+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: General (https://www.306oc.co.uk/forum/forumdisplay.php?fid=6)
+--- Forum: The Couch (https://www.306oc.co.uk/forum/forumdisplay.php?fid=7)
+--- Thread: Halfords socket sets (/showthread.php?tid=27993)
Pages:
1
2
RE: Halfords socket sets - Ruan - 01-12-2014
Main thing that winds me up about Halfords tools is the usual
9mm
10mm
12mm
13mm
14mm
17mm
21mm
Where the feck are the ones inbetween!!! I'd rather buy multiple sets which have everything in tbh, then I can go "I want the half inch 13mm socket", to which I open my half inch set and go straight in, rather than rooting about, finding that the set has random sizes for some not others etc... That's probably me being a bit OCD mind!
Not to mention that the 7mm spanner is possibly the most useful spanner ever and it's never bloody included!!!
RE: Halfords socket sets - Eeyore - 01-12-2014
Think the more modern sets have many more sizes...
RE: Halfords socket sets - Toms306 - 01-12-2014
200pc has all consecutive sockets.
No 7mm spanner, but I've never needed one tbh lol.
Halfords socket sets - DavidA - 01-12-2014
I thought that the professional sets were made by one of the bigger names anyway...
RE: Halfords socket sets - Ruan - 01-12-2014
(01-12-2014, 06:02 PM)Toms306 Wrote: 200pc has all consecutive sockets.
No 7mm spanner, but I've never needed one tbh lol.
You mean you've never had an awkward to access jubilee clip?!
RE: Halfords socket sets - bigcheez2k3 - 02-12-2014
(01-12-2014, 11:45 PM)Ruan Wrote:(01-12-2014, 06:02 PM)Toms306 Wrote: 200pc has all consecutive sockets.
No 7mm spanner, but I've never needed one tbh lol.
You mean you've never had an awkward to access jubilee clip?!
Standard turbo on XUD, small silicone piece from turbo inlet to standard piping. That was a bastard to do from the drivers wheel well.
EDIT: Wait...that was a 7mm socket. Ignore me.
RE: Halfords socket sets - Toms306 - 02-12-2014
(01-12-2014, 11:45 PM)Ruan Wrote:(01-12-2014, 06:02 PM)Toms306 Wrote: 200pc has all consecutive sockets.
No 7mm spanner, but I've never needed one tbh lol.
You mean you've never had an awkward to access jubilee clip?!
Nope... I find jubilees tend to put on in a way that they can come off again! How would the last person fit it otherwise lol? There are short and deep 7mm sockets for the small ratchet or screwdriver handle which have been good enough so far... And I've stripped a few complete 306s with this kit lol.
RE: Halfords socket sets - Paul_13 - 02-12-2014
The original set was the best. Every size that should of been in the box. Not like the new ones which infuriate me
RE: Halfords socket sets - Toms306 - 02-12-2014
I really don't see what they're missing lol?
