+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Project Truck Turbo MkII, gathering dust (/showthread.php?tid=13972)
RE: Project Truck Turbo MkII - 306GT30 - 28-05-2013
Living for the 6
RE: Project Truck Turbo MkII - Danny2009 - 28-05-2013
Liking the progress pal don't Hang about do you!
RE: Project Truck Turbo MkII - ozonehostile - 28-05-2013
Yeah haha, dead excited to see how an 11mm and gov mod transform the old girl, and with half the weight, bigger brakes and better suspension it should be pretty damn epic to drive, thinking of that is all the motivation I need to stay up a few days at a time working on it
Got shit to do after work today that will take up most of the evening annoyingly, but il be straight down the workshop after work 2moz
RE: Project Truck Turbo MkII - Danny2009 - 28-05-2013
Wish I had some of your enthusiasm! Might get down to my unit and get mine finished
It will go like a stabbed rat stripped out
RE: Project Truck Turbo MkII - ozonehostile - 28-05-2013
(28-05-2013, 04:50 PM)Danny2009 Wrote: Wish I had some of your enthusiasm! Might get down to my unit and get mine finished
It will go like a stabbed rat stripped out
its a shame your so far away mate, id happily come help you out if it wasn't 3 hours away
RE: Project Truck Turbo MkII - Danny2009 - 28-05-2013
Same here, I'm due a trip down your way but works a pita!
RE: Project Truck Turbo MkII - ozonehostile - 28-05-2013
(28-05-2013, 06:21 PM)Danny2009 Wrote: Same here, I'm due a trip down your way but works a pita!
let me know if your ever down my way, sure il be about as once this cars finished il be making a start on the sedan
RE: Project Truck Turbo MkII - Dicky - 28-05-2013
Looking good buddy, hereford isn't that far from me half tempted to take a drive up and give a helping hand.. even though I don't own a 306 anymore atleast I still throw coal out
RE: Project Truck Turbo MkII - ozonehostile - 28-05-2013
(28-05-2013, 10:44 PM)Dicky Wrote: Looking good buddy, hereford isn't that far from me half tempted to take a drive up and give a helping hand.. even though I don't own a 306 anymore atleast I still throw coal out
yeah, if you ever fancy a daytrip id be happy for some help, major jobs coming up soon are cambelt and timing up the new pump, engine out of the bianca, lowering the beam to compensate for how much weight ive stripped out. after that its just bolting on shinies and its ready to roll
RE: Project Truck Turbo MkII - Dicky - 28-05-2013
(28-05-2013, 10:49 PM)ozonehostile Wrote:Won't be this weekend as I'm working the doors, maybe next weekend I'll pop over and lend a hand(28-05-2013, 10:44 PM)Dicky Wrote: Looking good buddy, hereford isn't that far from me half tempted to take a drive up and give a helping hand.. even though I don't own a 306 anymore atleast I still throw coal out
yeah, if you ever fancy a daytrip id be happy for some help, major jobs coming up soon are cambelt and timing up the new pump, engine out of the bianca, lowering the beam to compensate for how much weight ive stripped out. after that its just bolting on shinies and its ready to roll
RE: Project Truck Turbo MkII - ozonehostile - 28-05-2013
(28-05-2013, 10:51 PM)Dicky Wrote:(28-05-2013, 10:49 PM)ozonehostile Wrote:Won't be this weekend as I'm working the doors, maybe next weekend I'll pop over and lend a hand(28-05-2013, 10:44 PM)Dicky Wrote: Looking good buddy, hereford isn't that far from me half tempted to take a drive up and give a helping hand.. even though I don't own a 306 anymore atleast I still throw coal out
yeah, if you ever fancy a daytrip id be happy for some help, major jobs coming up soon are cambelt and timing up the new pump, engine out of the bianca, lowering the beam to compensate for how much weight ive stripped out. after that its just bolting on shinies and its ready to roll
nice one dude, drop me a pm nearer the time if you fancy coming over
RE: Project Truck Turbo MkII - Danny2009 - 29-05-2013
I've got a mate in Monmouth and a mate in Chepstow so I'm always down your way ill all in next time
fond something to get stuck into
RE: Project Truck Turbo MkII - Dicky - 29-05-2013
OC gathering at ozones?
