+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38)
+--- Forum: Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=39)
+--- Thread: S1 106 dturbo (sleeper) (/showthread.php?tid=22652)
RE: S1 106 dturbo (sleeper) - Martin306 - 06-04-2014
(05-04-2014, 01:09 PM)Teddy Wrote: i am after some uprated mounts as the inlet sits very close to steering rack :O
![[Image: 10001321_668440076551166_241154761_n_zps0a51910a.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/10001321_668440076551166_241154761_n_zps0a51910a.jpg.html)
that's not the steering rack
That's the brake bar for the master cylinder.
Bash that and you'll have no brakes lol
RE: S1 106 dturbo (sleeper) - procta - 06-04-2014
Christ that's close!
RE: S1 106 dturbo (sleeper) - Teddy - 06-04-2014
You sure that's the brake bar ? Seams to go to struts
got some parts this morning swap a lad some 306 parts for this tidy lot
fully polly bush bottom arms, gti6 brakes, bucket seats with runners and harness do need a gd clean 2 intercoolers and loads off boost pipes ![[Image: 10013925_668849523176888_843957338_n_zps20a24b63.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/10013925_668849523176888_843957338_n_zps20a24b63.jpg.html)
RE: S1 106 dturbo (sleeper) - Teddy - 06-04-2014
![[Image: 10172831_668923923169448_1665116220_n_zps370c8a20.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/10172831_668923923169448_1665116220_n_zps370c8a20.jpg.html)
seats fitted
RE: S1 106 dturbo (sleeper) - Martin306 - 06-04-2014
Definitely, 100% that is the brake bar.
Press the brake pedal and watch it
RE: S1 106 dturbo (sleeper) - ash23 - 06-04-2014
good progress mate but those banded steels look crap tho
would look better on a silver estate haha
RE: S1 106 dturbo (sleeper) - Teddy - 06-04-2014
(06-04-2014, 03:30 PM)ash23 Wrote: good progress mate but those banded steels look crap tho
cheers chap tbh 9j is a bit wide for the 106 really need 8j
RE: S1 106 dturbo (sleeper) - ash23 - 06-04-2014
they do look very wide lol get them on with some arch extentions
RE: S1 106 dturbo (sleeper) - Piggy - 06-04-2014
banded doesnt suit the theme to me...too much "look at me and my chavvy tyre shredding, tramlining car."! imo!
Need some C5 steelies to keep it sleeper and light!
like the buckets though
be interested to see how you get on with those lower arms...need to do the mrs, and havnt lifted the carpet to find the bolts yet!
RE: S1 106 dturbo (sleeper) - Teddy - 06-04-2014
i do like banded steel they just stick out the arch about 2 foot
RE: S1 106 dturbo (sleeper) - Teddy - 07-04-2014
going to have a go at fitting front mount this afternoon its going to be tight as there is f*ck all room
RE: S1 106 dturbo (sleeper) - Martin306 - 07-04-2014
No room for a fmic?
My S2 has LOADS of space in front of the rad, is the rad still in it's original place? Maybe the s1 has less of a gap? I never really noticed.
RE: S1 106 dturbo (sleeper) - Teddy - 07-04-2014
the bottom off the bumper sits very close to slam panel so really hard to get a pipe between it with out cutting bumper cant move rad as there no room to move it back
RE: S1 106 dturbo (sleeper) - Chris_90 - 07-04-2014
If you fit the Renault oil filter that might free some room up, what radiator is on this? Nor still on the 1.5d one is it?
RE: S1 106 dturbo (sleeper) - Teddy - 07-04-2014
made a start before it chucked it down with rain left side is fine it right side i got problems trying to make it fit round bumper
![[Image: 1621981_669533049775202_1703244281_n_zpse7980a40.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/1621981_669533049775202_1703244281_n_zpse7980a40.jpg.html)
RE: S1 106 dturbo (sleeper) - Chris_90 - 07-04-2014
Run it under chassis leg can see this over heating on that radiator tbh mine gets quite hot some times, so being a d turbo bet it will get mega hot would look in to a bigger radiator if possible tbh
RE: S1 106 dturbo (sleeper) - Teddy - 07-04-2014
(07-04-2014, 06:58 PM)Chris_90 Wrote: Run it under chassis leg can see this over heating on that radiator tbh mine gets quite hot some times, so being a d turbo bet it will get mega hot would look in to a bigger radiator if possible tbh
thats the plan lad there hole cut in the wing to run it through i bet it propperly will had it running for about 10mins the other day when setting pump it didnt really get that hot
its running a smaller oil filter but its about 1/2 away from starter motor and alternator
RE: S1 106 dturbo (sleeper) - Chris_90 - 07-04-2014
Probably won't get on tick over but boosting around I'm sure it will start to rise
RE: S1 106 dturbo (sleeper) - Teddy - 07-04-2014
True chap will might have to look at a 205 rad might be bit bigger
RE: S1 106 dturbo (sleeper) - Chris_90 - 07-04-2014
(07-04-2014, 07:37 PM)Teddy Wrote: True chap will might have to look at a 205 rad might be bit bigger
It's longer but shorter and not as thick looked at putting one on mine other day, think I'm gonna try a ph2/3 rad but not sure yet
RE: S1 106 dturbo (sleeper) - Teddy - 07-04-2014
gd idea that pal
RE: S1 106 dturbo (sleeper) - Teddy - 08-04-2014
there we go done well chuffed
just need to make some mounting brackets for intercooler![[Image: 1979570_670007796394394_1399548924871264...a8a180.jpg]](http://s1345.photobucket.com/user/Teddy_Haslam/media/1979570_670007796394394_1399548924871264942_n_zpsbda8a180.jpg.html)
RE: S1 106 dturbo (sleeper) - Piggy - 08-04-2014
Nice one.
Not sure if it helps, but on my mrs nad, doesnt matter if you rag, cruise or sit in traffic, temp never goes above halfway...
Only thing going for it is its got a 12month old gen rad.
RE: S1 106 dturbo (sleeper) - Teddy - 10-04-2014
not much to update really got some 30mm springs today drivers wheel bearing is shagged to got to order a new 1
RE: S1 106 dturbo (sleeper) - mr_fish - 11-04-2014
this could be a complete weapon...with a VNT
how have you got on with your engine mounts? she solid yet?
RE: S1 106 dturbo (sleeper) - devils_fuel - 11-04-2014
(29-03-2014, 09:54 PM)puglove Wrote: why did some one put all that effort into such a shed of a shell? lol. but once its xsi rep & resprayed should be smart, please please PLEASE spray it cossak
THIS
i agree with jamie for once
RE: S1 106 dturbo (sleeper) - Teddy - 11-04-2014
(11-04-2014, 10:24 AM)mr_fish Wrote: this could be a complete weapon...with a VNT
how have you got on with your engine mounts? she solid yet?
Waiting for some baker mounts to come in post
(11-04-2014, 11:08 AM)devils_fuel Wrote:(29-03-2014, 09:54 PM)puglove Wrote: why did some one put all that effort into such a shed of a shell? lol. but once its xsi rep & resprayed should be smart, please please PLEASE spray it cossak
THIS
i agree with jamie for once
Adds to the sleeper look being a complete shed
RE: S1 106 dturbo (sleeper) - welshpug - 11-04-2014
pipes look a bit big, what i.d are they?
RE: S1 106 dturbo (sleeper) - silverzx - 11-04-2014
I'm voting 2.5" (Xantia inlet is 2.25").
RE: S1 106 dturbo (sleeper) - Teddy - 11-04-2014
2 1/2 hole setup cost me £20 so cant grumble