What's in the box:
◾ 1/4" Drive
◾ 11 - Metric Sockets: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
◾ 10 - SAE Sockets: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2"
◾ 6 - Metric Deep Sockets: 4, 5, 6, 7, 8, 9mm
◾ 1 - Bit Adaptor
◾ 1 - Wobble Extension Bar - 100mm
◾ 1 - 1/4” Drive Ratchet Handle
◾ 1 - Spinner Handle
◾ 1 - Universal Joint
◾ 3/8" Drive
◾ 18 - Metric Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm
◾ 10 - SAE Sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4", 13/16, 7/8"
◾ 10 - Deep Metric Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm
◾ 8 - E-Torx Sockets: 8, 10, 11, 12, 14, 16, 18, 20mm
◾ 24 - Phillips Bit Socket: #1, #2, #3; Pozi Bit Socket: #1, #2, #3
◾ Slotted Bit Socket: 4, 5.5. 6.5mm
◾ Hex Bit Sockets 3, 4, 5, 6, 8, 10mm
◾ Torx Bit Socket 10, 20, 27, 30, 40
◾ Tamper Torx Bit Sockets 45, 50, 55, 60
◾ 2 - Spark Plug Sockets 10, 14mm
◾ 2 - Wobble Extension Bar - 75 & 150mm
◾ 1 - Breaker Bar – 8"
◾ 1 - Universal Joint
◾ 1 - 3/8" Drive Ratchet Handle
◾ 1/2" Drive
◾ 12 - Metric Sockets: 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm
◾ 4 - SAE Sockets: 15/16, 1, 1-1/16, 1-1/4"
◾ 9 - Deep Metric Sockets: 15, 16, 17, 18, 19, 20, 21, 22, 24mm
◾ 7 - Metric Impact Sockets: 13, 14, 15, 17, 19, 21, 23mm
◾ 1 - Wobble Extension Bar - 125mm
◾ 1 - 1/2" Drive Ratchet Handle
◾ 1 - Universal Joint
◾ 1 - 1/4"F x 3/8"M Adaptor
◾ 1 - 3/8"F x 1/4"M Adaptor
◾ 1 – 3/8"F X 1/2"M Adaptor
◾ 1 – 1/2"F X 3/8"M Adaptor
◾ 30 – 1/4 Shank Bits in Box
◾ 12 – Ratcheting Spanner: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm
◾ 10 – Metric Short Arm Hex Key with holder
Only other sockets/spanners I've needed are more specialist like brake pipe spanner or hub nut socket.
RE: Halfords socket sets - nominous - 02-12-2014
That's certainly a bloody good start for someone with nothing.
I've also got one of the through hole kits. The annoying kit that you cannot get extra bits for as it's non standard connections.
it's extremely handy for things like adjusting boschs where you have a screw to hold and lock nut. But a spanner can be difficult to get into position.
RE: Halfords socket sets - RetroPug - 03-12-2014
I've a TorQ set which I believe is a B&Q brand, fantastic range, every size I've ever needed on a 306 inc. impact sockets for wheel nuts, etc.
Nothing's ever broken, one ratchet seized after my friend left it in water but after soaking in WD40 for a few weeks it has been working flawlessly ever since.
Not sure of cost as it was a gift but it has been fantastic for the last 3 years or so.
RE: Halfords socket sets - Ruan - 03-12-2014
(02-12-2014, 10:15 AM)Toms306 Wrote:(01-12-2014, 11:45 PM)Ruan Wrote:(01-12-2014, 06:02 PM)Toms306 Wrote: 200pc has all consecutive sockets.
No 7mm spanner, but I've never needed one tbh lol.
You mean you've never had an awkward to access jubilee clip?!
Nope... I find jubilees tend to put on in a way that they can come off again! How would the last person fit it otherwise lol? There are short and deep 7mm sockets for the small ratchet or screwdriver handle which have been good enough so far... And I've stripped a few complete 306s with this kit lol.
Before the car was made and it was put on in the factory!!!
Classic one for that is the water distribution block on all XU engines, they put the clips on in the most retarded position.
But yeah, I know I can pick up another socket for a few quid, but you haven't got anywhere to put it! I'd much rather full sets of each, but that's just me probably!
Halfords socket sets - j-n-88 - 03-12-2014
Great sets! Had mine a couple of years and never had any problems.
Halfords socket sets - Frosty - 03-12-2014
The 200pc has gone back to £150
RE: Halfords socket sets - silverzx - 03-12-2014
(03-12-2014, 01:19 PM)Frosty Wrote: The 200pc has gone back to £150
I got mine!
RE: Halfords socket sets - Toms306 - 03-12-2014
(03-12-2014, 10:24 AM)Ruan Wrote:(02-12-2014, 10:15 AM)Toms306 Wrote:(01-12-2014, 11:45 PM)Ruan Wrote: You mean you've never had an awkward to access jubilee clip?!
Nope... I find jubilees tend to put on in a way that they can come off again! How would the last person fit it otherwise lol? There are short and deep 7mm sockets for the small ratchet or screwdriver handle which have been good enough so far... And I've stripped a few complete 306s with this kit lol.
