Post Reply 
XUD9 Engine guide
mark_airey Offline
Living for the 306
Registered users - Donated

Posts: 3,796
Joined: Dec 2011
Reputation: 19
Location: Northwest (Cumbria)
Car: Ph2 DT with big Snail.....
Post: #1
XUD9 Engine guide
OK I found this and thought I would share as it contains a lot of useful info, there is a page full or torque settings and its far more useful than the Haynes manual in general as its pretty engine specific!

Its not the exact same engine as its for the XUD9AI not the XUD9TE but it is pretty much exactly the same but some things may differ slightly!

If this works it should be attached to this post as a PDF file for your viewing pleasure.

Hope some people find this helpful and it may be a good thing to have as a "sticky" maybe?


Attached File(s)
.pdf  XUD9.pdf (Size: 2 MB / Downloads: 698)

Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
19-05-2012 12:25 PM
Visit this user's website Find all posts by this user Quote this message in a reply
ginge191 Offline
Professional Jungle Ginger
Registered users - Donated

Posts: 6,958
Joined: Dec 2011
Reputation: 34
Location: Isle of Wight
Car: GTI 6
Post: #2
Re: XUD9 Engine guide
Wow, some excellent information in there including torque settings!

Great find there mate! Sticky is needed for sure!

Diablo '6 - 55k
19-05-2012 12:29 PM
Find all posts by this user Quote this message in a reply
Watto Offline
Newbie

Posts: 11
Joined: May 2012
Reputation: 0
Location:
Car: Daily drive D turbo...
Post: #3
Re: XUD9 Engine guide
Yeah good stuff!!
19-05-2012 02:35 PM
Find all posts by this user Quote this message in a reply
mark_airey Offline
Living for the 306
Registered users - Donated

Posts: 3,796
Joined: Dec 2011
Reputation: 19
Location: Northwest (Cumbria)
Car: Ph2 DT with big Snail.....
Post: #4
Re: XUD9 Engine guide
I'm going to bump this before it disappears, maybe I should have put it into the "Guides" section, just thought it might be more appropriate in here but maybe not as it seems that nobody cares lmao Tongue

Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
21-05-2012 07:16 AM
Visit this user's website Find all posts by this user Quote this message in a reply
Matt Offline
AKA Dexter AKA Sugar
Registered users - Donated

Posts: 12,587
Joined: Dec 2011
Reputation: 50
Location:
Car: Pov. Spec White '6
Post: #5
XUD9 Engine guide
Made it a sticky Wink

[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]

TEAM CONROD SHITTING RALLYE!
21-05-2012 07:18 AM
Find all posts by this user Quote this message in a reply
darrenjlobb Online
Team Chronic Boost!
Moderators

Posts: 3,673
Joined: Dec 2011
Reputation: 35
Location: Cornwall
Car: 1996 306 DT M-TDI/16
Post: #6
Re: XUD9 Engine guide
Nice one Mark, tonnes of usefull info in there....

www.darrenjlobb.co.uk
Team Chronic Boost
[Image: sigi-2.png]
21-05-2012 07:27 AM
Visit this user's website Find all posts by this user Quote this message in a reply
mark_airey Offline
Living for the 306
Registered users - Donated

Posts: 3,796
Joined: Dec 2011
Reputation: 19
Location: Northwest (Cumbria)
Car: Ph2 DT with big Snail.....
Post: #7
Re: XUD9 Engine guide
Matt Wrote:Made it a sticky Wink

Fanks Matt Smile

darrenjlobb Wrote:Nice one Mark, tonnes of usefull info in there....

This was my thinking, it pretty much tells you how to strip and rebuild an entire XUD engine!

Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
21-05-2012 07:34 AM
Visit this user's website Find all posts by this user Quote this message in a reply
ginge191 Offline
Professional Jungle Ginger
Registered users - Donated

Posts: 6,958
Joined: Dec 2011
Reputation: 34
Location: Isle of Wight
Car: GTI 6
Post: #8
Re: XUD9 Engine guide
mark_airey Wrote:This was my thinking, it pretty much tells you how to strip and rebuild an entire XUD engine!

