+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Dum-Dums VNT 2.1TD OEM+ Bianca Estate. (loads of pics and video now added) (/showthread.php?tid=15736)
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Ruan - 18-03-2014
Lol yeah, LDA spring out, no chance of LDA jammage then...
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 19-03-2014
Think I'd rather have some sort of proper fueling on boost control though
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Piggy - 19-03-2014
(19-03-2014, 01:00 AM)Dum-Dum Wrote: Think I'd rather have some sort of proper fueling on boost control though
What a girl
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Ruan - 19-03-2014
(19-03-2014, 01:00 AM)Dum-Dum Wrote: Think I'd rather have some sort of proper fueling on boost control though
Why?! The LDA is so badly calibrated after we've f*cked with it it makes no difference... Remember, LDA is a fuel *reducer* not an adder...
It restricts fuel off boost, but as you know, once you've tuned the pump you can't just floor it at any time anyway, all it does it mean that if you ram your foot to the carpet it emits slightly more smoke than if the LDA was connected. Once you've reached about 5psi of boost, it's rammed all the way down anyway and there's no more restriction of fuel.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 20-03-2014
Well today I have replaced my leaky gearbox oil seal (would be the long shaft side).
Removed the PAS ram and rest of the piping for it so I'm now almost completely de-PAS.
Measured up for a shorter AUX belt (6pk780) to get rid of the PAS pump.
Started swapping to a ph2 wiring loom to see if that makes various bits like glow plugs and tacho work any better lol.
Sadly its raining now
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - jammapic - 20-03-2014
Use an elastic belt for the aux setup mate.
I use one on mine, all it's running is the alternator.
JP
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 20-03-2014
Could do but belts are cheap
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - jammapic - 20-03-2014
I use one of these, requires no tensioners and works great...
http://www.ebay.co.uk/itm/FORD-FIESTA-1-6-16V-1-25I-16V-1-4-16V-01-08-Multi-Rib-Elastic-Fan-Drive-Belt-/301004848896?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4615497f00
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 20-03-2014
That one would be far too long but ill look into the elastic ones as loosing the tensioner would be another bonus.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Piggy - 20-03-2014
Yeah I be looking at those belts soon, guna go EPAS coz Im not a giant muscle man like you Dumdum!
Dum-Dums 2.1TD OEM+ Bianca Estate - devils_fuel - 20-03-2014
Good to see this is coming along Chris, painful but progression is made
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Niall - 20-03-2014
(20-03-2014, 06:49 PM)Piggy Wrote: Yeah I be looking at those belts soon, guna go EPAS coz Im not a giant muscle man like you Dumdum!
Be aware of how noisy the EPAS pumps are. If you have room for it in the bay, it should be drowned out by the engine but if its under the boot floor like mine, anything below 10mph and you can hear it. I need to put a jacket on it or something to quieten it down.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - DeeTurbo - 20-03-2014
(20-03-2014, 10:11 PM)Niall Wrote:(20-03-2014, 06:49 PM)Piggy Wrote: Yeah I be looking at those belts soon, guna go EPAS coz Im not a giant muscle man like you Dumdum!
Be aware of how noisy the EPAS pumps are. If you have room for it in the bay, it should be drowned out by the engine but if its under the boot floor like mine, anything below 10mph and you can hear it. I need to put a jacket on it or something to quieten it down.
Have you tried mounting it with rubber fixings?
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Niall - 20-03-2014
(20-03-2014, 10:17 PM)DeeTurbo Wrote:(20-03-2014, 10:11 PM)Niall Wrote:(20-03-2014, 06:49 PM)Piggy Wrote: Yeah I be looking at those belts soon, guna go EPAS coz Im not a giant muscle man like you Dumdum!
Be aware of how noisy the EPAS pumps are. If you have room for it in the bay, it should be drowned out by the engine but if its under the boot floor like mine, anything below 10mph and you can hear it. I need to put a jacket on it or something to quieten it down.
Have you tried mounting it with rubber fixings?
Its on its standard rubber bracket. Ive mounted it under the boot floor but cut a hole in the boot floor which brought the cap through flush with the floor. It a whine more than a rattle!
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 21-03-2014
Yep well aware of how noisy they are, had one on my black 306. I'm not going to put one on as no PAS is awesome.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 21-03-2014
Well i now have a working speedo again but have sadly lost 100k off my total. Still havent got the rev counter working. forgot the late 3 plug HDis have different wiring to the early ones so need to rob a section off an early HDi loom and make a patch cable. New loom also hasnt fixed the glow plug wiring but such is life.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - silverzx - 21-03-2014
Looking forward to seeing this beast!
Remind me what turbo its running.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Grant - 21-03-2014
Good progress mate. Quite a list of things to do from what you were saying to me the other day!
Get that next purchase lined up!!!!
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - ozonehostile - 21-03-2014
It's a t2 iirc?
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - silverzx - 21-03-2014
Buy my TD04L for it. You know it makes sense.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Midnightclub - 21-03-2014
If it's the stock 2.1 blower, it is a TD04 variant of some sort
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Piggy - 21-03-2014
(21-03-2014, 05:03 PM)Midnightclub Wrote: If it's the stock 2.1 blower, it is a TD04 variant of some sort
No they're not mate. They smaller than that.
They are T2 sized. Mine was a T2 and Dumdums original was similar..some had the k14.
And I dont think a td04 has enough puff for it tbh, my GT2056s is starting to feel too small
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 21-03-2014
Mines not running a standard turbo. its had a new one at some point and just has a makers plaque with a hand written serial number on like you get with a hybrid.
Anyway, it wont be getting a TD04 or a GT20 as I still have the GT2359V in the garage.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Ruan - 21-03-2014
2.1s came with a TD04 09B or a TBO251 IIRC.
Quote:605 TD XUD11ATE 115 2.1/4 D TDO4 49177-07900 96 005 294 80
Really late ones came with a GT1549S
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 22-03-2014
Baby td04 then.
Still got a huge snagging list in my head, need to write it down and start crossing bits off.
RE: Dum-Dums 2.1TD OEM+ Bianca Estate - Dum-Dum - 22-03-2014
So ignoring all the things that I need to do to make the engine run properly I have bought myself some very big Non OEM shinys. I'd like to say becauseracecar but its more becausesixfootfourinchesandneedlegroom
[attachment=14541]
[attachment=14542]
[attachment=14543]
They've come with runners but I'm not sure if I'm going to actually use them. I'm going to make sub frames out of 3mm steel plate and then cover any showing bits of metal with a spare boot carpet to keep it looking factory (after painting it first). Not gonna use harnesses, got some rear seat seat belt plugs for the original belt to plug into. These will just get bolted through the plate (and a second strengthening plate).
RE: Dum-Dums 2.1TD OEM+ Bianca Estate (big shinys post 416) - Niall - 22-03-2014
Ooooh i like them. What are they from?
RE: Dum-Dums 2.1TD OEM+ Bianca Estate (big shinys post 416) - Grant - 22-03-2014
Those seats are lush man. Did t realise you were getting them so soon :p
RE: Dum-Dums 2.1TD OEM+ Bianca Estate (big shinys post 416) - Toms306 - 22-03-2014
Mmm, they look comfy!
Dum-Dums 2.1TD OEM+ Bianca Estate (big shinys post 416) - devils_fuel - 22-03-2014
Awesome seats mate, best sort the niggling issues first but then saying that they would be comfy in the house