+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: XUD Section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=11)
+--- Thread: TD04L (/showthread.php?tid=1322)
Re: TD04L - londondan86 - 20-02-2012
http://www.ebay.co.uk/itm/220953200548? ... 500wt_1413
Re: TD04L - Dave - 20-02-2012
Almost bid on that cos I could pick up, but will probably need a rebuild
Re: TD04L - londondan86 - 20-02-2012
Dave Wrote:Almost bid on that cos I could pick up, but will probably need a rebuild
I won it yesterday. Ill strip it down when it gets here, if play is really bad then ill order a rebuild kit, otherwise ill just bash it on. I recon everyone was put off by the 'tards red paint job!
Re: TD04L - studturbo - 20-02-2012
look at that red hahaha
Re: TD04L - Dave - 20-02-2012
Hahaha yeh that made me facepalm :p to be fair, rebuild kit on ebays like £35? so could have a mint turbo for £60...
Re: TD04L - londondan86 - 20-02-2012
Dave Wrote:Hahaha yeh that made me facepalm :p to be fair, rebuild kit on ebays like £35? so could have a mint turbo for £60...
Do you HAVE to get them balanced after a rebuild?
Re: TD04L - studturbo - 20-02-2012
http://www.ebay.co.uk/itm/Turbo-Rebuild ... 1c0e0d263e
rebuild kit
Re: TD04L - Dave - 20-02-2012
londondan86 Wrote:Dave Wrote:Hahaha yeh that made me facepalm :p to be fair, rebuild kit on ebays like £35? so could have a mint turbo for £60...
Do you HAVE to get them balanced after a rebuild?
Ofcourse not
Just make sure you clock the exhaust shaft and compressor wheel back to the same position. Had turbos apart and they have always gone back together fine, triple mark everything, and remember compressor wheel nut is clockwise to undo!
Re: TD04L - londondan86 - 20-02-2012
Dave Wrote:Ofcourse not
Just make sure you clock the exhaust shaft and compressor wheel back to the same position. Had turbos apart and they have always gone back together fine, triple mark everything, and remember compressor wheel nut is clockwise to undo!
Lovely! Was hoping you might say that!!!!!! Never had a turbo apart before so looking forward to getting stuck in. Cheers for the heads up on the right handed thread!
Re: TD04L - studturbo - 20-02-2012
Oh clockwise hmmm be rebuilding mine now then
Re: TD04L - Dave - 20-02-2012
http://www.scribd.com/livetildoa/d/3997 ... ild-Manual
You can thank me later
Re: TD04L - londondan86 - 20-02-2012
Dave Wrote:http://www.scribd.com/livetildoa/d/39979168-TD04L-Turbo-Rebuild-Manual
You can thank me later
Whoa!!! Major rep! Oh wait.......
Re: TD04L - studturbo - 20-02-2012
just had a good read and sounds straight forward
rebuild kit coming my way
Re: TD04L - londondan86 - 20-02-2012
studturbo Wrote:just had a good read and sounds straight forwardI will probs do it as well. There is some Chinese kits for £35 but there probably made of cheese!
Re: TD04L - studturbo - 20-02-2012
think ill be going for the i put up haha dont wont it failing
Re: TD04L - londondan86 - 25-02-2012
Turbo came this morning, its tiny!!! lol I just pictured it being a lot bigger than it actually is! Condition is spot on, no play in the shaft whatsoever, all the blades look good, very happy. The only thing is the CHRA Clamp is missing, I contacted the seller and he said that after it came off the scoopy he planned to use it on a ford so unclamped it but couldnt split it! So I told him to MTFU and try to find the clamp!
In case he doesnt find it, does anyone have a spare lying around for as cheap as poss!
![[Image: img20120225103716.jpg]](http://img217.imageshack.us/img217/4923/img20120225103716.jpg)
![[Image: img20120225103706.jpg]](http://img37.imageshack.us/img37/3459/img20120225103706.jpg)
![[Image: img20120225103730.jpg]](http://img714.imageshack.us/img714/690/img20120225103730.jpg)
Re: TD04L - Ruan - 28-02-2012
That looks absolutely tiddly, even for a 13t....
Re: TD04L - studturbo - 05-03-2012
Why does my TD04 look so much bigger than that
Re: TD04L - Ruan - 05-03-2012
I don't think that's a 13t....
That looks like a proper baby, that's definitely not a TD04L hotside anyway...
Re: TD04L - studturbo - 05-03-2012
Well my TD04L is alot bigger than that so looks like you have bin ripped off dan
Re: TD04L - londondan86 - 05-03-2012
I bloody hope not! Its defo the right comp housing. I'll measure up now
Re: TD04L - londondan86 - 05-03-2012
Right hopefully this makes sense! Compressor: Inducer 39.72mm Exducer 56.70mm Turbine: Inducer 41.15mm Exducer 46.12mm
Re: TD04L - Ruan - 06-03-2012
If those measurements are of your turbo, rather than just pulled from the internet, that is a TD04L-13T...
Re: TD04L - darrenjlobb - 06-03-2012
Just paste the serial number on the comp housing in here...theres loads of websites that translate it...
But should say td04L on the plate also..
Tbh it looks like one to me, there not very big...
Re: TD04L - londondan86 - 06-03-2012
darrenjlobb Wrote:Just paste the serial number on the comp housing in here...theres loads of websites that translate it...
But should say td04L on the plate also..
Tbh it looks like one to me, there not very big...
Cheers Darren! Feel a bit better now. Ive been googling the comp and turbine sizes and all seems to be spot on (excusing cheap ebay caliper!)
I took a photo of the plate. I did try googling this as well but ended up going in circles!
![[Image: img20120306154955.jpg]](http://img825.imageshack.us/img825/9923/img20120306154955.jpg)
Re: TD04L - mark_airey - 06-03-2012
this is what I found -
Mitsubishi - Subaru - IMPREZA FORESTER - EJ20(2.0) - TD04L-13G - 4937704100 - 14412AA140
Re: TD04L - londondan86 - 06-03-2012
mark_airey Wrote:this is what I found -
Mitsubishi - Subaru - IMPREZA FORESTER - EJ20(2.0) - TD04L-13G - 4937704100 - 14412AA140
OK. Wheres a bridge! lol
Cheers Mark, at least I can relax now and crack on de-reding the bloody thing!!!
Re: TD04L - strictly_perv - 29-03-2012
Has this thing been fitted yet?