+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Photos and Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=20)
+--- Forum: 306 Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=3)
+--- Thread: Paul's estate mk2 - air intake on (/showthread.php?tid=29066)
RE: Paul's estate mk2 - Paul_13 - 07-02-2016
They're not a straight fit! Had to bend a lot of metal out the way probably took half hour
Got them 2nd hand but lynx engineering (rich w) sells the kit.
I've just replaced the rear beam mounts to solid items as well
RE: Paul's estate mk2 - Alan_M - 07-02-2016
Watching with interest regarding the turbo change. Been thinking about it myself, maybe once the 205 is sorted....
Don't suppose there is any news on the GTi6 bars and XUDT crank?
RE: Paul's estate mk2 - Paul_13 - 07-02-2016
Gti6 bars are out
I need to pop to Ryan's to get the engine crane so I'll grab the crank while I'm there
RE: Paul's estate mk2 - powerandtorque - 08-02-2016
(07-02-2016, 08:22 PM)Alan_M Wrote: Watching with interest regarding the turbo change. Been thinking about it myself, maybe once the 205 is sorted....
Good to see that you're planning your retirement projects already...
RE: Paul's estate mk2 - Alan_M - 09-02-2016
(07-02-2016, 08:56 PM)Paul_13 Wrote: Gti6 bars are out
I need to pop to Ryan's to get the engine crane so I'll grab the crank while I'm there
Very much appreciated Paul!
(08-02-2016, 08:47 AM)powerandtorque Wrote:(07-02-2016, 08:22 PM)Alan_M Wrote: Watching with interest regarding the turbo change. Been thinking about it myself, maybe once the 205 is sorted....
Good to see that you're planning your retirement projects already...
Very funny beatnik......the idea is there, that's the first step!
RE: Paul's estate mk2 - powerandtorque - 09-02-2016
(09-02-2016, 12:00 PM)Alan_M Wrote: Very funny beatnik......the idea is there, that's the first step!
Too many ideas and not enough implementation of said ideas!
RE: Paul's estate mk2 - Paul_13 - 13-02-2016
Desperate to get working on this turbo!
going to chat with Ryan later see if he can make me a plate
RE: Paul's estate mk2 - Paul_13 - 13-02-2016
Got the plate off Rryan Cheers for that bud. Should be nice and easy to make this up after looking at it
RE: Paul's estate mk2 - Paul_13 - 14-02-2016
I've got everything apart from the air intake sorted which is worrying me http://306oc.co.uk/forum/showthread.php?tid=23020&page=10 same prob as Dr jekyll etc.
Other option is like what is shown on there and bring it up between the cambelt and bulkhead but I ideally want to retain the standard air box...
I'm going to do a bit of research and see what the 307 air intake is like for the rfh4
If not modify the 406 one I've got.
Do people just link the pipes on the egr warmer/cooler directly behind the rocker cover? I'll be doubt away with the whole egr system
RE: Paul's estate mk2 - Paul_13 - 14-02-2016
http://m.ebay.co.uk/itm/2001-2008-PEUGEOT-307-2-0-HDI-ESTATE-AIR-BREATHER-INTAKE-PIPE-964206088-/141857157173?nav=SEARCH
Hmm
RE: Paul's estate mk2 - Paul_13 - 14-02-2016
![[Image: DSC00021_zpsvf5teyx1.jpg]](http://s1224.photobucket.com/user/paul13205/media/DSC00021_zpsvf5teyx1.jpg.html)
Another option shamelessly stolen from uberderv
RE: Paul's estate mk2 - Poodle - 14-02-2016
That's a beautiful bit of pipe and a brilliant idea.
RE: Paul's estate mk2 - Paul_13 - 14-02-2016
If you've removed all the egr stuff, you should be able to move the air intake out slightly more to miss the egr port on the 307 hdi mani. Looks like there's enough space
RE: Paul's estate mk2 - Uberderv - 15-02-2016
What about cutting the egr port off and welding it for more space?
RE: Paul's estate mk2 - Paul_13 - 15-02-2016
Was thinking of doing that to be honest, not too confident welding cast if I'm honest
RE: Paul's estate mk2 - Uberderv - 15-02-2016
Or using oval pipe for the upper section which goes into a 180 degree silicone reducer. Can't help on the welding other than you'd have to use a pack of dissimilar metal rods and try and preheat/controlled cool down. Seen it done before with good results.
