+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Marky Mark's Astor 6 (/showthread.php?tid=29576)
RE: Marky Mark's Astor 6 - mackat - 16-03-2015
(13-03-2015, 08:27 PM)7057sam Wrote: What did you use to polish it with?? looks very dark,almost black which is weird
Yeah my beams had alot of upgrade but is seized and dreading the day we have to rebuild it
Some silver polish, gotta be the mood lighting in the front room:
[attachment=22225]
Marky Mark's Astor 6 - PocketFighter - 16-03-2015
Gonna have to drop by, been meaning to... But have had my own little beast I've been sorting out [attachment=22226]
RE: Marky Mark's Astor 6 - 7057sam - 16-03-2015
On my rallye I tryed alot to polish my cylinder head in match my cam covers,done by hand aswell would sit and do for a 1 so at the weekends
You can also polish your top mounts aswell,they come up really well.
[attachment=22229][attachment=22230]
RE: Marky Mark's Astor 6 - mackat - 17-03-2015
(16-03-2015, 10:28 PM)PocketFighter Wrote: Gonna have to drop by, been meaning to... But have had my own little beast I've been sorting out
Nice..! Always kicked myself for not learning when I had the chance. Think it's outta the question now..too old!
(16-03-2015, 10:45 PM)7057sam Wrote: On my rallye I tryed alot to polish my cylinder head in match my cam covers,done by hand aswell would sit and do for a 1 so at the weekends
You can also polish your top mounts aswell,they come up really well.
Looking good!
haha.. stop putting ideas in my head! :p
RE: Marky Mark's Astor 6 - 7057sam - 17-03-2015
(17-03-2015, 08:37 PM)mackat Wrote:(16-03-2015, 10:28 PM)PocketFighter Wrote: Gonna have to drop by, been meaning to... But have had my own little beast I've been sorting out
Nice..! Always kicked myself for not learning when I had the chance. Think it's outta the question now..too old!
(16-03-2015, 10:45 PM)7057sam Wrote: On my rallye I tryed alot to polish my cylinder head in match my cam covers,done by hand aswell would sit and do for a 1 so at the weekends
You can also polish your top mounts aswell,they come up really well.
Looking good!
haha.. stop putting ideas in my head! :p
Nice and easy though essentially a free mod
just lots of elbow grease
RE: Marky Mark's Astor 6 - PocketFighter - 17-03-2015
(17-03-2015, 08:37 PM)mackat Wrote:Never too old mate, if you're about this Saturday I'll bring her over if you want to have a look at her! Or could bring the road bike if you want to have a spin lol(16-03-2015, 10:28 PM)PocketFighter Wrote: Gonna have to drop by, been meaning to... But have had my own little beast I've been sorting out
Nice..! Always kicked myself for not learning when I had the chance. Think it's outta the question now..too old!
(16-03-2015, 10:45 PM)7057sam Wrote: On my rallye I tryed alot to polish my cylinder head in match my cam covers,done by hand aswell would sit and do for a 1 so at the weekends
You can also polish your top mounts aswell,they come up really well.
Looking good!
haha.. stop putting ideas in my head! [emoji14]
RE: Marky Mark's Astor 6 - mackat - 20-03-2015
(17-03-2015, 09:41 PM)PocketFighter Wrote:(17-03-2015, 08:37 PM)mackat Wrote:Never too old mate, if you're about this Saturday I'll bring her over if you want to have a look at her! Or could bring the road bike if you want to have a spin lol(16-03-2015, 10:28 PM)PocketFighter Wrote: Gonna have to drop by, been meaning to... But have had my own little beast I've been sorting out
Nice..! Always kicked myself for not learning when I had the chance. Think it's outta the question now..too old!
(16-03-2015, 10:45 PM)7057sam Wrote: On my rallye I tryed alot to polish my cylinder head in match my cam covers,done by hand aswell would sit and do for a 1 so at the weekends
You can also polish your top mounts aswell,they come up really well.
