+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38)
+--- Forum: Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=39)
+--- Thread: chris_90 106 derv project xsi rep, turbo NAD ;) (/showthread.php?tid=13602)
RE: chris_90 106 derv project lots of New bits coming :) - Chris_90 - 16-05-2013
Bit of an update car went to garage this morning had new front pipe as the old one had a nice hole in. exhaust is now all sealed up, not sounding great tbh but i wasnt expect it to being a derv. Got the back box leveled up now so it dont hang to one side also wind deflectors come so go them straight on :-D
![[Image: 106green26_zpsb2f61b2b.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green26_zpsb2f61b2b.jpg.html)
![[Image: 106green27_zps80a2be70.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green27_zps80a2be70.jpg.html)
comments welcome :-D
RE: chris_90 106 derv project lots of New bits coming :) - Jimbo - 16-05-2013
Get a vid of how it sounds
RE: chris_90 106 derv project lots of New bits coming :) - ash23 - 16-05-2013
the exhaust looks better now its level :-)
get the back box cut open and take all the baffles out will sound better then mate.
RE: chris_90 106 derv project lots of New bits coming :) - Chris_90 - 16-05-2013
(16-05-2013, 10:22 AM)Jimbo Wrote: Get a vid of how it sounds
Will do when i get chance.
(16-05-2013, 10:29 AM)ash23 Wrote: the exhaust looks better now its level :-)
get the back box cut open and take all the baffles out will sound better then mate.
Defo does cable ties ftw
And i would like to do that but i dont want it to be to loud.... have to see how i get on with it 
RE: chris_90 106 derv project lots of New bits coming :) - Chris_90 - 21-05-2013
Bit of an update not much happening with this tbh fitted to clear indicators as mine were very old and frosted
![[Image: 106green29_zpsd611f113.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green29_zpsd611f113.jpg.html)
Also fitted the K&N filter that i had off the d turbo
![[Image: 106green28_zps9e97536a.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green28_zps9e97536a.jpg.html)
Thats about it, Did a run to Essex 315mile round trip yesterday and got 67.7 MPG well happy with that been getting around 52mpg around town, saving me a fair few quid compered to the old d turbo..... All tho im so bored of putting my foot down and going no were think about adding more fuel see if it makes any difference or not.
Comments welcome
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 29-05-2013
Bit of an updated, took k&n off as the noise got on my nerves and dropped the mpg, Today i got on with cutting the aches and fitting them will let the pics do the talking
![[Image: 106green30_zps4aba4ddf.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green30_zps4aba4ddf.jpg.html)
![[Image: 106green31_zps291f9b29.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green31_zps291f9b29.jpg.html)
![[Image: 106green32_zps6d11b0f8.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green32_zps6d11b0f8.jpg.html)
Was getting ready for rain as it went dark but it never came lol
![[Image: 106green33_zps5d25b131.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green33_zps5d25b131.jpg.html)
![[Image: 106green34_zpsd224638d.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green34_zpsd224638d.jpg.html)
![[Image: 106green35_zps7dbcc94e.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green35_zps7dbcc94e.jpg.html)
![[Image: 106green36_zpsc3a21955.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green36_zpsc3a21955.jpg.html)
![[Image: 106green37_zps2b5f9c88.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green37_zps2b5f9c88.jpg.html)
![[Image: 106green38_zps1ed8f16c.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green38_zps1ed8f16c.jpg.html)
So thats on just waiting for the tiger seal to dry, didnt use that much i screwed the kit on mainly just the front archs had most of the tiger seal on as there wasnt any were to screw them.
Bits waiting to go on are some brand new number plates
Lowering springs
Gloss black vynial for the roof
Powerflex lower engine mount
Need to save up and get rear lowered tempted to get a gti axle tho and swap them but not sure yet
Also if any one can help the car sits a good 10-15mm lower on the drivers side than the passenger side what could be causing this? worn shocks?
