![]() |
Puglove's onxy 'state, bye bye - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Puglove's onxy 'state, bye bye (/showthread.php?tid=13073) |
RE: Puglove's onxy 'state, (update beam wows) - puglove - 28-04-2013 Going to have the beam off and get some heat on it i think, to risky whilst its still attached IMO, especial as the areas that need heat are so close to the fuel tank & brake lines RE: Puglove's onxy 'state, (update beam wows) - Jonny81191 - 28-04-2013 Looks good mate, the rest of the lights need tinting though now. RE: Puglove's onxy 'state, (update beam wows) - puglove - 28-04-2013 (28-04-2013, 07:30 PM)Jonny81191 Wrote: Looks good mate, the rest of the lights need tinting though now. Na every other estate on this bloody forum has tinted lights, lol, and im not really a fan of tinted lights in genrel TBH, But i REALLY hated how they spoiled the window line with the pink bit on top so had to be done RE: Puglove's onxy 'state, (update beam wows) - Jonny81191 - 28-04-2013 Fair enough, each to their own I guess. RE: Puglove's onxy 'state, (update beam wows) - puglove - 28-04-2013 Indeed it is ![]() ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 05-05-2013 So today I got on and sorted out my exhaust, it look to have been repaired 4 or 5 times really REALLY shitty welds , what was left of the metal was paper thin all over with more holes than I can count, So yeah , Im a right tight arse and didn't want to splash on a new system so I cut up an old mid section & a few odd bits of pipe I had , a bit of fettling and a bit of welding later I had something that looked like this vvvvv . so I sprayed it all with some heat resistant fire place paint just to make it last a little longer RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - Just Sean - 05-05-2013 i like therear lights mate, looks good. Not long till you'll have a decat now lol... as soon as my 3inch system is made! RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 05-05-2013 I really need the Decat. still sooo quite RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - Just Sean - 05-05-2013 make me a 3" system while im out here, and when im back ill drive to yours and fit it and you can have the decat of me then! Will be quicker for you! PM me if you want.. ill pay for the materials ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 05-05-2013 I cant I havnt got any thing to mock it up on you dinlow lol RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - Just Sean - 05-05-2013 use your estate numnuts! Its the same design, just shorter! ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 05-05-2013 yeah but Kerry uses that every day for work so I cant keep taking it on and off to mock it up, would be a right pita, needs a bit of thought as well tbh, you putting a box init? RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - kingy - 05-05-2013 Looks good mate. Understand about being practical. Thats why I got a 525 touring. Not to sure on the wheels. RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - rd070707 - 05-05-2013 needs stance lol get ma wheels bought homie RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 11-05-2013 small update. Done the de cat today using what i had lying around. so just chopped the box out and welded a pipe in. and sprayed with heat resistant paint again. Also took the rest of the exhaust off and painted that up to give it abit of extra life. also it all looks REALLY tidy underneath all painted up RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 13-05-2013 Now remapped PRODanny ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - Birk - 13-05-2013 Race estate lmao I have two mapped hdi's, they are both crap lol Re: Puglove's onxy 'state, (update Exhuast 5/5/13) - rocker8742 - 13-05-2013 Now thicker tb's and coilies to sort the handling out? ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 13-05-2013 (13-05-2013, 08:44 AM)Birk Wrote: Race estate lmao one of those you had to be there jokes Dan (13-05-2013, 08:57 AM)rocker8742 Wrote: Now thicker tb's and coilies to sort the handling out? or just get the Gti T&T'd lol Re: RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - rocker8742 - 13-05-2013 (13-05-2013, 10:00 AM)puglove Wrote:(13-05-2013, 08:57 AM)rocker8742 Wrote: Now thicker tb's and coilies to sort the handling out? What you mean in the same way your.gonna fit the SC ? ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 13-05-2013 feck off! /prick ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 11-06-2013 About time I done a small update now its running again Sooo wind deflectors Xsara mist jets Drivers Vent adjustable boost gauge New fresh set of masks...... Just because I can lol And a quick whore ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - sam - 11-06-2013 Set of 0.05 3sdm's would look epic on that boyo ![]() Puglove's onxy 'state, (update Exhuast 5/5/13) - Alee83 - 11-06-2013 I think that looks mint on those rims...! Needs Aero wipers and tinted rear windows... One of the nicest freshest estates on the forum! ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - kingy - 11-06-2013 me likey but carnt help thinking either bigger wheels or spacers for the rear. just me. RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 11-06-2013 (11-06-2013, 07:40 PM)Alee83 Wrote: I think that looks mint on those rims...! Needs Aero wipers and tinted rear windows... One of the nicest freshest estates on the forum! Cheers dude. got loads of aero wipers hanging about just need to get around to it (11-06-2013, 07:41 PM)kingy Wrote: me likey but carnt help thinking either bigger wheels or spacers for the rear. just me. The wheels are 17s!!! 18s would just be silly, but hoping for banded steels and lows when I can afford it, Oh and I got JDM style camber on the beam that makes the arch gap look worse RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - kingy - 11-06-2013 Sell it me. RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 11-06-2013 uuhhhh no feck off MINE ![]() RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - Piggy - 12-06-2013 those 17s look spot on in the flesh....never seen decent 17s on a 306 before I think I be tempted to paint them satin black though! RE: Puglove's onxy 'state, (update Exhuast 5/5/13) - puglove - 12-06-2013 (12-06-2013, 06:01 AM)Piggy Wrote: those 17s look spot on in the flesh....never seen decent 17s on a 306 before Yeah i do like the wheels but they wont stay on this for ever and will end up on the 6 and im not a fan of black on diablo so they would have to stay silver. |