306 Estate Edenpark - Printable Version

306 Estate Edenpark - Printable Version

+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: 306 Estate Edenpark (/showthread.php?tid=10955)

Pages: 1 2 3

RE: 306 Estate Edenpark - Hdisw - 21-02-2013

yup m8 i think some of them are already members here, but i will invite more of them to join this forum.

Re: 306 Estate Edenpark - Seid' - 22-02-2013

Hi dude.

Waiting to see that sw ready to roll Big Grin

RE: 306 Estate Edenpark - Hdisw - 22-02-2013

it will be running soon, i hope in the beggining of march to be ready to roll !

RE: 306 Estate Edenpark - devils_fuel - 22-02-2013

(16-02-2013, 09:17 PM)Hdisw Wrote:

headrests look like rugby or American balls lol

RE: 306 Estate Edenpark - Ruan - 22-02-2013

(21-02-2013, 09:56 PM)Connor Wrote: Nice state and I LOVE those headrests

And lol@all the people shocked at the diesel cooler... They come standard on bigger pugs

All HDis have Diesel coolers!

RE: 306 Estate Edenpark - Hdisw - 22-02-2013

(22-02-2013, 12:28 PM)devils_fuel Wrote:
(16-02-2013, 09:17 PM)Hdisw Wrote:

headrests look like rugby or American balls lol

race spec seats lol

what about my floor mats ? original ones, blue ones with edenpark logo ahah

this logos came in the front doors Rofl

RE: 306 Estate Edenpark - lolsteve - 22-02-2013

(21-02-2013, 09:56 PM)Connor Wrote: Nice state and I LOVE those headrests

And lol@all the people shocked at the diesel cooler... They come standard on bigger pugs

Not shocked at there being a diesel cooler, just said haven't seen an aftermarket one on before and was wondering why he was adding one on
I guess in my mind it might have been acting similar to the intercooler allowing denser fuel to flow therefore increased bang for buck? or could be on the wrong page in a different book

RE: 306 Estate Edenpark - Hdisw - 03-03-2013

tomorrow i'll go to the mechanic to see how it's going and i'll take some pictures to update the thread Wink

RE: 306 Estate Edenpark - Pugmarshall - 05-03-2013

Looks like you've got some good plans Big Grin

Btw the standard coolers are under the car, so if you don't know you're clearly not man enough.

RE: 306 Estate Edenpark - Poodle - 05-03-2013

We know where the standard ones go, but what's the point of an after-market one? I don't imagine they can hold 1350bar of pressure, so pre-hp pump seems logical. Fuel will already be slightly heated by the lp pump and, as Steve said, cooler = denser. Was just wondering if it'd be worth it tbh, particularly if it's going to replace the standard item...

RE: 306 Estate Edenpark - Hdisw - 18-03-2013

maybe wednesday it will be ready to roll finally !

RE: 306 Estate Edenpark - Seid' - 18-03-2013

go for it dude Big Grin

RE: 306 Estate Edenpark - Hdisw - 20-03-2013

[Image: img0051ax.jpg]

RE: 306 Estate Edenpark - Piggy - 20-03-2013

do the hdi's have to be removed for turbo replacement?!

I thought it was a rock n roll procedure like the xud?

RE: 306 Estate Edenpark - Hdisw - 22-03-2013

the turbo is placed behind/under the engine and it's hard to reach there .. in my case it was better to get the engine out because i had some other parts to be taken care of.

RE: 306 Estate Edenpark - Hdisw - 22-03-2013

[Image: fotografia0912.jpg]

286k km

RE: 306 Estate Edenpark - Hdisw - 27-03-2013

more of the same !

[Image: fotografia0916.jpg]

RE: 306 Estate Edenpark - Hdisw - 31-03-2013

Fitting test of the exhaust header/turbo

[Image: img0098qn.jpg]

RE: 306 Estate Edenpark - Seid' - 01-04-2013

near to the end Big Grin

RE: 306 Estate Edenpark - Hdisw - 25-06-2013

Well long time no updates !

Here's some:

The 1756VK almost done and installed.

[Image: img0159ds.jpg]

Engine back to his place.

[Image: fotografia0927.jpg]

Covered by dust Big Grin

The oil cooler isn't going to be installed there, it was just a test to see where's the best place to put it, that's not good indeed. lol

[Image: fotografia0943.jpg]

Oil temperature and turbo pressure gauges.

[Image: fotografia0944.jpg]

RE: 306 Estate Edenpark - Birk - 25-06-2013

What power are you expecting ?

RE: 306 Estate Edenpark - Hdisw - 25-06-2013

170hp and 400nm i guess Big Grin

RE: 306 Estate Edenpark - Midnightclub - 25-06-2013

Can't help but think that power is going to be wasted through those skinny 14s lol

RE: 306 Estate Edenpark - Hdisw - 25-06-2013

i know m8, i wanted to change it first, suspension and brakes aswell but this turbo shaite came along and ...

for now it will get the H&R springs 40mm and when i have a chance i'll get the 195/55/R15 (i'm thinking something different from the usual cyclone, etc ...) and the upgrade to 283mm or 288mm.

RE: 306 Estate Edenpark - Poodle - 26-06-2013

Really glad to see this project is still going, making good progress too. The compressor outlet on the turbo looks like it points straight at the chassis rail, how are you routing the intercooler piping?

RE: 306 Estate Edenpark - Hdisw - 26-06-2013

Poodle, yep it's still going but taking too long. lol

The compressor outlet was modified of course, i'm not sure how are they routing the piping ..

I was going to see how things are going yesterday but i didn't had the chance, maybe today i'll pass by and take some photos if there's something new to show ...

RE: 306 Estate Edenpark - Poodle - 26-06-2013

Hahaha i know the feeling mate, mine's taken 3 years so far. Rolleyes

Fair enough, i'd be interested to know how they've done it. Hope you manage to get more pictures soon, like this project a lot.

RE: 306 Estate Edenpark - Hdisw - 26-06-2013

And now i'm driving a skoda fabia 1.4 TDI estate 09' daily ... not the same feeling as the 306 .. lol the only one i have fun is with my partner 1.6 HDi 2012, of course, it's a PUG. Big Grin

But i'll take some photos with all the details i can get.

Hug.

RE: 306 Estate Edenpark - Hdisw - 09-10-2013

Just to say that this estate isn't dead !

It's taking a while because i had some problems with the mechanic who was doing this, he wouldn't finish it, kept saying that he didn't had the time and bla bla bla ...

So i decided to change it to another mechanic and i'm waiting for my "turn" now.

RE: 306 Estate Edenpark - Scott - 09-10-2013

That's good to hear, I really like this project!