* Darren has just lost 100 youtube subscribers *

/canofworms

Diablo '6 - 55k
21-05-2012 07:35 AM
Find all posts by this user Quote this message in a reply
mark_airey Offline
Living for the 306
Registered users - Donated

Posts: 3,796
Joined: Dec 2011
Reputation: 19
Location: Northwest (Cumbria)
Car: Ph2 DT with big Snail.....
Post: #9
Re: XUD9 Engine guide
ginge191 Wrote:
mark_airey Wrote:This was my thinking, it pretty much tells you how to strip and rebuild an entire XUD engine!

* Darren has just lost 100 youtube subscribers *

/canofworms

lmao there is no replacement for a video when you are trying to work out how the hell you remove something though Tongue

Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
21-05-2012 07:40 AM
Visit this user's website Find all posts by this user Quote this message in a reply
Jtrigga Offline
Active Member

Posts: 638
Joined: Dec 2011
Reputation: 3
Location: Gillingham Kent
Car: 306 D-turbo
Post: #10
Re: XUD9 Engine guide
Very useful mate just had a quick flick through.

Bye Bye D-Turbo
Phase 1 GTi-6 now has a new owner
Rolling in the: Phase 3 HDI Wagon

The current estate project: http://306oc.co.uk/forum/thread-22237.html
21-05-2012 07:54 AM
Find all posts by this user Quote this message in a reply
Ruan Offline
Thinks he knows everything, but he doesn't...
Moderators

Posts: 3,860
Joined: Dec 2011
Reputation: 49
Location: Bicester/Gloucester/Cornwall
Car: Moonstone DT
Post: #11
Re: XUD9 Engine guide
Quote:Maximum fuel flow and speed adjustments are sealed and should only be unsealed by a CAV Lucas ROTODIESEL service dealer.

Whoops! Oh well!!

[Image: 5chc42.jpg]

Nanstone GTD5 GT17S - XUD9TE - Awaiting Win Motor and Win Turbo
Black GT20V XUD9TE 306 Ph2 DT - Sorely Missed.
Volvo V50 2.0D SE - Daily cruise wagon. Heated Leathers, Premium Audio. Epic cruise barge.
21-05-2012 07:56 AM
Find all posts by this user Quote this message in a reply
mark_airey Offline
Living for the 306
Registered users - Donated

Posts: 3,796
Joined: Dec 2011
Reputation: 19
Location: Northwest (Cumbria)
Car: Ph2 DT with big Snail.....
Post: #12
Re: XUD9 Engine guide
Ruan Wrote:
Quote:Maximum fuel flow and speed adjustments are sealed and should only be unsealed by a CAV Lucas ROTODIESEL service dealer.

Whoops! Oh well!!

Hehe, there are some amusing translations in it too in places lol

Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
21-05-2012 08:00 AM
Visit this user's website Find all posts by this user Quote this message in a reply
n0v0s Offline
Active Member

Posts: 416
Joined: Dec 2011
Reputation: 2
Location:
Car:
Post: #13
Re: XUD9 Engine guide
exceeellent work mark!

Now that my exams have finished, i'm going full on and stripping/building up my spare engine. This will come in very handy! Missed boost sooo bad - quite literally as turbo hose popd off yet again. xuds are seriously booollaaacks without boost man, library runs were disgusting.. anyway cheers!

Now somebody sell me some cheaaap ass hdi rods!

[Image: brokendown-1-1-1.jpg]


Dturbo GT2259s build thread;
http://306oc.co.uk/forum/thread-3692.html

Daily driver; 330d Msport (doesn't blow up!)
22-05-2012 03:57 PM
Find all posts by this user Quote this message in a reply
silverzx Offline
Living for the 306
Registered users - Donated

Posts: 3,684
Joined: Dec 2011
Reputation: 10
Location: Somerset
Car: 205 DTurbo
Post: #14
Re: XUD9 Engine guide
n0v0s Wrote:exceeellent work mark!

