+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Cully's Bianca 6 R150 YVM (/showthread.php?tid=13188)
RE: Cully's Bianca 6 R150 YVM with added oil cooler - cully - 20-08-2014
Im liking them both but for different reasons
terrenis cause they look cool
pro3's cause they have epic tyres with a smaller tyre size which increases the acceleration pull
[attachment=18476]
[attachment=18477]
RE: Cully's Bianca 6 R150 YVM with more wheels - 1616six - 20-08-2014
Top ones look ten times better, the bottom look small & I dunno, just not right.
RE: Cully's Bianca 6 R150 YVM with more wheels - mr_fish - 20-08-2014
I like both, but sway towards the Pros for some reason.
Couple WIN sets of wheels though
RE: Cully's Bianca 6 R150 YVM with more wheels - jammapic - 20-08-2014
I'm a sucker for a 5 spoke...
RE: Cully's Bianca 6 R150 YVM with more wheels - Eeyore - 20-08-2014
As I said on facebook, speedlines ftw.
RE: Cully's Bianca 6 R150 YVM with more wheels - Kezzieboy - 20-08-2014
Both look sexy, but I've always loved Pro Race 3s
RE: Cully's Bianca 6 R150 YVM with more wheels - Dum-Dum - 20-08-2014
I prefer the look of the 5 spoke ones but they look too small. you need them in 16s to make them perfect.
RE: Cully's Bianca 6 R150 YVM with more wheels - cully - 13-09-2014
had an epic day today at castle combe
but i have a confession to make
il let the pictures do the talking
first lap on cold tyres into camp corner before the main straght!
[attachment=18966]
[attachment=18967]
[attachment=18968]
[attachment=18969]
[attachment=18970]
then we had a good lap on that corner
[attachment=18971]
then the third lap i guess the tyres were still not sticky enough!
[attachment=18972]
[attachment=18973]
[attachment=18974]
[attachment=18975]
RE: Cully's Bianca 6 R150 YVM with more wheels - cully - 13-09-2014
[attachment=18977]
[attachment=18978]
[attachment=18979]
then we had a few steady laps
[attachment=18980]
[attachment=18981]
RE: Cully's Bianca 6 R150 YVM with more wheels - cully - 13-09-2014
so that was the end of the first session
so i then reduced the front and rear tyre pressures to get some more heat into the tyres
so out to the second session
theis was a good run tyres heated up and were excellent
some pics into quarry
[attachment=18982]
[attachment=18983]
RE: Cully's Bianca 6 R150 YVM with more wheels - Niall - 13-09-2014
Oh how did i miss that! lol. Were lucky not to do any damage. Mind, was your splitter already fooked up like that?
RE: Cully's Bianca 6 R150 YVM with more wheels - cully - 13-09-2014
yes the splitter was already well twisted need to do away with it and find a genuine 6 one
RE: Cully's Bianca 6 R150 YVM with more wheels - Toms306 - 13-09-2014
Agree'd, 'guna splitters always look crap anyway.
What tyres were you on? I assume they're the track tyres if they needed to warm up?
RE: Cully's Bianca 6 R150 YVM with more wheels - cully - 13-09-2014
track was cold at 1030am tyres are yoko A048's
RE: Cully's Bianca 6 R150 YVM with more wheels - cully - 19-10-2014
bianca has thrown a hissy fit as ive got a new car!
she has decided to play up by breaking the window regulator system in the drivers door.
on investigating it it looks like the previous owner had grafted a non std part in there which I couldn't match for parts
so for the last week she has been living with wood chocking up the window
until I could visit Dangti6 to pick up a STD assembly to fit,
which i have now done
I must say the STD rivets that hold the motor is a pants idea but Rivnuts are a excellent invention which i highly recommend
need to get the window grommet to finish the job but it went back together well which makes a change
[attachment=19669]
RE: Cully's Bianca 6 R150 YVM - cully - 31-10-2014
got bored at home today so have had a go at destroying a throttle butterfly Rocker sold me
i roughed it out on a lathe at work a few weeks ago and today i attacked it with a flap wheel and dremmel need to enlarge the opening a little more then need to match the inlet plenum chamber
[attachment=19839]
Cully's Bianca 6 R150 YVM - rocker8742 - 31-10-2014
Looks a beauty there mate, fancy doing mine?