Comments welcome
Re: chris_90 106 derv project XSI arches now cut and on :) - Tyronnster - 29-05-2013
Sweet thought ur car had eyelashes on the arches lol
RE: chris_90 106 derv project XSI arches now cut and on :) - HDIkyle - 29-05-2013
Ruined
( Flat arches are far better
RE: chris_90 106 derv project XSI arches now cut and on :) - declantg - 29-05-2013
Complaining of mpg in a NAD
Is this toms 106? Haha
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 29-05-2013
(29-05-2013, 11:26 AM)declantg Wrote: Complaining of mpg in a NAD
Is this toms 106? Haha
LOL! no i said i took the K&N off because the mpg dropped its back to normal now 50mpg+ around town
(29-05-2013, 11:24 AM)Tyronnster Wrote: Sweet thought ur car had eyelashes on the arches lol
just the tape holding it in place till the tiger seal drys (29-05-2013, 11:26 AM)HDIkyle Wrote: Ruined
tbh i liked it as a flat arch and was gonna keep it a flat arch untill i removed one of the bump strips and it marked the paint worked and stood out a mile so decied to carry on with the xsi rep approach
RE: chris_90 106 derv project XSI arches now cut and on :) - ezb - 29-05-2013
looking cool as f*ck, now get it on its ring!
RE: chris_90 106 derv project XSI arches now cut and on :) - ginge191 - 29-05-2013
Those arches look smart!!! awesome work!!
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 29-05-2013
Thanks guys
needs lows measured it and the passenger side is 50mm higher!! Than drivers side so no idea what's going off there can any one shed some light on it??
RE: chris_90 106 derv project XSI arches now cut and on :) - samass - 29-05-2013
Probably just tired beam/springs. My old one used to do it. Lower it and it should be fine.
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 29-05-2013
(29-05-2013, 05:13 PM)samass Wrote: Probably just tired beam/springs. My old one used to do it. Lower it and it should be fine.
Oh hope it sorts it out once its lowered, Got some more pics now just put new plates on, can really see the difference in height
![[Image: 106green40_zps5136d31b.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green40_zps5136d31b.jpg.html)
![[Image: 106green41_zps60cbb71c.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green41_zps60cbb71c.jpg.html)
![[Image: 106green42_zps66225f3a.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green42_zps66225f3a.jpg.html)
![[Image: 106green43_zpsd7592642.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green43_zpsd7592642.jpg.html)
Just had a go on photo shop at lowering it
![[Image: 106green40photshoplowered_zpsb60e624f.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green40photshoplowered_zpsb60e624f.jpg.html)
Doubt it will be this low when i actually lower it but looks good i think
RE: chris_90 106 derv project XSI arches now cut and on :) - Dum-Dum - 29-05-2013
Needs a de-cat
![[Image: 106green35_zps7dbcc94e.jpg]](http://i552.photobucket.com/albums/jj332/mazda_323f/106green35_zps7dbcc94e.jpg)
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 29-05-2013
(29-05-2013, 07:24 PM)Dum-Dum Wrote: Needs a de-cat
RE: chris_90 106 derv project XSI arches now cut and on :) - Strikeforce - 29-05-2013
Arches look so much better
Starting to look good this now keep up the good work
RE: chris_90 106 derv project XSI arches now cut and on :) - 1616six - 29-05-2013
Once you get it lowered this will look epic. Honestly when you got it I had to lol that you flogged the hdi and ended up in this but now I love it, wouldn't mind it as a daily along side something fast!
RE: chris_90 106 derv project XSI arches now cut and on :) - samass - 29-05-2013
Hey man, these nads can be pretty rapid!
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 30-05-2013
(29-05-2013, 08:31 PM)JJ0063 Wrote: Once you get it lowered this will look epic. Honestly when you got it I had to lol that you flogged the hdi and ended up in this but now I love it, wouldn't mind it as a daily along side something fast!
