![]() |
Puglove's supercharged 6, Repaint - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Puglove's supercharged 6, Repaint (/showthread.php?tid=2839) |
Re: Puglove's new Diablo 6 =) - puglove - 13-06-2012 Ok so cats pretty much out the bag. so here it is! Iv bought a lynx supercharger kit !!! whoooo so the plan is to go low boost achieving around 240-260BHP. I have a list of parts i still need and i have been in talks with Rich W about the parts that i need and i also have a full fitting guide. and to be honest it looks pretty straight forward. I also have a few bits i want to go with kit Needed for the kit: Intercooler low boost Ring Royle purple engine oil Parts i want: 4 pot willwoods gaz gold rear shocks MAYBE a LSD Im hoping to start fitting this at the end of show season this year. I also have a engine oil cooler to go with so the fun bit picys. ![]() ![]() ![]() ![]() ![]() ![]() ROTREX !!!!!!!!!! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Re: Puglove's new Diablo 6 =) - Ed Doe - 13-06-2012 You spelt Rotrex wrong :roll: Only slightly jealous!! ![]() Re: Puglove's new Diablo 6 =) - puglove - 13-06-2012 Ed Doe Wrote:You spelt Rotrex wrong :roll: I will take you for a ride when its done ![]() And i dont no what your talking about i spelt it spot on Re: Puglove's new Diablo 6 =) - Ed Doe - 13-06-2012 Hahaha! Such a gaylord ![]() ![]() Re: Puglove's new Diablo 6 =) - puglove - 14-06-2012 Ed Doe Wrote:Hahaha! Such a gaylordyou love it ![]() Ed Doe Wrote: Hoping to have it ready for xmas meet this year, so if your there i will take you for a hair raising spin ![]() RE: Puglove's new Diablo 6 S/C project - spawn - 15-06-2012 Looks spot on. RE: Puglove's new Diablo 6 S/C project - Grant - 15-06-2012 Love it! If i ask nicely, will you give me that setup? ![]() RE: Puglove's new Diablo 6 S/C project - puglove - 15-06-2012 (15-06-2012, 06:02 AM)Grant Wrote: Love it! yes mate not a problem. all you have to do is ask nicly and hand over a big wedge of cash and its your ![]() RE: Puglove's new Diablo 6 S/C project - Pompey306mark - 15-06-2012 Looking good. Can I make two suggestion. LSD, I think should not be in the maybe section. Should be on the I will buy and fit one. I have been in one with an LSD and one with out. Second you can get any 4 pots under cyclones with spaces, so don;t hold out for wilwood 4 pots. My Hi specs only just did not fit with a set a cyclones 5/10mm spacers would be enough to clear them. http://www.ebay.co.uk/itm/Hi-Spec-283mm-4-Pot-Brake-Calipers-Plus-Discs-And-Pads-Fit-Saxo-106-/270997921599?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f18bc1f3f RE: Puglove's new Diablo 6 S/C project - puglove - 15-06-2012 ok LSD should be a will get but as and when funds will allow. its not 100% important right away as its only a fast road weekend toy. with hardly any track days. so when it comes to acrually driving it alot again it will be next summer. and funds will hopfuly allow by then. also i dont want to space my cyclons out a masive amount and i dont want to spend mega money on somthing like hispecs. i have my eye on a set of willwoods for £320 with near new discs and pads cheers for the advise RE: Puglove's new Diablo 6 S/C project - Pompey306mark - 15-06-2012 Wilwoods need spacers too. Set of hi spec on eBay for £400 or best offer. RE: Puglove's new Diablo 6 S/C project - Ed Doe - 15-06-2012 Jamie, I can spin the inside wheel with my car on tight corners with the grip the coilies/eccentric topmounts give, you'd be advised with 240-260hp to upgrade to an lsd as a priority imo if you're an 'enthusiastic' driver in any way ![]() RE: Puglove's new Diablo 6 S/C project - Pompey306mark - 15-06-2012 Only the rally design wilwood kit don't use spacers. RE: Puglove's new Diablo 6 S/C project - puglove - 15-06-2012 what size spacer would i need for the hispec? i dont want anything like 20mm like brembos. i can live with the 12 that are need with willwoods RE: Puglove's new Diablo 6 S/C project - Pompey306mark - 15-06-2012 I am not 100% sure I have to use 20mm spacers on my borbets to clear the hi