Rockers '6 - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Rockers '6 (/showthread.php?tid=33675) Pages:
1
2
|
Back in black - rocker8742 - 10-05-2016 Does this look right to you guys or am I missing something? This is with the wheel off the ground, when it was back down it was even further out Sent from my iPhone using Tapatalk Also had the bottom of the newish cat fell off And now the idle is bouncing between 900-1100 revs so figure it's getting some extra air in somewhere Sent from my iPhone using Tapatalk Back in black - rocker8742 - 24-05-2016 Had a look into the heating issue last night, I've found that the regulator in the pass. Footwell is plugged in, there are no blown fuses and there are no melted/corroded relays. I'm not 100% that the relays are in the correct slots or connected the right way round. Also had a look at the knocking I've got on the front. With the wheel off the ground there is quite a lot of left - right play but barely any up - down play. Is this likely to be a balljoint or something else? https://vimeo.com/167850968 Looked into the erratic idle but didn't find anything obviously wrong, tried running with the TPS, ICV, MAF and Lambda unplugged at separate times and disconnecting battery between each change with no difference. Need to get some carb/brake cleaner and spray around to see if there's an air leak. Also found the radio control stalk and alarm deactivate button tucked around the steering column so put those back in place Sent from my iPhone using Tapatalk RE: Back in black - Toms306 - 24-05-2016 Relays don't have to go in the right coloured plug, if your blower works, you have definitely got the relay in the right slot, if you want to know which it is, keep pulling relays and trying the blower until it doesn't come on, it's definitely not the orange or black (heated rear window and indicators), I'm pretty sure its the top brown relay in the green slot. Have you tried starting the engine with it on full cold? Weirdly mine stays cold for about 50% of journeys doing that, not perfect but it's a start lol. I'm at a loss with it now though but won't be looking any further into it so good luck with yours! Left and right movement I'd check the P bush and track rod end. Erratic idle is an odd one...I've never had a 306 idle as well as the current GTi6, despite all it's other faults. Can you tell if the throttle body has been off the manifold? If so it's likely the gasket between them was broken. It could also be the resonator under the manifold with a small leak which could eventually look like Mackat's one lol. RE: Back in black - powerandtorque - 24-05-2016 Left/right movement could be a failed inner tie rod joint or the O/S rack bush. My HDi has the same issue at the moment and it's one of those two on mine. RE: Back in black - Frosty - 24-05-2016 When I pop up Thursday we can try and find where the play is coming from as well if you want mate Back in black - rocker8742 - 25-05-2016 (24-05-2016, 09:11 PM)Frosty Wrote: When I pop up Thursday we can try and find where the play is coming from as well if you want mate That'd be great Matt, was gonna have a look tonight but now will be replacing the throttle cable that snapped this morning (24-05-2016, 08:24 AM)Toms306 Wrote: Relays don't have to go in the right coloured plug, if your blower works, you have definitely got the relay in the right slot, if you want to know which it is, keep pulling relays and trying the blower until it doesn't come on, it's definitely not the orange or black (heated rear window and indicators), I'm pretty sure its the top brown relay in the green slot. Have you tried starting the engine with it on full cold? Weirdly mine stays cold for about 50% of journeys doing that, not perfect but it's a start lol. I'm at a loss with it now though but won't be looking any further into it so good luck with yours! I need to spend a bit of time with a multimeter I think so I can see what's what. I'll give it a go starting on cold although in bit sure what that says, maybe the control for the flaps has packed up or they're wedged behind the dash. As for the erratic idle that will have to wait thanks to this bloody cable Back in black - rocker8742 - 30-05-2016 Right were getting there. Should be making a decent amount of progress this week before FCS Throttle cable is changed Front knocking is sorted Floor mats have been washed Suspensions been checked Abs sensors and ICV ordered To do list Fit ICV and ABS sensors Fix the constant heat or at least find a work around for it. Wash polish and wax I will take some pictures soon Sent from my iPhone using Tapatalk RE: Back in black - Eeyore - 30-05-2016 Toms306 also has