Now that my exams have finished, i'm going full on and stripping/building up my spare engine. This will come in very handy! Missed boost sooo bad - quite literally as turbo hose popd off yet again. xuds are seriously booollaaacks without boost man, library runs were disgusting.. anyway cheers!

Now somebody sell me some cheaaap ass hdi rods!

Probably cheapest to go remove them from a scrappy engine..?


S14 Zenki Drift Project Thread
306 DTurbo Project Thread
Punto Grande Daily Picture Thread
22-05-2012 03:58 PM
Find all posts by this user Quote this message in a reply
n0v0s Offline
Active Member

Posts: 416
Joined: Dec 2011
Reputation: 2
Location:
Car:
Post: #15
Re: XUD9 Engine guide
You reckon? Probs not round Birmz, most of the remaining scrappies here have major attitude problems.. act all superior and have inflated prices.. All the gd places have shut up shop looong ago, seriously miss clambering over stacked cars whilst removing bits off a car wobbling away on the roof of another balanced with a piece of wood Sad lol

Ill search ebay for a hdi half block, get the shells that way too

[Image: brokendown-1-1-1.jpg]


Dturbo GT2259s build thread;
http://306oc.co.uk/forum/thread-3692.html

Daily driver; 330d Msport (doesn't blow up!)
22-05-2012 04:54 PM
Find all posts by this user Quote this message in a reply
londondan86 Offline
Living for the 306
Registered users - Donated

Posts: 1,602
Joined: Dec 2011
Reputation: 10
Location: Wrexham
Car: 306 D Turbo
Post: #16
Re: XUD9 Engine guide
Only just had a read through. Good find! Tongue

Supercharged XUD Project - Project Thread
22-05-2012 05:31 PM
Find all posts by this user Quote this message in a reply
nooboy Offline
I'm new, be nice

Posts: 10
Joined: Apr 2012
Location:
Car:
Post: #17
Re: XUD9 Engine guide
Thanks
22-05-2012 09:54 PM
Find all posts by this user Quote this message in a reply
td_dan Offline
Starting to Live for the 306
Registered users - Donated

Posts: 990
Joined: Dec 2011
Reputation: 4
Location: Birmingham
Car: 306 gti6 and 205 1.9dt
Post: #18
Re: XUD9 Engine guide
n0v0s try hoppers on electric avenue, aston i spend a lot of time there and crawford street saltley, and theres 1 in hall green a moseleySmile

LAPTOP TECHNICIAN ALWAYS HERE TO HELP JUST ASK
22-05-2012 11:30 PM
Find all posts by this user Quote this message in a reply
Dave Offline
Dave the Destroyer

Posts: 1,427
Joined: Dec 2011
Reputation: 8
Location: Midlands
Car: Dtractor
Post: #19
Re: XUD9 Engine guide
Piston protrusion over deck, jesus thats some serious anal about a gasket thickness! Big Grin

[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
23-05-2012 01:27 AM
Find all posts by this user Quote this message in a reply
mark_airey Offline
Living for the 306
Registered users - Donated

Posts: 3,796
Joined: Dec 2011
Reputation: 19
Location: Northwest (Cumbria)
Car: Ph2 DT with big Snail.....
Post: #20
Re: XUD9 Engine guide
Dave Wrote:Piston protrusion over deck, jesus thats some serious anal about a gasket thickness! Big Grin

lmao not really how you roll is it, hehe

Thickest one they make to help and drop compression a bit ................. job done Big Grin works for me anyhoo!

Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
23-05-2012 06:55 AM
Visit this user's website Find all posts by this user Quote this message in a reply
Dave Offline
Dave the Destroyer

Posts: 1,427
Joined: Dec 2011
Reputation: 8
Location: Midlands
Car: Dtractor
Post: #21
Re: XUD9 Engine guide
Am on thinnest to help stop it failing now with decomp

[Image: 22f2b6b2-758b-4c1c-96fb-6fa9c6059b13_zpsf306b56b.jpg]
23-05-2012 11:21 AM
Find all posts by this user Quote this message in a reply
n0v0s Offline
Active Member

Posts: 416
Joined: Dec 2011
Reputation: 2
Location:
Car:
Post: #22
Re: XUD9 Engine guide
Td dan, cheers I'll ask my dad, see if he knows them.

Can anyone confirm whether hdi rods from a snapped Campbelt engine will be straight and useable?

Apparently only the followers break as a protective mechanism so rods should be ok.

[Image: brokendown-1-1-1.jpg]


Dturbo GT2259s build thread;
http://306oc.co.uk/forum/thread-3692.html

Daily driver; 330d Msport (doesn't blow up!)
23-05-2012 03:00 PM
Find all posts by this user Quote this message in a reply
Ruan Offline
Thinks he knows everything, but he doesn't...
Moderators

Posts: 3,860
Joined: Dec 2011
Reputation: 49
Location: Bicester/Gloucester/Cornwall
Car: Moonstone DT
Post: #23
Re: XUD9 Engine guide
Rods'll be fine.

[Image: 5chc42.jpg]

Nanstone GTD5 GT17S - XUD9TE - Awaiting Win Motor and Win Turbo
Black GT20V XUD9TE 306 Ph2 DT - Sorely Missed.
Volvo V50 2.0D SE - Daily cruise wagon. Heated Leathers, Premium Audio. Epic cruise barge.
23-05-2012 07:57 PM
Find all posts by this user Quote this message in a reply
kazzy_306 Offline
I'm new, be nice

Posts: 4
Joined: Mar 2012
Location:
Car:
Post: #24
Re: XUD9 Engine guide
40NM + 60 degrees for the crankshaft bolt really Confused thought it would be tighter than that lol
02-06-2012 02:12 PM
Find all posts by this user Quote this message in a reply
mark_airey Offline
Living for the 306
Registered users - Donated

Posts: 3,796
Joined: Dec 2011
Reputation: 19
Location: Northwest (Cumbria)
Car: Ph2 DT with big Snail.....
Post: #25
Re: XUD9 Engine guide
kazzy_306 Wrote:40NM + 60 degrees for the crankshaft bolt really Confused thought it would be tighter than that lol

Thats what these things are for Wink

Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
02-06-2012 07:35 PM
Visit this user's website Find all posts by this user Quote this message in a reply
c.gerrard Offline
Starting to Live for the 306
Registered users - Donated

Posts: 887
Joined: Apr 2012
Reputation: 2
Location: Lakes District
Car: 1.9 XUD
Post: #26
RE: XUD9 Engine guide
This will come in very handy over the next few days Big Grin

05-07-2012 08:20 PM
Find all posts by this user Quote this message in a reply
Jonny81191 Online
Came out of the Closet
Registered users - Donated

Posts: 4,352
Joined: Dec 2011
Reputation: 49
Location: Eastleigh
Car: S16 and Xud Cabby
Post: #27
RE: XUD9 Engine guide
(05-07-2012 08:20 PM)c.gerrard Wrote:  This will come in very handy over the next few days Big Grin

Days?

Years..

[Image: attachment.php?aid=18407]
05-07-2012 08:23 PM
Find all posts by this user Quote this message in a reply
mattgreene Offline
Active Member

Posts: 249
Joined: Oct 2013
Reputation: 1
Location: Cambridgeshire
Car: 306 HDi
Post: #28
RE: XUD9 Engine guide
Thats spot on thanks for the great find
28-10-2013 07:26 PM
Find all posts by this user Quote this message in a reply
jonas306 Offline
I'm new, be nice

Posts: 74
Joined: Feb 2014
Location: Tunbridge Wells
Car:
Post: #29
RE: XUD9 Engine guide
Really good stuff!
28-08-2014 11:54 AM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)