Looking good!
haha.. stop putting ideas in my head! [emoji14]
By the looks of things I'm working this Saturday
but will be around on the Sunday if you wanna drop by.
Aha.. after a leisurely drive to Reading and back (plus a big thanks to Paul_13) picked up some yummy speedlines!
hehe...
[attachment=22272]
RE: Marky Mark's Astor 6 - Paul_13 - 20-03-2015
Looking goooooood!
RE: Marky Mark's Astor 6 - mackat - 20-03-2015
hehe.. can't wait to the cars sitting on them properly
Ohhh and the injectors are back, although not 100% sure about the caps, but i've now spoken with 3 companies about them and all have come back saying single holed caps.
The injectors have a fantastic spray patten with single caps, plus if they had dual holed caps which angle would they have to be aligned to as when I pulled them out of the TB they where pointing in all different directions?
Maybe I'm over thinking this??
[attachment=22273]
[attachment=22274]
RE: Marky Mark's Astor 6 - Paul_13 - 20-03-2015
They're not right! Every single 6 injector I've seen has a 2 hole caps
RE: Marky Mark's Astor 6 - 7057sam - 20-03-2015
Speedline look lovely mate
How much you got to do before it's road worthy? ?
RE: Marky Mark's Astor 6 - mackat - 20-03-2015
That's what i've seen too, but do people actually align them up when put back in? ..and if so which way do they position the V pattern?
I'm a slow coach with not enough time on my hands as I work alot.. The car has been sitting on the drive since 24th Dec, and the engine since end of Jan.
I have a couple of weeks off in May where by then I'd like to finish and have it running on the road properly.
RE: Marky Mark's Astor 6 - RetroPug - 21-03-2015
![[Image: r1fxnk.jpg]](http://i60.tinypic.com/r1fxnk.jpg)
I've been told the orientation doesn't matter. The correct caps look like that though.
Also, make sure the mating surfaces are absolutely squeaky clean and put the manifold back on with the correct torque as you can warp them and stop them sealing quite easily.
RE: Marky Mark's Astor 6 - mackat - 04-04-2015
Thanks RetroPug - seems a little odd that the injectors caps don't need alinement. Wouldn't the fuel atomise at a different rate?
So finally managed to get some time off work with the weather on my side:
[attachment=22489]
[attachment=22490]
Old and new - Yay.. next part!
[attachment=22491]
Looks like i've got a small leak from the brake fluid res. Might have been caused by me moving the car around a lot, but there doesn't appear to be an O-ring or flange keeping the res snug - Should there be?
[attachment=22492]
Couple of rusty parts which will have to be replaced
[attachment=22493]
[attachment=22494]
Again shouldn't there be some sort of retainer or flange on the gear shift?
[attachment=22496]
Sooo much gunk on the wishbones
[attachment=22495]
Random question, how do you take this part off
[attachment=22497]
Annnnd last one, BUGGER!!!
Best way of getting a snapped screw out?
[attachment=22498]
RE: Marky Mark's Astor 6 - Niall - 04-04-2015
Disc retaining screw, just drill/snap the head off and don't bother with them. They are only there to hold the disc on whilst you have the wheel off
The fake fuel filler cap, prise it off with a small flat head then there is a scre under there holding the cap on.
The gear shift ball joint is normal. The linkages hold it in place although you may want to replace the bronze bush the ball sits in. Remind me next week when I'm home and I'll find the correct dimensions for the new one for you
Brake fluid leak, bet that's fresh from where you have knocked the MC. If it was old, the powder coating would of bubbled. Wouldn't worry but keep an eye on the levels when it's back on the road.
Don't worry about the rust on the subframe mounts. It's not going anywhere but if you want to tart them up, get the bolts soaking now as they do seize up!!
RE: Marky Mark's Astor 6 - mackat - 04-04-2015
Thanks Niall - Hope you managed to have a good weeks sun by the pool!?!