Before the car was made and it was put on in the factory!!!
Classic one for that is the water distribution block on all XU engines, they put the clips on in the most retarded position.
But yeah, I know I can pick up another socket for a few quid, but you haven't got anywhere to put it! I'd much rather full sets of each, but that's just me probably!
Good point lol. But if its so inaccessible that the small 7mm socket on ratchet or driver handle can't do it, I don't see that a spanner would.
I never really use the other sets I have now. I do wish there was a couple of 'man' tools in with the kit though. Pliers/side cutters/hammer/chisel/etc. But for sockets, spanners and bits I really haven't needed any extra since getting the 200pc kit.
RE: Halfords socket sets - Pgtips - 03-12-2014
(03-12-2014, 01:19 PM)Frosty Wrote: The 200pc has gone back to £150
But £124.99 if you've got a trade card
RE: Halfords socket sets - MCH - 03-12-2014
(02-12-2014, 11:02 AM)nominous Wrote: I've also got one of the through hole kits. The annoying kit that you cannot get extra bits for as it's non standard connections.
it's extremely handy for things like adjusting boschs where you have a screw to hold and lock nut. But a spanner can be difficult to get into position.
got a link to that kit? sounds like it might be handy
RE: Halfords socket sets - mackat - 03-12-2014
The only thing missing would be a torque ratchet - but since this is my first proper socket set I'm well chuffed
Heres the link: http://www.halfords.com/motoring/garage-equipment/socket-sets/halfords-advanced-professional-200-piece-socket-and-ratchet-spanner-set
and yeah, gone up to £150
RE: Halfords socket sets - ADV_93 - 03-12-2014
Once put a 3/4 inch impact gun onto a 19mm chrome vanadium 1/2 inch with an adapter and the socket took everything i threw at it...
RE: Halfords socket sets - MCH - 04-12-2014
(03-12-2014, 11:58 PM)ADV_93 Wrote: Once put a 3/4 inch impact gun onto a 19mm chrome vanadium 1/2 inch with an adapter and the socket took everything i threw at it...
My dad put one of his 17 Snap-On deepreach sockets (non-impact) onto my 18v Snap-On impact gun and it cracked it right down the side...
Snap-on did replace it, but that's not the point, if you were mid job and didn't have another that's game over...
RE: Halfords socket sets - nominous - 05-12-2014
(03-12-2014, 10:22 PM)MCH Wrote: got a link to that kit? sounds like it might be handy
This is the closest:
http://www.halfords.com/motoring/garage-equipment/socket-sets/halfords-advanced-professional-30-piece-metric-vortex-socket-set-1-4-3-8
My set is only the one ratchet and it came with more ratchet ring spanners.
it's several years old so they probs don't sell mine any more. It was about 40 rather than 60 too.
it was a quick thought to teh mrs for getting me something at xmas. Turned out really handy
RE: Halfords socket sets - MCH - 06-12-2014
(05-12-2014, 11:03 AM)nominous Wrote:(03-12-2014, 10:22 PM)MCH Wrote: got a link to that kit? sounds like it might be handy
This is the closest:
http://www.halfords.com/motoring/garage-equipment/socket-sets/halfords-advanced-professional-30-piece-metric-vortex-socket-set-1-4-3-8
My set is only the one ratchet and it came with more ratchet ring spanners.
it's several years old so they probs don't sell mine any more. It was about 40 rather than 60 too.
it was a quick thought to teh mrs for getting me something at xmas. Turned out really handy
thought it might of been that one, looks very useful!
RE: Halfords socket sets - Pgtips - 08-12-2014
170 piece on offer now for £100 but ends at midnight
http://www.halfords.com/motoring/garage-equipment/socket-sets/halfords-advanced-professional-170-piece-socket-ratchet-spanner-set
RE: Halfords socket sets - Toms306 - 08-12-2014
Tbh theres a few important bits missing from the 170, I'd pay the extra for the 200.