RE: Cully's Bianca 6 R150 YVM - Piggy - 01-11-2014
Wow I missed the offs. Camp is fricking quick corner too! Scareeeeeey!
RE: Cully's Bianca 6 R150 YVM - cully - 12-12-2014
Today was a bit of a milestone for the six
took her out for a run as shes been a bit neglected recently, since the purchase of the new daily
today we filled her with momentum99 and rinsed the whole tank!
no cobwebs left in the girl and she still maked me grin
she has hit 130000 today
bought her in april 2013 @ 122700miles
so ive done 7300 miles in 20 months of owning it, 1500 miles of that was the trip to the nurburg ring Germany
she has a lot going for her and has plenty more to give roll on the new year
[attachment=20647]
RE: Cully's Bianca 6 R150 YVM - cully - 22-12-2014
dirty girl
[attachment=20732]
to my clean Duo
[attachment=20733]
RE: Cully's Bianca 6 R150 YVM - lolsteve - 22-12-2014
YoloSwagNoRugrats
RE: Cully's Bianca 6 R150 YVM - 7057sam - 22-12-2014
Quietly steve
Did the spliter bent back ok ? Got many trackdays in mind for next year?another trip to the ring?
RE: Cully's Bianca 6 R150 YVM - cully - 22-12-2014
splitter has seen better days and being a gooner one it looks well sad on a six,
Im not going be going to the ring in 2015 as ive done that now, I maybe will go back at some point, but for 2015 we are taking a family holiday to the sun somewhere and maybe a few track days in this country
RE: Cully's Bianca 6 R150 YVM - cully - 23-02-2015
its the wifes birthday today so we booked a table for lunch in Lynton north Devon
so we filled the car with fuel
and rinsed 1/2 tank in 130 miles
had an epic trip and found wind rain snow and glorious sunshine
Bianca is very dirty now and will take a while to get back to clean
[attachment=21791]
[attachment=21792]
[attachment=21793]
[attachment=21794]
[attachment=21795]
RE: Cully's Bianca 6 R150 YVM - cully - 12-03-2015
have decided to show the car some love
so have decided to give the paintwork a bit of a birthday as it was looking a little grey
ive been down through the drivers side now with the buffer and polish and she is looking a lot better,
ive also removed the side stripes stripped them and re painted them so they look a lot fresher and arnt showing big flakes of missing paint,
just the top front back and the other side left to do
sorry for the crap pictures someones nicked my good camera from the drive!
[attachment=22148]
[attachment=22149]
RE: Cully's Bianca 6 R150 YVM - 7057sam - 12-03-2015
Looks really good mate
Is they any sounds or performance differents after you machined out the throttle body?
RE: Cully's Bianca 6 R150 YVM - cully - 13-03-2015
(12-03-2015, 09:50 PM)7057sam Wrote: Looks really good mate
Is they any sounds or performance differents after you machined out the throttle body?
umm
no cause ive not fitted it yet, should really do that
RE: Cully's Bianca 6 R150 YVM - Piggy - 13-03-2015
Is there any performance difference with the rebuilt shiney engine?....
That's also not fitted ;P
RE: Cully's Bianca 6 R150 YVM - cully - 13-03-2015
seems to be a pattern here
RE: Cully's Bianca 6 R150 YVM - cully - 11-04-2015
thought id bump my project thread up from the back pages with some clean shots as i took the camera out after the cleaning session for the FCS prim position thread
![[Image: DSCF2130.jpg]](http://smg.photobucket.com/user/cully/media/Bianca%202015/DSCF2130.jpg.html)
![[Image: DSCF2128.jpg]](http://smg.photobucket.com/user/cully/media/Bianca%202015/DSCF2128.jpg.html)
![[Image: DSCF2127.jpg]](http://smg.photobucket.com/user/cully/media/Bianca%202015/DSCF2127.jpg.html)
![[Image: DSCF2126.jpg]](http://smg.photobucket.com/user/cully/media/Bianca%202015/DSCF2126.jpg.html)
![[Image: DSCF2123.jpg]](http://smg.photobucket.com/user/cully/media/Bianca%202015/DSCF2123.jpg.html)