+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Cheap phase 1 and trying to make the most of it (/showthread.php?tid=23458)
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 15-05-2014
Started painting front bumper tonight
[attachment=16294][attachment=16295]
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-05-2014
Don't think it came out to bad for my first attempted
[attachment=16296]Just needs bolting up now[attachment=16297]
RE: Cheap phase 1 and trying to make the most of it - willJspears - 16-05-2014
Looking good bud
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-05-2014
cheer cap have to come round when the 6 is on the road
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-05-2014
Cheeky pic
[attachment=16313]
RE: Cheap phase 1 and trying to make the most of it - Piggy - 16-05-2014
All looks good
Just need to take pics the right way up!
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 16-05-2014
Test to see if the photo flips it self [attachment=16314]
(16-05-2014, 09:55 PM)Piggy Wrote: All looks good
Just need to take pics the right way up!
That better
RE: Cheap phase 1 and trying to make the most of it - willJspears - 17-05-2014
Whats next on the to-do list?
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 17-05-2014
Paint callipers because I still haven't done it going to take the exhaust off so I can lift the car with the forklift then steam clean and wax oil
RE: Cheap phase 1 and trying to make the most of it - mr_fish - 19-05-2014
Quote:so I can lift the car with the forklift then steam clean and wax oil
Exactly what I'm doing with the 206
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 19-05-2014
Forklift beats and car ramp
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 27-05-2014
Picked these up cheap tonight with new rubber all round
[attachment=16483]What wheels look better ? [attachment=16484]
Yes I no it needs lows but mot comes first
RE: Cheap phase 1 and trying to make the most of it - Danny2009 - 27-05-2014
White
RE: Cheap phase 1 and trying to make the most of it - willJspears - 28-05-2014
+1 for white
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 28-05-2014
will Thought u would have said Gray will so u could have the white clones lol
RE: Cheap phase 1 and trying to make the most of it - willJspears - 28-05-2014
well whichever you choose, white or grey would go with china, if you was to sell a set
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 01-06-2014
Bit of an update car over at mr lobbs getting some small problems sorted as I now need it on the road ASAP so mot thrusday I am hoping as my disco spat a rod today fml.[attachment=16571]what I found on the road
RE: Cheap phase 1 and trying to make the most of it - Piggy - 02-06-2014
Thats amazing!!! Good job on that there mate!!!
Didnt realise they were prone to spitting rods
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 02-06-2014
Neither did I. all well she still starts and tix over on 3 lol so I'm on the look out for a cheap 300tdi lump if you no of any
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 05-06-2014
Just sorted out my insurence
Mot at half 10 hoping she will pass
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 05-06-2014
Pass mot now after failing on a drop like and a brake pipe
also all tax so now on the road at last
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 26-06-2014
Bit of an update as I have been f*cking around with the landy not had the time to do anything to the car but as my back box has fall off 2 times not thought I would bodge something up this is what happened [attachment=17179]
[attachment=17180]
[attachment=17181]
[attachment=17183]
RE: Cheap phase 1 and trying to make the most of it - willJspears - 27-06-2014
Looks better like that than with the power flow on. Now i can have the power flow to go on my '6'
RE: Cheap phase 1 and trying to make the most of it - silverzx - 27-06-2014
(01-06-2014, 11:26 PM)daniel909 Wrote: Bit of an update car over at mr lobbs getting some small problems sorted as I now need it on the road ASAP so mot thrusday I am hoping as my disco spat a rod today fml.what I found on the road
But disco's couldn't possibly throw rods, EVERYONE knows only "Peugeots" do that!
Seriously, bad luck, I bet thats a rarity.
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 27-06-2014
(27-06-2014, 07:12 AM)willJspears Wrote: Looks better like that than with the power flow on. Now i can have the power flow to go on my '6'
Sounds better for sure got really pissed off with the arc welder as was on the lowest setting poss and was still blowing holes
But disco's couldn't possibly throw rods, EVERYONE knows only "Peugeots" do that!
Seriously, bad luck, I bet thats a rarity.
[/quote]
Yeah was a bit of bad luck I guess as I posted on a landy owners group to see if it happened to anyone else 2 they all said it was in common
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 22-07-2014
Had to go buy a new tensor today and mine finally Broke off it been sounding bad for about 3 weeks lol
Mill auto wanted £94.60 so I told them to f*ck off
Mike best was £ 36
[attachment=17907]
RE: Cheap phase 1 and trying to make the most of it - willJspears - 22-07-2014
whens the bosch going on? are you still thinking of selling this one?
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 23-07-2014
Finally got a Bosch pump hoping to have it fitted in the next few weeks
[attachment=17947]
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 28-08-2014
Finally got rid of the Lucas shit and swapped with a Bosch thanks to the help of Darren. Gave her a small tune up but the clutch is slipping pretty bad so just going to take it easy for a week or two till I get the clutch done. thanks frosty for the injectors and cheers for modding them lines Darren
[attachment=18631]
RE: Cheap phase 1 and trying to make the most of it - daniel909 - 28-08-2014
Also had Ida pin ground by mr lobb while he was on the phone to Ruan :/ grinder in one hand pin in the other. Talk about precision engineering
[attachment=18632]