+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: karl1989 black ph1 boost bus roof opinions (/showthread.php?tid=16681)
RE: karl1989 black ph1 boost bus - Piggy - 26-08-2013
with yellow fogs, you need the yellow lensed S16 twin optic lights I have for sale
![[Image: 20130609_181717_zps2672fa74.jpg]](http://i92.photobucket.com/albums/l22/Piggy1987_2006/20130609_181717_zps2672fa74.jpg)
RE: karl1989 black ph1 boost bus - karl1989 - 26-08-2013
What are the brackets like? How much are they?
RE: karl1989 black ph1 boost bus - Piggy - 26-08-2013
yhpm
karl1989 black ph1 boost bus - Sambarker - 27-08-2013
I've got some of those yellow twin optics spare
karl1989 black ph1 boost bus - karl1989 - 27-08-2013
May be breaking this now. Went to jack the ph1 up on the rear on the jacking point and the jacking point bent. So side skirt of and abit of tapping around and pulling brought this. Haven't tried rest if sill yet. Should I break or keep?
RE: karl1989 black ph1 boost bus WITH ROT :( - Piggy - 27-08-2013
if thats only place on whole car...keep it.
I dont think you will find a phase1 now without rust somewhere.
check from chassis legs.
front floorpan
rear arches.
if they all fine. just repair what you've found
front not from
RE: karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 27-08-2013
Rear arches are solid
Re: karl1989 black ph1 boost bus WITH ROT :( - Tyronnster - 27-08-2013
Gutted for ya
RE: karl1989 black ph1 boost bus WITH ROT :( - Piggy - 27-08-2013
(27-08-2013, 10:02 PM)Tyronnster Wrote: Gutted for ya
Its only in one place!
an hours work with a plate, welder and some underseal and it be fine!!!
If the rear arches are solid, and the front chassis rails too, I would be fixing it for sure!!
RE: karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 28-08-2013
There is a hole at re front on drivers side. Look at pictures on first page
RE: karl1989 black ph1 boost bus WITH ROT :( - Jonny81191 - 28-08-2013
Fix it. This is going to be more commonplace now, and if people just break or scrap at the first signs of rust, there's going to be a point where they become super rare. As piggy said, it's not all that hard to fix, underseal while you're at it.
RE: karl1989 black ph1 boost bus WITH ROT :( - 306Dan - 28-08-2013
Just get a mig out and some plate and fix it, couple of hours work on both the sill and the front and you'll be right
RE: karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 28-08-2013
Took the old man up to see sill he said he seen a lot worse and it's repairable. Going to drop tank and get a new sill and sort it
. Ph win project is back on 
RE: karl1989 black ph1 boost bus WITH ROT :( - 306Dan - 28-08-2013
glad to here it
RE: karl1989 black ph1 boost bus WITH ROT :( - Jonny81191 - 28-08-2013
Good lad!
Have fun welding upside down!
RE: karl1989 black ph1 boost bus WITH ROT :( - ozonehostile - 29-08-2013
same place as the rust on my rallye. also looking forward to welding it lol
karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 01-09-2013
Well got some bits to make it a proper ph1
thanks to danny and Jenk. Bumper, grill, bonnet, s16 steering wheel and boot plastics Front bumper just pushed on for now
RE: karl1989 black ph1 boost bus WITH ROT :( - Danny2009 - 01-09-2013
Looks better already!
RE: karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 08-09-2013
Got a few more bits cheers to Sam. Black bonnet, grill, morettes and wind deflectors. Will get pics later when fitted
karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 14-09-2013
Few bits lve got done wile trying to sort out the other . Have got to pull my finger out now as I need to get this ready
RE: karl1989 black ph1 boost bus WITH ROT :( - Piggy - 14-09-2013
you wrapping the roof?? if so, what with?
RE: karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 14-09-2013
Ye mate. Carbon
karl1989 black ph1 boost bus WITH ROT :( - Alee83 - 15-09-2013
Looking much better already Karl...!
karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 26-09-2013
Car is now in for welding. Been in since this afternoon so should be done tomorrow. Tank is out so and rear is ready to be welded up
. Few pics of course Front inner wheel arch
Finished
RE: karl1989 black ph1 boost bus WITH ROT :( - devils_fuel - 26-09-2013
Good job done mate bet your very happy
I need to find a good but cheaper welder in Bristol
RE: karl1989 black ph1 boost bus WITH ROT :( - Danny2009 - 26-09-2013
well done for saving it lad looks like a top quality repair
RE: karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 26-09-2013
Ye I'm glad cheers guys
. Hard finding a cheap welder especially a good one
RE: karl1989 black ph1 boost bus WITH ROT :( - martyn92 - 26-09-2013
Thats a really good repair
RE: karl1989 black ph1 boost bus WITH ROT :( - karl1989 - 26-09-2013
I'm really happy with it. Will upload more pics of the rest jacking points tomorrow
RE: karl1989 black ph1 boost bus WITH ROT :( - Jenkosowls - 26-09-2013
Get some stone chip on it ASAP will save a hell of allot of greif in the future. When's the plan for this to be on the road?