specs. I test fitted my 16" et 15 superturismos and they were fine. When I tried a cyclone it was on the hub but touching the calipers. I would say its going to be the same as the wilwoods. Maybe even less as it did not look like there was much in it. RE: Puglove's new Diablo 6 S/C project - darrenjlobb - 15-06-2012 Although im not a huge fan of the lync charger kit / supercharged 6's in general, its good to see another one on the forum, as this place dosnt have near enough blown pervs around!! Get it mounted! RE: Puglove's new Diablo 6 S/C project - Niall - 15-06-2012 Shit just got epic ![]() RE: Puglove's new Diablo 6 S/C project - Ruan - 15-06-2012 Glad to see a 'charged perv on here, I'm not the biggest fan of these kits, I'm sure everyone knows why... If you need a hand or anything whenever, give me a shout, I'm not that far away! ![]() RE: Puglove's new Diablo 6 S/C project - puglove - 15-06-2012 (15-06-2012, 09:16 AM)darrenjlobb Wrote: Although im not a huge fan of the lync charger kit / supercharged 6's in general, its good to see another one on the forum, as this place dosnt have near enough blown pervs around!! Well this is my thinking see, Theres plenty of powerful charged dervs on here so i thought id give the perv a go ![]() (15-06-2012, 09:17 AM)Niall Wrote: Shit just got epic OOOO yes you no it ![]() (15-06-2012, 09:37 AM)Ruan Wrote: Glad to see a 'charged perv on here, I'm not the biggest fan of these kits, I'm sure everyone knows why... I will be calling on you when im having issues now you have offered ![]() RE: Puglove's new Diablo 6 S/C project - Ruan - 16-06-2012 No problem at all bud, any time! Be nice to work on a Petrol and be able to say all the reasons it's broken is because "It's a Petrol..." ![]() RE: Puglove's new Diablo 6 S/C project - puglove - 16-06-2012 (16-06-2012, 12:55 AM)Ruan Wrote: No problem at all bud, any time! It wont break it will just be amazing and work really well........maybe not seeing as iv got to fit it lol RE: Puglove's new Diablo 6 S/C project - Jonny b - 16-06-2012 nice work bud!! looks sweeeeet another+1 for the lsd though RE: Puglove's new Diablo 6 S/C project - 4WayDiablo - 16-06-2012 Awesome work :-) if I had the money ... lol RE: Puglove's new Diablo 6 S/C project - puglove - 18-06-2012 (16-06-2012, 08:40 AM)Jonny b Wrote: nice work bud!! looks sweeeeet another+1 for the lsd though Cheers bud ![]() (16-06-2012, 01:11 PM)4WayDiablo Wrote: Awesome work :-) if I had the money ... lol Cheers mate ![]() RE: Puglove's new Diablo 6 S/C project - Dum-Dum - 19-06-2012 Awesome mate, another vote for making an LSD a priority from me too. Any of my diesels have been an absolute nightmatre in any corner, even in 3rd gear in the dry sometimes. Power is nothing if all you do with it is make tyre smoke. RE: Puglove's new Diablo 6 S/C project - Ed Doe - 19-06-2012 (19-06-2012, 12:10 PM)Dum-Dum Wrote: . Power is nothing if all you do with it is make tyre smoke. Dumdum are you feeling ok?! RE: Puglove's new Diablo 6 S/C project - puglove - 19-06-2012 (19-06-2012, 12:10 PM)Dum-Dum Wrote: Awesome mate, another vote for making an LSD a priority from me too. It is good a good thing.........if your drifting and i cant imagine the 6 would be all that great. But yeah a lsd is now on the list ![]() RE: Puglove's new Diablo 6 S/C project - devils_fuel - 19-06-2012 what have i missed....can you take me car parts shopping with your card ? ![]() RE: Puglove's new Diablo 6 S/C project - Dum-Dum - 19-06-2012 (19-06-2012, 12:16 PM)Ed Doe Wrote: Dumdum are you feeling ok?! (19-06-2012, 01:02 PM)puglove Wrote: It is good a good thing.........if your drifting and i cant imagine the 6 would be all that great. But yeah a lsd is now on the list Nah even drifting you need an LSD as you look like a right knobber smoking one tyre. This is why Im on ebay looking for an M3 LSD RE: Puglove's new Diablo 6 S/C project - puglove - 19-06-2012 No you dont! Pop round mine ill drag the welder out and weld that sucker up for youn that will get both wheels spinny for a fraction of the cost. Well in the short term anyway |