+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Misc & Wanted (https://www.306oc.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wanted: hubcentric spacers sorted ..need some bolts now....shallwo headed and standard (/showthread.php?tid=22480)
Pages:
1
2
RE: 10mm or 15mm hubcentric spacers - Piggy - 02-04-2014
(02-04-2014, 04:44 PM)karl1989 Wrote: 2 or 4 spacers? Pm me your number I'll txt you when I'm at unit tomorrow and see if I can find all the bolts. Open to offers on spacers and bolts
PM'd
(02-04-2014, 08:17 PM)Jaymes306 Wrote: Ive got a pair of new 12mm hubcentric's
PM'd
RE: 10mm or 15mm hubcentric spacers AND BOLTS - Piggy - 05-04-2014
Bump
RE: 10mm or 15mm hubcentric spacers AND BOLTS - Piggy - 13-04-2014
Bump...
Anyone supply 10mm hubcentrics for less than £30 posted, then you can have my money.
I can get them new for that...so I aint paying £40+postage for second hand ones!!
RE: 10mm or 15mm hubcentric spacers AND BOLTS - Kezzieboy - 13-04-2014
Got some 15mm ones, might have some long tapered bolts and adapters depending on how much you'd like to spend :-P
RE: 10mm or 15mm hubcentric spacers AND BOLTS - Piggy - 13-04-2014
Nah, need 10mm 100% now, as got a set of genuine style long bolts sorted I think
Thanks though
RE: 10mm or 15mm hubcentric spacers AND BOLTS - Piggy - 15-04-2014
Bump
RE: 10mm hubcentric spacers - Piggy - 16-04-2014
Daily bump... Need some asap as wheels nearly ready
RE: 10mm hubcentric spacers - Piggy - 17-04-2014
Or a full set of 15mm with/without bolts...
Consider anything now, so long as you can get it to me by next thursday!!
RE: 10mm hubcentric spacers or 15mm...need a set asap - Piggy - 18-04-2014
Bump again!!
My poor winter tyres are getting shredded
RE: 10mm hubcentric spacers or 15mm...need a set asap - Piggy - 19-04-2014
Weekend bump
RE: 10mm hubcentric spacers or 15mm...need a set asap - Piggy - 21-04-2014
No one??
May even consider 20mm if you had a set inc bolts??
RE: 10mm hubcentric spacers or 15mm...need a set asap - Piggy - 22-04-2014
Commited to two sales...
Then at last minute both sellers dropped out...
Anyone?
RE: 10mm hubcentric spacers or 15mm...need a set asap - WiNgNuTz - 22-04-2014
Ive got a pair of 20mm spacers, but no bolts with them i'm afraid. Any good to you?
RE: 10mm hubcentric spacers or 15mm...need a set asap - Piggy - 22-04-2014
How much pal? Posted of course
(Assume they hubcentric)
RE: 10mm hubcentric spacers or 15mm...need a set asap - Piggy - 22-04-2014
Sorted...thanks lads....
Anyone got 8x 55mm or 60mm wheel bolts?
RE: hubcentric spacers sorted ..need a set of 8 LONG WHEEL BOLTS now!!! - Mattcheese31 - 22-04-2014
http://www.ebay.co.uk/itm/M12-x-1-25-45mm-PEUGEOT-GENUINE-ALLOY-WHEEL-FLAT-SEAT-EXTENDED-SPACER-BOLT-C4-C5/130934801845?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222003%26algo%3DSIC.FIT%26ao%3D1%26asc%3D20140122125356%26meid%3D6390805447442352678%26pid%3D100005%26prg%3D20140122125356%26rk%3D4%26rkt%3D6%26sd%3D130879268570&rt=nc
RE: hubcentric spacers sorted ..need a set of 8 LONG WHEEL BOLTS now!!! - Piggy - 22-04-2014
yes matt, I can use ebay too.
