![]() |
Rockers '6 Is back - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20) +--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3) +--- Thread: Rockers '6 Is back (/showthread.php?tid=4282) |
RE: Rockers '6 Whoops - cully - 09-08-2014 Good work Tom ![]() Rockers '6 Whoops - rocker8742 - 09-08-2014 Thanks mate RE: Rockers '6 Whoops - Toms306 - 09-08-2014 You'll wish you changed the gear oil seals while it was out of the car lol.... So much more difficult in situ! But I'm glad you got it sorted and back on the road, nice one! ![]() Rockers '6 Whoops - rocker8742 - 09-08-2014 Lol I bet it will be mate Failed the mot this morning, needs a new balljoint, new cv boot, and handbrake needs adjusting Also got brake load sensing valve seized what's the best way of sorting this out? RE: Rockers '6 Almost back on the road - cully - 09-08-2014 plus gas or wd40 the pivot pin and work it in til it frees up this is a common issue ![]() Rockers '6 Almost back on the road - rocker8742 - 09-08-2014 That's alright then ![]() ![]() RE: Rockers '6 Almost back on the road - Frosty - 10-08-2014 This is the brake load valve and the pivot pin is above where I'm pointing. Its pretty oblivious when you look at it in person ![]() Rockers '6 Is back - rocker8742 - 23-08-2014 Got a full 12 months on her as of today RE: Rockers '6 Is back - mr_fish - 26-08-2014 Finally! Plenty of Bwaaappp now? Rockers '6 Is back - rocker8742 - 26-08-2014 Only been out with it once but it's nice to have the bwarp back RE: Rockers '6 Is back - ozonehostile - 26-08-2014 Nice one dude, bet you're kind of glad it blew up now giving you the opportunity for so many new bits at once haha Rockers '6 Is back - rocker8742 - 26-08-2014 You could say that haha been an experience at least RE: Rockers '6 Is back - Dum-Dum - 26-08-2014 Good to hear she's back on the road. Rockers '6 Is back - rocker8742 - 28-09-2014 Great. Just f*cking great. ![]() And no that's not my house Re: RE: Rockers '6 Is back - kentiiboii - 28-09-2014 (10-08-2014, 11:07 AM)Frosty Wrote: This is the brake load valve and the pivot pin is above where I'm pointing. Its pretty oblivious when you look at it in person Mine doesn't look like that, mines a r reg 6. (28-09-2014, 09:58 PM)rocker8742 Wrote: Great. Just f*cking great. You broke down? Rockers '6 Is back - rocker8742 - 28-09-2014 Mine did, and yep you guessed it ![]() Re: Rockers '6 Is back - kentiiboii - 29-09-2014 What happened? RE: Rockers '6 Is back - Matt-Rallye - 29-09-2014 Please do not say engine issues again dude :/ RE: Rockers '6 Is back - Eeyore - 29-09-2014 blahhh what is with this car. What happened? Rockers '6 Is back - rocker8742 - 29-09-2014 Engine issues again Was driving perfectly fine pulling well, went over a couple of speedbumps (not for the first time that night and the same ones) cruised along 3/4 mile at 25 ish up the road went to put my foot down and wouldn't pull at all Pulled up and it's hunting between 800 - 1k revs sounds like one of the cylinders has an issue doesn't appear to be any obvious air leaks Tried unplugging the lambda which made no difference Not too sure why it would suddenly drop off like that unless something's come unplugged ![]() Found that unplugged but can't find anywhere that it'd plug in RE: Rockers '6 Is back - osm2121 - 14-10-2014 That plug, I´ve seen thousands of people asking where the f@ck it goes, and answer is also the same, has no where to be plugged! Thats what i´ve found almost everywhere. Mine has that plug hanging there also. Might be for heated throttle body? One question, im very interested in some things you have for sale, but cant post there, neither send mp. Can I just ask you here? To make things easier, i´d them to be shipped to Uruguay (of course is on me), but maybe you dont ship. Thanks RE: Rockers '6 Is back - Niall - 14-10-2014 Not sure if you have got this running properly yet but if not, start it up, get it to idle then unplug a coil at a time with it running. If you unplug one of them and it doesn't make any difference to how the car runs, that coil is dead ![]() Rockers '6 Is back - rocker8742 - 14-10-2014 (14-10-2014, 08:49 PM)Niall Wrote: Not sure if you have got this running properly yet but if not, start it up, get it to idle then unplug a coil at a time with it running. If you unplug one of them and it doesn't make any difference to how the car runs, that coil is dead Did manage to sort it in the end mate the MAP sensor was faulty, swapped it with another I had and its back running smoothly again ![]() (14-10-2014, 08:45 PM)osm2121 Wrote: That plug, I´ve seen thousands of people asking where the f@ck it goes, and answer is also the same, has no where to be plugged! Thats what i´ve found almost everywhere. Mine has that plug hanging there also. Might be for heated throttle body? What bits were you after? Wouldn't have a clue how much it would cost to ship anything out there though RE: Rockers '6 Is back - osm2121 - 14-10-2014 (14-10-2014, 10:05 PM)rocker8742 Wrote: What bits were you after? Wouldn't have a clue how much it would cost to ship anything out there thoughMainly im after this 2: - Bare gti inlet manifold £5 - Gti throttle body with good sensors £5 And depending on shipping, this also: - 2x Gti cam cover and one blue one black coilpack cover £10 Could you get a shipping quote for the manifold + Throttle body? And the cam covers apart? Thanks mate RE: Rockers '6 Is back - osm2121 - 28-10-2014 Ok, after the Bare gti inlet manifold and the cam covers only, I´ve just seen the throttle body is sold. If you could tell me the weight, of manifold and covers I can check at ParcelMonkey for a quote. Im really interested! Thanks Rockers '6 Is back - rocker8742 - 28-10-2014 F*ck sorry mate I completely forgot about this lol will try and get you a weight ASAP have you got an email address as it makes contact a bit easier RE: Rockers '6 Is back - osm2121 - 12-11-2014 Oh! Didnt see this. Osm2121@gmail.com RE: Rockers '6 Is back - c.gerrard - 12-11-2014 Please can you sum up what has happened over the last few months? I seem to remember the engine coming out at one point??? Rockers '6 Is back - rocker8742 - 12-11-2014 Lol went to combe heater matrix pipe came off and blew the head Got it recovered home and bought a new lower mileage engine off dangti6 Fitted it and a load of new parts Mot'd and been running nicely since RE: Rockers '6 Is back - c.gerrard - 13-11-2014 Went out in style then ![]() New parts, as in a secret supercharger? Or boring standard parts? ![]() |