RE: Project Truck Turbo MkII - ozonehostile - 30-05-2013
Been down the workshop all evening again, not really got much done on the black car apart from getting the last few bits of sound deadening off, just been stripping the bianca.
should have the dashboard back in tommorrow with a non aircon heater unit and new heater matrix for that little bit more weight saving then Saturday im hoping to have it running
RE: Project Truck Turbo MkII - ozonehostile - 30-05-2013
Haven't really been feeling the motivation this week, just been doing little jobs like sorting out battery relocation and earth points. picking up a cambelt kit after work tomorrow then Pugmarshall is coming over on saturday to give me a hand
RE: Project Truck Turbo MkII - Piggy - 31-05-2013
looking good chap!
I need to take a week off work for mine I think....so many parts everywhere but no time to fit them all!!
RE: Project Truck Turbo MkII - ozonehostile - 31-05-2013
(31-05-2013, 07:17 AM)Piggy Wrote: looking good chap!
I need to take a week off work for mine I think....so many parts everywhere but no time to fit them all!!
I would loveto have some time off work to get mine finished but works too busy
RE: Project Truck Turbo MkII - ozonehostile - 01-06-2013
Had Pugmarshall over all day with me, got new cambelt and tensioners all on and the frankenpump, took far longer than any cambelt change ever ought to, too much talking haha.
nearly finished however we have an issue with the belt slowly moving itself off the pump wheel which will result in taking it off on sunday and trying to get it on perfectly straight that will hopefully solve the issue
Once the timimg belt is sorted and the new aux belt on, all thats missing is an oil line, after that its a case of filling it up with fluids and seeing if it runs
RE: Project Truck Turbo MkII - Jenkosowls - 01-06-2013
Have you put the bottom crank pulley on?
RE: Project Truck Turbo MkII - Chris_90 - 02-06-2013
(01-06-2013, 11:28 PM)Jenkosowls Wrote: Have you put the bottom crank pulley on?
I was gonna say that, when jenks did my pump change I didn't put the bottom pulley on right and the belt kept moving looking like it was coming off, when jenks put it on right it was fine, this is why I dint change cambelts
RE: Project Truck Turbo MkII - ozonehostile - 02-06-2013
the crank pulley seems to be on properly, Il check though
RE: Project Truck Turbo MkII - ozonehostile - 02-06-2013
All timed up and cambelt on straight, turned out to be the new tensioner wasn't sitting flush to the block.
started fitting the exhaust and taken a couple more bits off the white car, spent most of today driving and doing some wiring on Pugmarshalls 205 so not much else done.
Oil line should be sorted by wednesday or thursday, ordering parts on monday then its just a case of bolting the manifolds on properly with new studs (thanks to pugmarshall again) bolting turbo to exhaust and oil feed, radiator and electrics sorting, changing the sump then filling the engine up with fluids and itl be ready for first start
RE: Project Truck Turbo MkII - ozonehostile - 03-06-2013
Oil line ordered
RE: Project Truck Turbo MkII - silverzx - 03-06-2013
Dibs when you sell.
RE: Project Truck Turbo MkII - ozonehostile - 03-06-2013
(03-06-2013, 09:34 PM)silverzx Wrote: Dibs when you sell.
you have a long wait then....
RE: Project Truck Turbo MkII - ozonehostile - 04-06-2013
![[Image: IMAG0049_zps991ee05b.jpg]](http://i1310.photobucket.com/albums/s649/ozonehostile/IMAG0049_zps991ee05b.jpg)
Fresh from mocal, bought some heat shield too to stop the turbo cooking the line when Im stuck in traffic.
All I need to do now is get the old line off the block.......
RE: Project Truck Turbo MkII - Frosty - 04-06-2013
That's a sexy line. Did a company make that for you?
RE: Project Truck Turbo MkII - ozonehostile - 04-06-2013
(04-06-2013, 12:23 PM)Frosty Wrote: That's a sexy line. Did a company make that for you?
I went to quick Motorsport in hereford, ordered the fittings next day delivery from mocal then got them to press the ends in properly for me. I'm awaiting the Invoice to see what the damage to my bank balance is.
Project Truck Turbo MkII - Frosty - 04-06-2013
Ok mate be interested to know how much it cost cuz i will need to get 1 made up
RE: Project Truck Turbo MkII - ozonehostile - 04-06-2013
Yeah Il let you know, if you k.ow how long you need it and what ends you need Il be able to get it made properly for you.
I trust the people who built ken blocks fiesta to do an oil line for an xud haha