Needed a little run around - Printable Version

Needed a little run around - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Needed a little run around (/showthread.php?tid=2087)

Pages: 1 2

Re: Needed a little run around - mooey65 - 30-05-2012

Had my first go at wrapping tonight its not as easy as it seems

[Image: IMAG0488.jpg]

RE: Needed a little run around - mooey65 - 02-10-2012

Iv not updated this for a few months.

New CV joints fitted.
I got a second front strut bar fitted now a long with a few stickers on the underside of my bonnet. I also have some refurbished alloys with new T1rs on Smile

New gearknob fitted.
Wiring harness for my HID's.
LED rear light blubs the crap and have been sent back.
Fitted a new alloy radiator with silicone hoses, K&N panel filter and a grounding kit.

[Image: IMAG0695.jpg]

This is how crap them bulbs are
http://www.youtube.com/watch?feature=player_embedded&v=wpGjY0jpOQs

Iv been told my engine bay looks like a Noddy car.

[Image: IMAG0731.jpg]

New NGK Laser Platinum plugs then had the car on the rollers and.....

176.5bhp @6900rpm
168.1ft-lbs@3200rpm
[Image: 331607_10152010113815335_1182703831_o.jpg]

[Image: 331607_10152010113815335_1182703831_o.jpg]

http://www.youtube.com/watch?v=hnK2-gffxYY&feature=relmfu
Not at all bad for a 16 year old 2.0 N/A car.

RE: Needed a little run around - JackLewis_Dturbo - 02-10-2012

surely a dturbo would make more sense lol

RE: Needed a little run around - Arron - 03-10-2012

So what are these standard... good line

RE: Needed a little run around - mooey65 - 04-10-2012

(02-10-2012, 05:42 PM)JackLewis_Dturbo Wrote: surely a dturbo would make more sense lol

More sense how lol

(03-10-2012, 06:25 AM)Arron Wrote: So what are these standard... good line

168bhp and around 137 lb-ft at new

RE: Needed a little run around - C.A.R. - 04-10-2012

These are lovely cars and pretty-much bulletproof. What's the situation with the 'Beams' red-top engine that the Gen6 guys always used to harp on about? Tweaked timing? Or different cylinder head altogether? And what figures are on those engines?

Much more reliable than the Gen7 which replaced it in my opinion. My syncro was f*cked between 2/3/4 gears for starters, and then there was that expensive-sounding tick from the engine when cold...

RE: Needed a little run around - mooey65 - 04-10-2012

(04-10-2012, 09:58 AM)c.a.r. Wrote: These are lovely cars and pretty-much bulletproof. What's the situation with the 'Beams' red-top engine that the Gen6 guys always used to harp on about? Tweaked timing? Or different cylinder head altogether? And what figures are on those engines?

Much more reliable than the Gen7 which replaced it in my opinion. My syncro was f*cked between 2/3/4 gears for starters, and then there was that expensive-sounding tick from the engine when cold...

Yamaha beams engine has more power the out put is 200-220bhp ish and has VVTI not worth the £1500 most want for the engines alone.

Power deck spacer coming soon I will be happy if I can get this engine up to around 185bhp but there is not much that can be done.

RE: Needed a little run around - mooey65 - 05-12-2012

well iv fitted my spacer and had it on a dyno

186.3 bhp @ 7116rpm

[Image: IMG_3257.jpg]

RE: Needed a little run around - mooey65 - 15-01-2013

Back up for sale

RE: Needed a little run around - mooey65 - 01-02-2013

Looks like am keeping it market is crap for theses car so am thinking a tracking it.

http://www.youtube.com/watch?v=LjeYaw_TqhU&list=UUJWiMi3L8_VFRjsAnw_DQ0w&index=1