+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project Yellow thing - coming to an end (/showthread.php?tid=16645)
RE: Project Marvin - Onward!!! OEM+ - John1.4 - 27-08-2014
This day gets better - got a package from NSW today, with a nice set of these:
[attachment=18614]
and one for the front
[attachment=18615]
unsure about this one, but it seemed the only logical place, i didn't like how it looked on the strip at the top of the window, and it's outside the swept area of the wipers so it doesn't interfere with line of sight etc
RE: Project Marvin - Onward!!! OEM+ - maxlee - 27-08-2014
looks way to small to be down the side IMO would have put it under the wiper maybe?
RE: Project Marvin - Onward!!! OEM+ - John1.4 - 27-08-2014
nah, it's as big as the black border around the glass, and looks ok in person, think it's just the camera that makes it look over small
RE: Project Marvin - Onward!!! OEM+ - John1.4 - 29-08-2014
[attachment=18637]
that is all
RE: Project Marvin - Onward!!! OEM+ - Eeyore - 29-08-2014
Wow cant get over how OEM+ this is. I stuck my MCM sticker on the top of the boot lid glass. Best place for it!
RE: Project Marvin - Onward!!! OEM+ - Dum-Dum - 29-08-2014
(29-08-2014, 11:37 AM)SRowell Wrote: Wow cant get over how OEM+ this is.
OEM + brightly coloured paint
RE: Project Marvin - Wheels nearly here! - John1.4 - 29-08-2014
sarcasm mr rowell? LOL i suppose oem+ went out the window the moment i cracked open the spray paint..
meh it is what it is.. makes me remember it's ok to laugh sometimes
RE: Project Marvin - Not nearly as OEM+ as i imagined - Kezzieboy - 29-08-2014
How much the studs and nuts set you back?
RE: Project Marvin - Not nearly as OEM+ as i imagined - John1.4 - 29-08-2014
£52 all in, if i'd gone for some different studs/nuts it would've been cheaper, but needed the flat seated ones for the arianes
RE: Project Marvin - Not nearly as OEM+ as i imagined - Dum-Dum - 29-08-2014
Actually Toyota ones are the best in Airanes as they kinda have a flat and a taper.
RE: Project Marvin - Not nearly as OEM+ as i imagined - Kezzieboy - 29-08-2014
That's not too bad, eBay?
RE: Project Marvin - Not nearly as OEM+ as i imagined - John1.4 - 30-08-2014
nah through rallydesign, got sent a new catalogue so been drooling over brakes and bits
RE: Project Marvin - Yellow thing - Wheels next :) - John1.4 - 02-09-2014
got a couple of things done today - had to swap out the sportex backbox for the old standard one as the baffles had come adrift, so it has to go back... or be binned
also took the front end to bits, did some rust prevention and black masked the headlights while i was at it
RE: Project Marvin - Yellow thing - Wheels next :) - John1.4 - 11-09-2014
pics will be up as soon a si find where i put my camera.... took loads of photos while doing that stuff, put it down and..not seen it since... FML
on another note, got my spacers ordered today and they should arrive tomorrow, so
RE: Project Marvin - Yellow thing - PHEW wheels on - John1.4 - 12-09-2014
Well.. the wheels are on
along with the stud conversion, and made the descision to go for a bit of a drive and borrow mum's camera for some arty shit[attachment=18942]
[attachment=18943]
[attachment=18944]
[attachment=18945]
[attachment=18946]
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - WiNgNuTz - 12-09-2014
Y'know what....i actually kinda like it! Got any lows in mind though, thats some pretty impressive arch gap at the front there.
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - Piggy - 12-09-2014
just so random its maaaaaad
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - WiNgNuTz - 12-09-2014
What tyres are they btw, and how much did you pay for them? If you dont mind me asking of course!
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - John1.4 - 12-09-2014
it'll proabably be coming down about 50mm in the front (if i can find any springs that'll do it on a 1.4) to match the rear, which surprisingly passes the shoe test - although that might be because i only own boots
they're Kenda keiser's - had them before and TBH they're pretty good, £50 a corner fitted balanced etc
had to ask the guy at the tyre place very nicely to order them in
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - Dum-Dum - 12-09-2014
Now this is awesome, very many likes John.
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - John1.4 - 12-09-2014
and even though that's edited, that's actually the colour it would have been if i'd done a white basecoat first, and done 2 more coats, tempted to go for it in a few months
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - Dum-Dum - 12-09-2014
It just looks so f*cking toxic but so plain at the same time its awesome especially on those new wheels and I think the silverness of them really makes the paint look a bit more factory in a weird way.
We do a white base coat if you like, Matt if the expert in painting cars with dulux and a roller if you want to PM him.
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - John1.4 - 12-09-2014
lol i'd go for another plastidip one so it doesn't wreck the coat, plus the basecoat white covers thick so you only need 1 layer, then relay the yellow properly, maybe get a glossifier or pearliser to mix in
and ofc, if i'm doing any more paint on this junk, i'm getting a spray station
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - Piggy - 12-09-2014
needs a wooden roof rack with fuel/rope etc, stack exhaust, big bull bar and a machine gun. nice.
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - John1.4 - 13-09-2014
dunno about the roof, but i could take out the back window and turn the back seat area into a turret deal...hmmm
RE: RE: Project Marvin - Yellow thing - PHEW wheels on - John1.4 - 18-09-2014
well sold the old wheels at the local car boot today - £10 well worth it
RE: Project Marvin - Yellow thing - John1.4 - 23-09-2014
well... washed the car today after chucking all the shit from the footwells into the boot,
still looks exactly as shit and dirty after a proper thorough clean so i call that a victory
RE: RE: Project Marvin - Yellow thing - John1.4 - 30-09-2014
got my exhaust back! the baffles in the old one had come loose (probably due to a less than thought through bwarp through the countryside involving some railway tracks and air) so it sounded rubbish,
old vs new
[attachment=19297]
it doesn't show it properly there, but it's not exactly a straight fit, the flange is at the wrong angle, so to get it to sit straight it has to be mounted a lot further over towards the suspension,
[attachment=19298]
that shows how much the backbox would have been wonky, so time to break out the hacksaw and 'modify' the hangers to fit
[attachment=19299]
et voila - they have been bent as well, but didnt get a pic beforehand
[attachment=19300]
aaaaand back to normal
thankyou sportex[attachment=19301]
RE: RE: Project Marvin - Yellow thing - Dum-Dum - 30-09-2014
How are you finding the sportex build quality wise, is the sportex baffled or straight through as I've been considering one
RE: RE: Project Marvin - Yellow thing - Matt - 30-09-2014
I'm guessing because he had to send it back because the baffles came loose, that it might have baffles
also as above, how do you rate them?