+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: 306 Repairs & Mods (https://www.306oc.co.uk/forum/forumdisplay.php?fid=22)
+--- Forum: Suspension, Transmission, Handling & Braking (https://www.306oc.co.uk/forum/forumdisplay.php?fid=19)
+--- Thread: Powerflex wishbone bushes...Email from Powerflex! (/showthread.php?tid=15901)
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 06-08-2013
(06-08-2013, 01:28 AM)miles Wrote: Std bush's flex less, even in the 205 world std OE bush's outlast any other and perform better. Never seen the appeal personally due to the few sets I remove
have you ever taken a second to look at a peugeot/citroen (any make/model) wishbone P bush?!?!
they practically fall apart from new!
seriously I think they used cheese...mainly due to the huge gaps.
My genuine Pbushes have never lasted longer than 6/7months.
polybush ftw
RE: Powerflex wishbone bushes...Email from Powerflex! - cwspellowe - 06-08-2013
(06-08-2013, 06:20 AM)Piggy Wrote:(06-08-2013, 01:28 AM)miles Wrote: Std bush's flex less, even in the 205 world std OE bush's outlast any other and perform better. Never seen the appeal personally due to the few sets I remove
have you ever taken a second to look at a peugeot/citroen (any make/model) wishbone P bush?!?!
they practically fall apart from new!
seriously I think they used cheese...mainly due to the huge gaps.
My genuine Pbushes have never lasted longer than 6/7months.
polybush ftw
Do you even know who Miles is? I'm sure he's seen more bushes than you've had hot dinners bud
If your "genuine" P-bushes are only lasting 6 months you're fitting them wrong. Pretty sure cars don't have failed bushes 6 months after leaving the production line...
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 06-08-2013
I do care for experience and knowledge but I would make a challenge for how many p bushes we have changed between us!!
They suck, seriously bad dood.
And yes,there was many people returning for their 6/12mth check ups with failed pbushes. should have been a recall IMO
RE: Powerflex wishbone bushes...Email from Powerflex! - cwspellowe - 06-08-2013
I've not come across one 306 yet that had to have p-bushes replaced in such a short space of time. People are tearing through OEM p-bushes because they're fitting them wrong and smashing them about with coilovers/silly lows and poor geometry.
I had Meyle HD ones and was thoroughly disappointed, I got three months out of them. Replaced them with OEM ones and they've been fine for a good two years now...
RE: Powerflex wishbone bushes...Email from Powerflex! - Rippthrough - 06-08-2013
I killed a set of genuine ones in less than 12 months, but I was driving like a complete arsehole 100% of the time down some gravel roads I found...
RE: Powerflex wishbone bushes...Email from Powerflex! - ConorTRG - 06-08-2013
Id agree on fitting the p bushes wrong especially on a car thats lowered a good bit, if there now fitted right they'll stress the bushing and eventually tear it.
Good to see powerflex sorting the other ones out though.
RE: Powerflex wishbone bushes...Email from Powerflex! - Just Sean - 07-08-2013
I've got some of these things bnib for sale...
RE: Powerflex wishbone bushes...Email from Powerflex! - lewisdmz - 08-08-2013
Good they've admitted to the problem and appear to be sorting it out, but how long have these things been available for? How can such a basic measurement be incorrect?
RE: Powerflex wishbone bushes...Email from Powerflex! - miles - 08-08-2013
Never had issues with OE one's, thats with track/Race use as well, Inc bending wheels going over the curb's, I do run VT ones on my own car now and any rally car as they seem to go on and on, Everything in perspective thou
I hear the black ones are a huge step in the right direction but a little to late for me
RE: Powerflex wishbone bushes...Email from Powerflex! - Atterz - 10-08-2013
Ive had 2 sets of these now and could never get them to work. The second set i got so frustrated with that i just threw them down the street. And i did email powerflex with no reply whatsoever.. This was just after buying the rallye. Waste of 60 quid to be fair!
RE: Powerflex wishbone bushes...Email from Powerflex! - Lolben91 - 12-08-2013
I had the same issue getting my arm bushes in!
Every time the pin was slid into the bushes they would come out from both sides, so after bending the cages out a bit and no luck there, i took a grinder to the pins are made them a bit narrower, after a lot more pushing, swearing etc they went in.
9 hours with a mate spent doing the bushes...
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 12-08-2013
FYi: a quick slice down each opposite length of the bush and they go in perfectly...
you dont want cut/grind the metal pin as that will wear away at the bush..the slices I made allow the bush to expand internally rather than externally
Re: Powerflex wishbone bushes...Email from Powerflex! - SKoob - 12-08-2013
Power flex emailed me to say my updated design bushes are in the post, just in time for me to swap over wishbones from the d turbo to the gti 6
will have to see if they fit properly this time
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 12-08-2013
yep.
They said mine are on the way too.
soon find out how good the new ones are.
if you want replacements just email them explaining why and they will send them out
RE: Powerflex wishbone bushes...Email from Powerflex! - puglove - 12-08-2013
pm me the email address then
RE: Powerflex wishbone bushes...Email from Powerflex! - Bender - 12-08-2013
Its all in the name, ie powerFLEX lol.
RE: Powerflex wishbone bushes...Email from Powerflex! - Atterz - 13-08-2013
Do they want proof of purchase because both pairs i bought were a couple of years back now. Id give the new ones a shot.
Re: Powerflex wishbone bushes...Email from Powerflex! - SKoob - 13-08-2013
Anyone tried these yet? I've not got round yo taking wishbone off yet so just wondering if they now actually fit?
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 14-08-2013
they have arrived.
quite a change to design inc metal inner edge.
will get pics up and how they fit tomorrow hopefully
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 15-08-2013
so heres the new bush design:
![[Image: 20130815_072318_zpsc3e4da87.jpg]](http://s92.photobucket.com/user/Piggy1987_2006/media/20130815_072318_zpsc3e4da87.jpg.html)
notice the metal inner edge?
also the mushroom hat part has a chamfered edge to help with fitting.
soon find out how well they fit!!
RE: Powerflex wishbone bushes...Email from Powerflex! - Rippthrough - 15-08-2013
And internal knurling, they are a far, far better design.
RE: Powerflex wishbone bushes...Email from Powerflex! - Connor - 15-08-2013
So we email them saying we have the old ones and they just send new ones?
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 15-08-2013
yup basically.
paul@powerflex.co.uk I believe
RE: Powerflex wishbone bushes...Email from Powerflex! - Jenkosowls - 18-08-2013
They actually look like the standard design bushes not something that looked like it might fit I still question how can something like this have gone un noticed in the design and testing stage (or lack if as it seems to be here) for such a long time
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 18-08-2013
coz it seems no one went to the effort I did to get it sorted....
rep me if you feel happy
RE: Powerflex wishbone bushes...Email from Powerflex! - cully - 04-04-2014
piggy have you got the partnumber for the newer bush's or is it the same as the old?
RE: Powerflex wishbone bushes...Email from Powerflex! - Piggy - 05-04-2014
I don't know buddy.
I'll pm you though...
RE: Powerflex wishbone bushes...Email from Powerflex! - pug306driver - 05-04-2014
very interesting and mental note taken.............very informative.
whats price difference between oe bushes ( voided one piece bushes with metal "outer"?? ) and the powerflex ones??
wheres best place for oe spares with parts exploded views and part numbers please?? mail order??
brilliant forum by the way