom - 04-03-2014
Some companys are cheeky bastards eh!!
Looks like a pretty full engine bay though, looks awesome none the less lol! Good luck for your mapping and running etc, hope it goes well...
And f*cking hauls ass!
RE: Nialls GTi6 - Ready for mapping - Niall - 04-03-2014
(04-03-2014, 10:11 PM)7057sam Wrote: Looks epic mate
kinda makes me want to get back on the charger band wagon again
You using 95 or 97 ron as heard people running 95 and frying the pistons
Im looking into that at the moment. Ive got every faith in TnR to map it fine on 95 (which i would prefer as its available at every petrol station) and I'm doubtful that it will melt any pistons at 220ish bhp
RE: Nialls GTi6 - Ready for mapping - RetroPug - 05-03-2014
Isn't 97 RON available pretty much everywhere these days?
RE: Nialls GTi6 - Ready for mapping - Piggy - 05-03-2014
Tesco 99ron for the bhp win
RE: Nialls GTi6 - Ready for mapping - Niall - 05-03-2014
More done today. Drove it to the petrol station to fill it up and it drove lovely except for the fact it wouldn't idle lol. Got home, got the charger replaced with the new one, filled with new oil, 440cc injectors in, boosted base map on and a oil and filter change. Started it up on the base map and it barely runs which was expected but at least it starts! Now tomorrow i need to start it and check all the sensors are working.
Oh and i got my boost gauge fitted
[attachment=14085]
[attachment=14086]
So almost there!!