But 45mm is waaaaaaay too short AND at £3 a bolt, I would rather take a bolt up the gearbox than pay £24 for 8 bolts!!!!!!
looks like I need a set (8) of the shallow headed tapered bolts and a set (8) of cyclone flat seated standard length now anyway....
RE: hubcentric spacers sorted ..need a set of 8 LONG WHEEL BOLTS now!!! - Mattcheese31 - 22-04-2014
(22-04-2014, 08:25 PM)Piggy Wrote: yes matt, I can use ebay too.
But 45mm is waaaaaaay too short AND at £3 a bolt, I would rather take a bolt up the gearbox than pay £24 for 8 bolts!!!!!!
looks like I need a set (8) of the shallow headed tapered bolts and a set (8) of cyclone flat seated standard length now anyway....
says they're for standard wheels with 10mm spacers . .my bad
RE: hubcentric spacers sorted ..need a set of 8 LONG WHEEL BOLTS now!!! - Mattcheese31 - 22-04-2014
just buy them, because if i see one more thread about spacers i'm just gonna lump you with the ban hammer anyway . .
RE: hubcentric spacers sorted ..need a set of 8 LONG WHEEL BOLTS now!!! - Piggy - 22-04-2014
dude, its doing my head in....hence I just sent loadsa cash to two members on here and paid a specialist guy for 16 tapered to flat seated conversion washer......
I was all sorted till Wingnutz PM'd me and said they were the bolt on spacer type
wish I had just bought cyclones now
RE: hubcentric spacers sorted ..need some bolts now....shallwo headed and standard - Mattcheese31 - 22-04-2014
(22-04-2014, 09:05 PM)Piggy Wrote: dude, its doing my head in....hence I just sent loadsa cash to two members on here and paid a specialist guy for 16 tapered to flat seated conversion washer......
I was all sorted till Wingnutz PM'd me and said they were the bolt on spacer type
wish I had just bought cyclones now
i'm having a similar problem but i think i'm just gonna bite the bullet tbh, too much faffing is doing my head in . .
RE: hubcentric spacers sorted ..need some bolts now....shallwo headed and standard - Danny2009 - 22-04-2014
(22-04-2014, 11:04 PM)Mattcheese31 Wrote:(22-04-2014, 09:05 PM)Piggy Wrote: dude, its doing my head in....hence I just sent loadsa cash to two members on here and paid a specialist guy for 16 tapered to flat seated conversion washer......
I was all sorted till Wingnutz PM'd me and said they were the bolt on spacer type
wish I had just bought cyclones now
i'm having a similar problem but i think i'm just gonna sell them Danny tbh, too much faffing is doing my head in . .
Edit
I may have 8 flat wheel bolts mate not sure deffo got a full set but not splitting
RE: hubcentric spacers sorted ..need some bolts now....shallwo headed and standard - Mattcheese31 - 22-04-2014
(22-04-2014, 11:10 PM)Danny2009 Wrote:(22-04-2014, 11:04 PM)Mattcheese31 Wrote:(22-04-2014, 09:05 PM)Piggy Wrote: dude, its doing my head in....hence I just sent loadsa cash to two members on here and paid a specialist guy for 16 tapered to flat seated conversion washer......
I was all sorted till Wingnutz PM'd me and said they were the bolt on spacer type
wish I had just bought cyclones now
i'm having a similar problem but i think i'm just gonna sell them Danny tbh, too much faffing is doing my head in . .
Edit
I may have 8 flat wheel bolts mate not sure deffo got a full set but not splitting
haha nice edit . . . .i have actually got one set sorted mate, getting there . .
RE: hubcentric spacers sorted ..need some bolts now....shallwo headed and standard - Piggy - 23-04-2014
HEEEEEEEEEEY!
WHO CHANGED MY UNDERNAME NICKNAME?
RE: hubcentric spacers sorted ..need some bolts now....shallwo headed and standard - Danny2009 - 23-04-2014
Lmfao!