It's bubbling slightly and when I cleaned it paint just wiped off - not the best of photos:
[attachment=22500]
[attachment=22499]
Not too much tarting up needed under the gunk, just a good-old wipe down with degreaser
RE: Marky Mark's Astor 6 - Ben_w - 05-04-2015
ignore me, niall already replied....
RE: Marky Mark's Astor 6 - Toms306 - 05-04-2015
The injector orientation doesn't matter as its not direct injection, the fuel is squirted towards the back of the valve and sucked into the cylinder when the valve opens.
As for the fake filler, the black strip comes off and its screwed underneath iirc, its the real filler you need to remove the liner for.
RE: Marky Mark's Astor 6 - mackat - 05-04-2015
No worries Ben
Thanks Tom!
Not much done today - tooo much chocolate munching!
Although quick question: what tool do people use to take the air-con piping off. By the looks of it, the spring needs to be pushed over the connector:
[attachment=22513]
RE: Marky Mark's Astor 6 - mackat - 06-04-2015
Slow poke am I
Enjoying the sun too much while taking the loom and gearbox off
[attachment=22521]
Fair amount of carp on the gearbox, tried Gunk engine cleaner - but not rating it much
[attachment=22522]
[attachment=22523]
RE: Marky Mark's Astor 6 - mackat - 11-04-2015
Another nice day and time to get my hands dirty!
I can confirm Gunk Ultra Degreaser is sh!t..!
Whole bottle and two jet washes later -->>
[attachment=22620]
Resorted to brake cleaner and a wire brush
[attachment=22621]
and to finish it off silver hammerite
[attachment=22622]
RE: Marky Mark's Astor 6 - Niall - 11-04-2015
Looking good man. They are a bastard to clean up and believe me, do not stay clean for that long! lol
RE: Marky Mark's Astor 6 - mackat - 11-04-2015
(11-04-2015, 04:53 PM)Niall Wrote: Looking good man. They are a bastard to clean up and believe me, do not stay clean for that long! lol
Thanking you good sir!
I'm knackered from cleaning it and have given up for the day. Tomorrow if the weather holds it's, cleaning the loom, engine bay and if i have time, trying to de-rust a couple of spots.
RE: Marky Mark's Astor 6 - Toms306 - 11-04-2015
(05-04-2015, 07:45 PM)mackat Wrote: Although quick question: what tool do people use to take the air-con piping off.
Hacksaw...
RE: Marky Mark's Astor 6 - mackat - 12-04-2015
(11-04-2015, 05:16 PM)Toms306 Wrote:(05-04-2015, 07:45 PM)mackat Wrote: Although quick question: what tool do people use to take the air-con piping off.
Hacksaw...
NOOoooooo...! :p
Have decided to keep the aircon for the time being, and since everyone is taking them out of theirs I should be able to get the piping..
RE: Marky Mark's Astor 6 - Niall - 12-04-2015
Its the piping that stops these systems from working. It rots where the brackets hold the pipes to the crossmember. You can however pick up brand new pipes on eBay for not a lot if you keep an eye out
RE: Marky Mark's Astor 6 - Toms306 - 12-04-2015
Lol, you asked how other people remove them, not how they should be removed!
As Niall says though, the pipes along the front crossmember tend to be damaged in one way or another, can almost guarantee you won't find a decent one 2nd hand...I haven't seen a good one at all for 5 years lol....that was about 10 306s ago...
RE: Marky Mark's Astor 6 - PocketFighter - 12-04-2015
Looking good mate
RE: Marky Mark's Astor 6 - mackat - 13-04-2015
Thanks for the feedback chaps
Managed to clean up the loom and connectors, re-tape the ends too.
If I wanted to bin the aircon, is it just a case of pulling everything out, but can I leave the compressor connected up to the engine?
Also will I have any warning lights?
RE: Marky Mark's Astor 6 - Niall - 13-04-2015
Yep rip all the pipework out, bin it and either leave the compressor on or fit a Rallye aux belt set up