Yer weren't great when i got it, think i made a bad move selling the hdi but i still stand by what i said it was boring to drive and really dont like electrics all over the engine, simple mechanical engine is the way forward
Also i wanted one of these before i bought the hdi so i got what i wanted. Would be great to have something rapid against the side of this because it would work as the money you save driving this 50+mpg mega cheap to insure etc etc hopefully once ive finished modding this will be able to save up to get something faster but will have to see how i get on with this, tbh surprised ive kept it this long (29-05-2013, 10:18 PM)samass Wrote: Hey man, these nads can be pretty rapid!
I wouldn't use rapid and nad in the same sentence
but they can move when ragging the fook out of them.
RE: chris_90 106 derv project XSI arches now cut and on :) - Midnightclub - 30-05-2013
his is boosted though
lol
RE: chris_90 106 derv project XSI arches now cut and on :) - Jenkosowls - 30-05-2013
yeah boosted and not shown it on here much!
Looking good chris!
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 30-05-2013
(30-05-2013, 09:05 AM)Midnightclub Wrote: his is boosted though
OOOOO tell me more need pics lol i been thinking about it on mine, but judging by his post on 106 moaners looking for an engine carnt be going well?
(30-05-2013, 09:18 AM)Jenkosowls Wrote: yeah boosted and not shown it on here much!
Looking good chris!
Thanks
One of the best pics of it so far this one with some affects of instergram
![[Image: 106green44_zps496c1823.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green44_zps496c1823.jpg.html)
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 31-05-2013
Not much of an update just put some polish over it
![[Image: 106green45_zpsfcdcc9b5.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green45_zpsfcdcc9b5.jpg.html)
![[Image: 106green46_zpsc9233cb6.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green46_zpsc9233cb6.jpg.html)
![[Image: 106green47_zps2e24a7ff.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green47_zps2e24a7ff.jpg.html)
![[Image: 106green48_zps68b7e7d8.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green48_zps68b7e7d8.jpg.html)
![[Image: 106green49_zps99f51b5a.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green49_zps99f51b5a.jpg.html)
![[Image: 106green50_zpsf140b5bd.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green50_zpsf140b5bd.jpg.html)
![[Image: 106green51_zpsfba8f0ea.jpg]](http://s552.photobucket.com/user/mazda_323f/media/106green51_zpsfba8f0ea.jpg.html)
Comments welcome
RE: chris_90 106 derv project XSI arches now cut and on :) - mr_fish - 31-05-2013
pretty smart
like you've said, bit lower to remove some wheel arch gap and your on to a winner
RE: chris_90 106 derv project XSI arches now cut and on :) - 306carter - 31-05-2013
Looks good man. Needs wing mirrors painting.
What's your plans for the interior?
RE: chris_90 106 derv project XSI arches now cut and on :) - Chris_90 - 31-05-2013
(31-05-2013, 02:58 PM)mr_fish Wrote: pretty smart
like you've said, bit lower to remove some wheel arch gap and your on to a winner
Thanks mate, yer once it's lower should look a load better
(31-05-2013, 08:31 PM)306carter Wrote: Looks good man. Needs wing mirrors painting.
What's your plans for the interior?
Looking for Xsi seats/door cards or s1 rallye seats don't really want gti half leathers as they cost to much for a mint set I would be worried about wearing them down or ripping them lol tbh not in a rush to sort them tho as focusing on the exterior at the min
RE: chris_90 106 derv project XSI arches now cut and on :) - Eeyore - 31-05-2013
looks tidy. Not really a fan of flat arches. Needs moar lows!
RE: chris_90 106 derv project XSI arches now cut and on :) - 306carter - 01-06-2013
(31-05-2013, 08:31 PM)306carter Wrote: Looks good man. Needs wing mirrors painting.
What's your plans for the interior?
Looking for Xsi seats/door cards or s1 rallye seats don't really want gti half leathers as they cost to much for a mint set I would be worried about wearing them down or ripping them lol tbh not in a rush to sort them tho as focusing on the exterior at the min
[/quote]
Good man, s2 dash is a cheap and easy upgrade. Also s2 door cards.
Will look loads better lowered.