RE: Paul's estate mk2 - Paul_13 - 21-02-2016
Started work on the manifold
![[Image: 20160221_164913_zpslvp1bcvy.jpg]](http://s1224.photobucket.com/user/paul13205/media/20160221_164913_zpslvp1bcvy.jpg.html)
![[Image: 20160221_173029_zps6exrv99h.jpg]](http://s1224.photobucket.com/user/paul13205/media/20160221_173029_zps6exrv99h.jpg.html)
Pikey!
Got one of the manifold studs out, one snapped and I gave up as I lost daylight
RE: Paul's estate mk2 - Alan_M - 25-02-2016
(21-02-2016, 07:54 PM)Paul_13 Wrote: Started work on the manifold
Is that a bag rust by your foot?
RE: Paul's estate mk2 - Ruan - 25-02-2016
It's a Ford isn't it?
RE: Paul's estate mk2 - powerandtorque - 25-02-2016
(25-02-2016, 04:14 PM)Ruan Wrote: It's a Ford isn't it?
eBay advert Wrote:"Requires light restoration, easy project"
RE: Paul's estate mk2 - Paul_13 - 25-02-2016
my previous cars all rolled into one
RE: Paul's estate mk2 - powerandtorque - 25-02-2016
I'm not sure your cars generally last long enough to get to the point of rusting...
RE: Paul's estate mk2 - Paul_13 - 25-02-2016
Oi....
I've owned your old car for nearly 3 years I think now.
My silver gti was the longest standing that was 6/7 years I think
Scary thing is, I've owned a 205 for over 10 years now. Got my first one at 16 and I'm 27, had a brief break in between
RE: Paul's estate mk2 - Paul_13 - 28-02-2016
![[Image: 20160228_104826_zpsckxijj9c.jpg]](http://s1224.photobucket.com/user/paul13205/media/20160228_104826_zpsckxijj9c.jpg.html)
Just seeing what angle I need to clock the turbo, nice and easy to clock these!
I'm guessing on a hdi its a banjo bolt on the oil feed? I'm going to whip the union connector out of the gt20, hopefully from what bash said it should fit. I'm planning on putting the oil feed at the same angle as the hdi turbo so I can literally just put the hdi oil feed on. Same with the oil return if the flanges are the same
![[Image: 20160228_111823_zpspbk5qge9.jpg]](http://s1224.photobucket.com/user/paul13205/media/20160228_111823_zpspbk5qge9.jpg.html)
Precision engineering
RE: Paul's estate mk2 - Paul_13 - 28-02-2016
![[Image: 20160228_144805_zpsdlsaggjc.jpg]](http://s1224.photobucket.com/user/paul13205/media/20160228_144805_zpsdlsaggjc.jpg.html)
Out with the old in with the new ones
£150 from Peter lloyd racing
RE: Paul's estate mk2 - Alan_M - 28-02-2016
What spec Bilstein?
RE: Paul's estate mk2 - Paul_13 - 28-02-2016
Group n 205
Paul's estate mk2 - gt2052s going on soon - dr_jekyll - 01-03-2016
You wally! If you asked if send you a card template for the adapter! Mine matches up beautifully!
![[Image: bba77d271c8ce9dc0bbb8c4bc914c773.jpg]](http://uploads.tapatalk-cdn.com/20160301/bba77d271c8ce9dc0bbb8c4bc914c773.jpg)
As for intke thats best ive got atm. Seen the other you posted from ubederv, looks epic but found a few clearance issues with the brake servo when looking closer. Will tell you next week how i get on as its d-day for the turbo fitting
RE: Paul's estate mk2 - gt2052s going on soon - Paul_13 - 01-03-2016
Mines a different bolt pattern to yours unfortunately
Yeah if you could, I'll buy your other 306 hdi air intake pipe you if you get out of in one piece
RE: Paul's estate mk2 - gt2052s going on soon - Paul_13 - 03-03-2016
New plate is here
I'll get round to doing it tonight if I get time