the issue of constant heat RE: Back in black - Frosty - 31-05-2016 Good to hear it's getting there now mate Back in black - rocker8742 - 31-05-2016 (30-05-2016, 09:44 PM)Eeyore Wrote: Toms306 also has the issue of constant heat Yeah looks as though he's given up trying to find a fix though lol RE: Back in black - Toms306 - 31-05-2016 Sounds like something I'd do... Back in black - rocker8742 - 31-05-2016 if I find a fix will you keep it? Sent from my iPhone using Tapatalk RE: Back in black - Toms306 - 31-05-2016 Bit late... However the new owner will be interested in the fix! Back in black - rocker8742 - 14-06-2016 Well FCS came and went in a blur, but of a round up from the weekend I suppose Friday was spent making her shine Followed by me realising I need to buy a car cover because of all the birds at home GSF sent me the wrong parts surprise surprise, Cully was kind enough to lend me an ICV temporarily so fitted that Saturday morning and is running sweet again Had a very smooth drive to combe and spent some decent time on track Car felt absolutely great while I was out, track tyres and new suspension were working well. Had a nose around the trade stands and bought some more wheels for the Megane Car seemed pretty flawless all round really Sent from my iPhone using Tapatalk New wax lasting well after 500miles of abuse and not a single wash still beads well on a filthy car Sent from my iPhone using Tapatalk Back in black - rocker8742 - 14-06-2016 Video from on track: https://m.youtube.com/watch?feature=share&v=JEF0YA8dIb4 Sent from my iPhone using Tapatalk RE: Back in black - Piggy - 15-06-2016 Nice and smooth driving pal Back in black - rocker8742 - 15-06-2016 (15-06-2016, 06:26 AM)Piggy Wrote: Nice and smooth driving pal Thanks mate, definitely felt smoother and quicker than last time out Back in black - rocker8742 - 23-08-2016 Well not a lot has happened with this, got some pressed plates and a few other nice bits to fit when I get an afternoon free but other than that she's been driving with no issues Mot on Saturday flagged up a leaking shock so a nice easy fix for a 12 month ticket - happily surprised Sent from my iPhone using Tapatalk RE: Back in black - Frosty - 23-08-2016 Ideal good news on the mot RE: Back in black - Eeyore - 23-08-2016 Great to see it still going! RE: Back in black - MY95 - 23-08-2016 Car looks great! rallye blanks would finish the front of the car off IMO, do love a black GTI6. Back in black - rocker8742 - 23-08-2016 (23-08-2016, 08:56 AM)MY95 Wrote: Car looks great! rallye blanks would finish the front of the car off IMO, do love a black GTI6. Thanks guys, it's nice to have a car back that's reliable and good fun lol Never been a fan of rallye blanks but I have got something in store for the fogs in future (when I eventually get around to it) Anyone ever had rear Koni shocks rebuilt? Will be swapping to a spare set for the mot and then Hopefully getting the others rebuilt if I can find somewhere to do it for a decent price Still trying to find somewhere that I can store her over the winter as I'll be swapping back to a cheap daily again while I put some more effort into sorting it out Sent from my iPhone using Tapatalk Back in black - rocker8742 - 02-09-2016 Fresh 12 month ticket as of yesterday couple of minor advisories which will be sorted soon enough Next week will be cleaning up ready for forge action day on Saturday so will have some good pics hopefully Sent from my iPhone using Tapatalk Rockers '6 - rocker8742 - 13-09-2016 Few pictures after polish and wax ready for forge action day last weekend. Got some pressed plates to fit and looking to change out all the bulbs where possible to LED versions soon Also looking to update some of the main power and earth wiring as I'm noticing a lot of dimming lights etc at the minute Sent from my iPhone using Tapatalk RE: Rockers '6 - Eeyore - 13-09-2016 oshhh looks shiny! looks like it was a wet day at combe! Rockers '6 - rocker8742 - 13-09-2016 It was wet for most of the day, dried up nicely by the end of the afternoon though Glad I wasnt on track lol Sent from my iPhone using Tapatalk Rockers '6 - rocker8742 - 18-11-2017 Wow not updated for a year, not alots changed Since the last update it's had some partner p bushes and power flex bushes, got an upper strut brace but not yet fitted it Gave it a service yesterday and tracked down the knocking noise I've had start recently Baker BM top engine mount has split in 2, spoke to them yesterday and they sent me out another one which is a revised design which arrived today, very impressed with the service Hopefully get some more work on it started soon Sent from my iPhone using Tapatalk |